skip to main content
Menu
JTAP-01.10.2023

Journal of Theoretical and Applied Physics (JTAP)

Editor-in-Chief: Davoud Dorranian

Online ISSN: 2251-7235

Print ISSN: 2251-7227

Publishes Bimonthly

Original Article
Robust Mouse Tissue imaging by Plasmonic random laser

Given the major applications of optical random laser in the next generation devices, tissue imaging is proposed in this article by the aid of plasmonic random laser media. For this purpose, we use Rhodamine 6G as the main gain medium and fill it by Gold nanoparticles, Graphene and the mixture of them as random laser […]

182416
Growth and characterization of TiAlN nanoparticles using low-energy plasma focus device

AbstractIn this experimental study, a 1.5-kJ plasma focus device of Mather type was employed to grow titanium aluminum nitride (TiAlN) coatings at room temperature on 316 stainless steel sub-layer. The anode of the device was made of Titanium and Aluminium. A mixture of N2 and Ar gases was used as the work gas for TiAlN […]

Comparing the structural and magnetic properties of FePt/MgO/Si and FePt/Ag/Si granular nanolayers

AbstractThe properties of L10-FePt nanoparticles can be improved in the presence of MgO and Ag interlayers in direct sputtering and annealing method, respectively. Such properties are crystal and compound ordering, nanostructure and crystal orientation. In this work, FePt nanoparticles in ferromagnetic L10-fct phase were synthesized using sputtering method on Ag and MgO layers. According to […]

Effect of polyethylene glycol and propyltrimethoxysilane on structural and optical properties of zinc oxide nanoparticles synthesized by sol–gel process

AbstractZinc oxide nanoparticles (ZnO NPs) are prepared by sol–gel process, using both polyethylene glycol (PEG-400) as surfactant and propyltrimethoxysilane (PTMS) as capping agent. Surface modification is performed in situ procedure. The physical parameters such as strain and stress values are calculated via the Williamson–Hall plot (W&H) assuming a uniform deformation model (UDM) and uniform stress […]

Effect of different alcohols, gelatinizing times, calcination and microwave on characteristics of TiO2 nanoparticles synthesized by sol–gel method

AbstractIn this work, nanoparticles of titanium dioxide (TiO2) were synthesized by means of TiCl4 as precursor. Effects of alcohol type, calcination, gelatinizing time and microwave exposure on the particle size, morphology, crystallinity and particle phase are studied using XRD patterns and SEM images. Results showed that alcohols such as ethanol increased the particle size; calcination […]

Influence of chemical properties of liquid environment on the physical characteristics of laser ablation produced tungsten nanostructures

Impacts of the liquid environment on the characteristics of pulsed laser ablation (PLA) synthesized tungsten (W) nanostructures have been investigated. High purity W target was irradiated by the fundamental wavelength of a Q-switched Nd:YAG laser of 7 ns pulse width and 1 J/cm2 laser fluence in different liquid environments including distilled water, ethanol, acetone, and […]

Influence of chemical properties of liquid environment on the physical characteristics of laser ablation produced tungsten nanostructures