Study of deformation microstructure of nickel samples at very short milling times: effects of addition of α-Al2O3 particles

Abstract

AbstractDeformation microstructure of pure Ni powder milled for short duration was studied. The microstructure, as obtained on the basis of Rietveld analysis and microstructural modeling, shows inhomogeneity and consists of âheavily deformedâ with twin faults probability and âslightly deformedâ components with varying dislocation densities. The modified WilliamsonâHall analysis was performed for both the subcomponents with the relevant scaling parameter. Attempts were made to elucidate the nature of dislocation present in the milled samples. The correction due to extra broadening from stacking fault was calculated from the refined values of twin fault probability. In-depth microstructural modeling with restrictedly random distribution of dislocation and a lognormal distribution of spherical particles were done for the two subcomponents to explore the inhomogeneous microstructure. The effect of α-Al2O3 addition is found in reduction in the Ni particle size and yielding more uniform size distribution. It is shown that X-ray line profile analysis is capable of modeling such inhomogeneous microstructure.