Received: 2024-06-25
Revised: 2024-08-16
Accepted: 2024-09-02
Published 2024-12-15

This work is licensed under a Creative Commons Attribution 4.0 International License.
How to Cite
PDF views: 71
HTML views: 9
Abstract
Jet engines consume a lot of power at start time which makes it necessary to use a ground power supply unit (GPU). The GPU must provide the aircraft’s demanded power at the start point only. One of the most important factors in supplying the required power for jet engines is to provide the necessary quality for the transmission of electricity to the aircraft. There are a lot of standards to check the quality of the starter among them MIL-STD-704 military standard is one of the most frequently used ones. This standard governs two principles of the power quality and transmitted power to flying vehicles. A GPU system is designed and implemented in this paper to meet the requirements of MIL-STD-704. This paper proposes a new approach to implement a starter system for turbo-shaft engines. The transformer tap changer mechanism is used for voltage control and the parameters of the transformer are also optimized using Maxwell software to reduce losses. The power quality value is achieved based on an adaptive smart filtering system implemented at the output terminal of the starter system. This smart filter is designed to be controlled based on a support vector machine (SVM) machine learning scheme. Experimental results are provided to illustrate the successful and high-quality supply of power needed to start a helicopter.
Keywords
- Ground power supply,
- Helicopter starter,
- Support vector machine,
- Transformer design,
- Smart filter
References
- Buticchi G., Costa L.F., Liserre M., Multi-port DC/DC converter for the electrical power distribution system of the more electric aircraft. Mathematics and Computers in Simulation. 2019 Apr 1;158:387-402., https://doi.org/10.1016/j.matcom.2018.09.019
- Rivera M., Faundez D., Kolar J., Wheeler P., Besoaín F., Riveros J.A., A New Ground Power Unit (GPU) Supply for Aircraft Applications. In2018 IEEE Biennial Congress of Argentina (ARGENCON) 2018 Jun 6 (pp. 1-6). IEEE., https://doi.org/10.1109/ARGENCON.2018.8646311
- Abarzadeh M., Al-Haddad K., An improved active-neutral-point-clamped converter with new modulation method for ground power unit application. IEEE Transactions on Industrial Electronics. 2018 Apr 12;66(1):203-14., https://doi.org/10.1109/TIE.2018.2826484
- Arevalo, S.L., Zanchetta P., Wheeler, P.W., Trentin, A. and Empringham L., 2009. Control and implementation of a matrix-converter-based AC ground power-supply unit for aircraft servicing. IEEE Transactions on Industrial Electronics, 57(6), pp.2076-2084., https://doi.org/10.1109/TIE.2009.2034180
- Selema A., Osheba D.S., Tahoon S.M., El‐Shanawany M. M., Design and analysis of a three‐phase brushless flux switching generator for aircraft ground power units. IET Electric Power Applications. 2019 Feb;13(2):154-61., https://doi.org/10.1049/iet-epa.2018.5307
- Targino A.C., Machado B.L., Krecl P., Concentrations and personal exposure to black carbon particles at airports and on commercial flights., Transportation Research Part D: Transport and Environment. 2017 May 1;52:128-38., https://doi.org/10.1016/j.trd.2017.03.003
- Wang L., Zhang Z., Huang C., Tsui K.L., A GPU-accelerated parallel Jaya algorithm for efficiently estimating Li-ion battery model parameters. Applied Soft Computing. 2018 Apr 1;65:12-20., https://doi.org/10.1016/j.asoc.2017.12.041
- Chen J., Wang C., Chen J., Investigation on the selection of electric power system architecture for future more electric aircraft, IEEE Transactions on Transportation Electrification. 2018 Jan 11;4(2):563-76., https://doi.org/10.1109/TTE.2018.2792332
- Sarimuthu C.R., Ramachandaramurthy V.K., Agileswari K.R., Mokhlis H., A review on voltage control methods using on-load tap changer transformers for networks with renewable energy sources. Renewable and Sustainable Energy Reviews. 2016 Sep 1;62:1154-61., https://doi.org/10.1016/j.rser.2016.05.016
- International military aviation standard, Mil-std-704, air craft electrical power characteristics S, version F
- Szczepankowski A., Szymczak J., Initiation of damage to the hot part of aircraft turbine engines. Prace Naukowe Instytutu Technicznego Wojsk Lotniczych. 2016;38(1):61., https://doi.org/10.1515/afit-2016-0006
- McLyman C.W., Transformer and inductor design handbook. CRC press; 2004 Mar 31. , https://doi.org/10.1201/9780203913598
- Casmero, Joe, and Rich Barden. "FEATURES-Transformer Bobbin and Core Selection Involves Interdisciplinary Design and Cost Issues-Transformer core and bobbin selection go hand-in-hand." PCIM Power Electronic Systems 26, no. 10 (2000): 20-35.,
- E-Core and Lamination Size Cross Reference, https://www.lodestonepacific.com/wp-content/uploads/2021/08/Bobbin-E-Core-Lam-Cross-Reference.pdf
- Zhang H., Kou B., Zhang L., Jin Y., Digital controller design based on active damping method of capacitor current feedback for auxiliary resonant snubber inverter with LC filter. Applied Sciences. 2016 Nov 22;6(11):377., https://doi.org/10.3390/app6110377
- Ring M., Eskofier B.M., An approximation of the Gaussian RBF kernel for efficient classification with SVMs. Pattern Recognition Letters. 2016 Dec 1;84:107-13., https://doi.org/10.1016/j.patrec.2016.08.013
- Tan Y., Wang J. A support vector machine with a hybrid kernel and minimal Vapnik-Chervonenkis dimension. IEEE Transactions on knowledge and data engineering. 2004 Mar 3;16(4):385-95., https://doi.org/10.1109/TKDE.2004.1269664
- Abarzadeh M, Kojabadi HM., A static ground power unit based on the improved hybrid active neutral-point-clamped converter. IEEE Transactions on Industrial Electronics. 2016 Apr 21;63(12):7792-803., https://doi.org/10.1109/TIE.2016.2557314