10.57647/j.jtap.2025.1902.17

Investigation of the structural and magnetical properties of polyaniline-nickel ferrite-carbon ternary composite layers

PDF
  • Zainab Jawad Jaber1,
  • Zhaleh Ebrahiminejad*2,
  • Somayeh Asgary2,
  • Amir Hoshang Ramezani2,
  1. Faculty of Converging Sciences and Technologies, Department of Physics, Science and Research Branch, Islamic Azad University, Tehran, Iran
  2. Department of Physics, West Tehran Branch, Islamic Azad University, Tehran, Iran

Received: 2024-11-30

Revised: 2025-01-02

Accepted: 2025-02-02

Published in Issue 2025-04-10

Copyright (c) 2025 Zainab Jawad Jaber, Zhaleh Ebrahiminejad, Somayeh Asgary, Amir Hoshang Ramezani (Author)

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

1.
Jawad Jaber Z, Ebrahiminejad Z, Asgary S, Ramezani AH. Investigation of the structural and magnetical properties of polyaniline-nickel ferrite-carbon ternary composite layers. J Theor Appl phys. 2025 Apr. 10;19(2):1-7. Available from: https://oiccpress.com/jtap/article/view/16587
Crossref
Scopus
Google Scholar
Europe PMC

PDF views: 358

Abstract

In the present research, the production of polyaniline-nickel ferrite-carbon composite layers is discussed experimentally. The carbon nanoparticles were prepared by green synthesis method. The different properties of these nanoparticles were studied using different analyzes such as X-ray diffraction patterns, infrared absorption spectroscopy, scanning electron microscope images, vibrating sample magnetometry, and atomic force microscope analyzes. The copper substrate will be used to show this ternary components polyanilinenickel ferrite-carbon and electrochemical method. The XRD pattern showed crystallinity nature for Nickelferrite nanoparticles. The results show that the saturation magnetization value for the polyaniline-nickel ferrite-carbon nanocomposite is 6 times bigger than the obtained value for nickel ferrite. The rod structure of carbon nanotubes shown in the AFM analysis indicated high surface roughness, which causes the waves to be captured by radars.

Keywords

  • Thin film,
  • Roughness,
  • Polyaniline,
  • Ternary composite,
  • Carbon nanoparticles
PDF

References

  1. Z. Jardon, M. Hinderdael, J. Ertveldt, and P. Guillaume. “Production assessment of hybrid directed energy deposition manufactured sample with integrated effective structural health monitoring channel (eSHM). ”. Procedia Structural Integrity, 34:32–38, 2021. doi: 10.1016/j.prostr.2021.12.005.
  2. Zh. Ebrahiminejad, S. F. Masoudis, R. S. Dariani, and S. S. Jahromi. “Thin film growth by using random shape cluster deposition.”. J. Chem. Phys., 137:154703, 2012. doi: 10.1063/1.4755956.
  3. C. Li, J. Zhang, J. Han, and B. Yao. “A numerical solution to the effects of surface roughness on water–coal contact angle.”. Scientific Reports, 11 (1):459, 2021. doi: 10.1038/s41598-020-80729-9.
  4. B. Bhushan. “Principles and applications of tribology.”. John Wiley & Sons, 1999.
  5. T. R. Thomas. “Rough Surfaces. ”. Imperial College Press, 1982.
  6. A.-L. Barab´asi and H. E. Stanley. “Fractal concepts in surface growth.”. Cambridge University Press, 1995. doi: 10.1017/CBO9780511599798.
  7. F. W. Bentrem, R. B. Pandey, and F. Family. “Roughening, deroughening, and nonuniversal scaling of the interface width in electrophoretic deposition of polymer chains.”. Physical Review E, 62:914, 2000. doi: 10.1103/Phys-RevE.62.914.
  8. F. W. Bentrem, J. Xie, and R. B. Pandey. “Interface relaxation in electrophoretic deposition of polymer chains: Effects of segmental dynamics, molecular weight, and field.”. Physical Review E, 65:41606, 2002. doi:10.1103/PhysRevE.65.041606.
  9. F. Family and T. s Vicsek. “Dynamics of fractal surfaces. ”. World Scientific, 1991.
  10. P. Meakin. “Fractals, scaling and growth far from equilibrium.”. Cambridge University Press, 1998.
  11. S. Mizani, R. Aliabadi, and H. Salehi. “Comparison of the effect of geometric shape and Cross-section of rod particles in biaxial and homeotropic phase formation. ”. Journal of Research on Many-body Systems, 11:56–67, 2021. doi: 10.22055/JRMBS.2021.16783.
  12. E. Sharafedini, H. Hamzehpour, S. Farhad Masoudi, and M. Sahimi. “Electrical conductivity of the films grown by ballistic deposition of rodlike particles.”. Journal of Applied Physics, 118(21), 2015. doi: 10.1063/1.4936548.1
  13. S. Basrour and L. Robert. “X-ray characterization of residual stresses in electroplated nickel used in LIGA technique. ”. Materials Science and Engineering: A, 288:270–274, 2000. doi: 10.1016/S0921-5093(00)00868-6.
  14. J. Volpp. “Behavior of powder particles on melt pool surfaces.”. The International Journal of Advanced Manufacturing Technology, 102:2201–2210, 2019. doi: 10.1007/s00170-018-03261-1.
  15. M. Rombouts, G. Maes, W. Hendrix, and E. Delarbre. “Surface finish after laser metal deposition.”. Physics Procedia, 41:810–814, 2013. doi: 10.1016/j.phpro.2013.03.152.
  16. F. Forgerini and W. Figueiredo. “Random deposition of particles of different sizes.”. Physical Review E, 79(4):041602, 2009. doi: 10.1103/Phys-RevE.79.041602.
  17. G. ´Ciri´c Marjanovi´c. “Recent advances in polyaniline composites with metals, metalloids and nonmetals.”. Synthetic Metals, 170:31–56, 2013. doi: 10.1016/j.synthmet.2013.02.028.
  18. C. Wang, Y. Shen, X. Wang, H. Zhang, and A. Xie. “Synthesis of novelNiZn-ferrite/polyaniline nanocomposites and their microwave absorptionproperties. ”. Mater. Sci. Semiconductor Proc., 16:77–82, 2013. doi: 10.1016/j.mssp.2012.06.015.
  19. P. Bhatt, R. B. Jotania, and R. Kumar. “Study of structural and magnetic properties of(Co–Cu)Fe2O4/PANI composites.”. Mater. Chem. Phys., 141: 406–415, 2013. doi: 10.1016/j.matchemphys.2013.05.034.
  20. M. B. Mohamed and K. El-Sayed. “Structural, magnetic and dielectric propertiesof PANI-Ni0.5Zn0.5Fe1.5Cr0.5O4 namocomposite.”. Composites Part B, 56:270–278, 2014. doi: 10.1016/j.compositesb.2013.08.038.
  21. V. Babayan, N. E. Kazantseva, I. Sapurina, R. Mouˇcka, J. Vilˇc´akov´a, and J. Stejskal. “Magnetoactive feature of in-situ polymerized polyaniline film developedon the surface of manganese-zinc ferrite.
  22. H. Sozeri, U. Kurtan, R. Topkaya, A. Baykal, and M. S. Toprak. “Polyaniline (PANI)-Co0.5Mn0.5Fe2O4 nanocomposite: synthesis characterization and magneticproperties evaluation.”. Ceram. Int., 39:5137–5143, 2013. doi: 10.1016/j.ceramint.2012.12.009.
  23. H. D. Kyomuhimbo and U. Feleni. “Electroconductive green metalpolyaniline nanocomposites: synthesis and application in sensors. ”. Electroanalysis, 35:202100636, 2023. doi: 10.1002/elan.202100636.
  24. S. Khan and Sh. Peshoria. “Polyaniline nanocomposites with doped ferrites as an electromagnetic shield.”. International Journal of Development Research, 4:1371–1376, 2014. doi: 10.37118/ijdr.2
  25. M. T. Ramesan. “Synthesis and characterization of magnetoelectric nanomaterial composed of Fe3O4 and polyindole. ”. Advances in Polymer Technology, 32:21362, 2013. doi: 10.1002/adv.21362.
  26. M. T. Ramesan and K. Surya. “Synthesis, characterization, and properties of cashew gum graft poly(acrylamide)/magnetite nanocomposites.”. Journal of Applied Polymer Science, 133:5431–5438, 2016. doi: 10.1002/app.43496.
  27. P. Jayakrishnan and M. T. Ramesan. “Synthesis, structural, magnetoelectric and thermal properties of poly (anthranilic acid)/magnetite nanocomposites.”. Polymer Bulletin, 74:3179–3198, 2017. doi: 10.1007/s00289-016-1883-0.
  28. P. Jayakrishnan, K. KJithin, K. Meera, and M. T. Ramesan. “Synthesis, characterization, magnetoelectric properties and gas sensing application of Poly(anthranilic acid-co-indole)/ magnetite nanocomposites.”. Journal of Thermoplastic Composite Materials, 36(6):2523–2542, 2023. doi: 10.1177/08927057221098969.
  29. T. Anjitha, T. Anilkumar, G. Mathew, and M. T. Ramesan. “Zinc ferrite @ polyindole nanocomposites: Synthesis, characterization and gas sensing applications. ”. Polymer Composites, 40(7):2802–2811, 2019. doi: 10.1002/pc.25088.
  30. M. Khairy and M. E. Gouda. “Electrical and optical properties of nickel ferrite/polyaniline nanocomposite.”. Journal of Advanced Research, 6:555–562, 2015. doi: 10.1016/j.jare.2014.01.009.
  31. G. D. Prasanna, R. L. Ashok, and H. S. Jayanna. “Synthesis and characterization of magnetic and conductive nickel ferrite–polyaniline nanocomposites. ”. Journal of Cmposite Material, 49(21), 2014. doi: 10.1177/0021998314552090.
  32. G. Singh, Y. Kumar, and S. Husain. “Nickel ferrite doped polyaniline composites: Synthesis and analysis for a high-performance symmetric pseudosupercapacitor.”. Energy Storage. doi: 10.1002/est2.525.
  33. P. Kolhar, B. Sannakki, M. Verma, S. V. Prabhakar, and M. Alshehri. “Synthesis, characterization and investigation of optical and electrical properties of polyaniline/nickel ferrite composites.”. Nanomaterials, 13(15):2223, 2023. doi: 10.3390/nano13152223.
  34. Y. K. Gautam, K. Sharma, S. Tyagi, A. Kumar, and B. Pal Singh. “Chapter 6 - Applications of green nanomaterials in coatings.”. Green Nanomaterials for Industrial Applications, 2022. doi: 10.1016/B978-0-12-823296-5.00014-9.3
  35. D. N. Chandrani, S. Ghosh, and A. R. Tanna. “Green synthesis for fabrication of cobalt ferrite nanoparticles with photocatalytic dye degrading potential as a sustainable effluent treatment strategy. ”. Journal of In-organic and Organometallic Polymers and Materials, 34:3100–3114, 2024. doi: 10.1007/s10904-023-02981-6.
  36. A. Chaudhari, T. Kaida, H. B. Desai, S. Ghosh, R. P. Bhatt, and A. R. Tanna. “Dye degradation and antimicrobial applications of manganese ferrite nanoparticles synthesized by plant extracts.”. Chemical Physics Impact, 5:100098, 2022. doi: 10.1016/j.chphi.2022.100098.
  37. Vadiraj K. T. and S. L. Belagali. “Characterization of polyaniline for optical and electrical properties.”. IOSR Journal of Applied Chemistry, (8):1, 2015. doi: 10.9790/5736-0801025356.
  38. N. Yadav, A. Kumar, P. S. Rana, D. S. Rana, M. Arora, and R. P. Pant. “Finite size effect on Sm3+ doped Mn0.5Zn0.5SmxFe2−xO4 (0 ≤ x ≤ 0.5) ferrite nanoparticles.”. Ceram. Int., 41:8623–8629, 2015. doi: 10.1016/j.ceramint.2015.03.072.
  39. K. Jalaiah and K. Vijaya Babu. “Structural, magnetic and electrical properties of nickel doped Mn-Zn spinel ferrite synthesized by sol-gel method. ”. J. Magn. Magn Mater, 423:275–280, 2017. doi: 10.1016/j.jmmm.2016.09.114.
  40. L. Li, Ch. Xiang, X. Liang, and B. Hao. “Zn0.5Cu0.4Cr0.5Fe1.46Sm0.04 ferrite and itsnanocomposites with polyaniline and polypyrolle: preparation and electro-magnetic properties.”. Synth. Met., 160:28–34, 2010. doi: 10.1016/j.synthmet.2009.09.026.
  41. R. M. Khafagy. “Synthesis, characterization, magnetic and electrical propertiesof the novel conductive and magnetic polyaniline/MgFe2O4 nanocomposite having the core–shell structure. ”. J. Alloys Compd., 509:9849–9857, 2011. doi: 10.1016/j.jallcom.2011.07.008.
  42. Q. Song and Z. J. Zhang. “Shape control and associated magnetic properties of spinelcobalt ferrite nanocrystals.”. J. Amer. Chem. Soc., 126: 6164–6168, 2004. doi: 10.1021/ja049931r.
  43. A. K. S. Molakeri, A. D. Shetkar, B. Raghunanda, and S. Kalyane. “Electrical and magnetic properties of polyaniline-nickel ferrite composites.”. International Journal on Emerging Technologies, 7(2):164–168, 2016. doi: 10.1166/jap.2017.1308.
  44. M. R. Patil and V. S. Shrivastava. “Adsorption of malachite green by polyaniline–nickel ferrite magnetic nanocomposite: an isotherm and kinetic study.”. Appl Nanosci, 5:809–816, 2015. doi: 10.1007/s13204-014-0383-5.