skip to main content
Menu
IJND-1

International Journal of Nano Dimension (Int. J. Nano Dimens.)

Editor-in-Chief: Dr. Khalil Pourshamsian; Director-in-Charge: Dr. Babak Sadeghi

Online ISSN: 2228-5059

Print ISSN: 2008-8868

Publishes Quarterly

Original Article
Effect of annealing and UV illumination on properties of nanocrystalline ZnO thin films

ZnO thin films with preferred orientation along the (002) plane were prepared onto the glass substrates by the sol-gel spin coating method for different post- annealing temperatures. The XRD study confirms that the thin films grown by this method have good crystalline hexagonal wurtzite structure. The optical band gap of the samples was determined from […]

Original Article
Structural, optical and dielectric studies in ZnO nanorods by microwave assisted method

ZnO nanorod was prepared by microwave assisted method. The crystal structure of the nano powders were confirmed by X-Ray diffraction analysis and the mean particle size was estimated by the Scherrer,s formula .The surface morphology of the nano particles were analyzed by   using SEM . The absorption spectrum of the material in the UV-Vis range […]

Original Article
Two component reaction for the synthesis of Quinolines in the presence of γ-Al2O3 and Cu/ZnO nanoparticles

Two-component reaction of 2-aminobenzophenones with acetylenic esters in the presence of γ-Al2O3 and Cu/ZnO as suitable heterogeneous catalysts has been studied. Nano γ-Al2O3 and Cu/ZnO showed high activities when used as surface catalysts for the synthesis of quinoline derivatives. After completion of the reaction, the catalyst was recovered and reused several times under the same […]

Original Article
Finite element modeling of polymer matrix nano-composites reinforced by nano-cylindrical fillers

A new three-dimensional unit cell model has been developed for modeling three constituent phases including inclusion, interphase and matrix. The total elastic modulus of nano-composite is evaluated.  Numerical results are in good agreement with the previous proposed theoretical modeling. Higher matrix and inclusion elastic modulus both can dramatically influence the total elastic modulus.

Original Article
Effect of metal nanoparticles on hardness in particleboard

Effects were studied of 200 ppm silver and copper nano-suspensions, with size range from 20 to 80 nm, on the hardness of particleboards produced at an industrial scale at the Iran-Choob Factory, Iran. Metal nano-suspensions were added to the mat at two levels of 100 and 150 milli-liters/kg dry weight wood particles, and the results […]

Original Article
Synthesis, characterization and investigation photocatalytic degradation of Nitro Phenol with nano ZnO and ZrO2

ZnO and ZrO2 photo catalysts were synthesized by sol-gel auto combustion method. The products were characterized by X-ray Diffraction (XRD) and Scanning Electron Microscopy (SEM). Structural and morphological properties of nano particles were investigated and the average crystalline size of ZnO and ZrO2 was obtained 44 and 51 nm, respectively. Also, photo catalytic degradation of […]

Original Article
Synthesis and characterization of α-Alumina membrane supports and the binding effect of Poly (Vinyl Alcohol)

Ceramic Ultrafiltration membranes are considered as an alternative for the treatment of both stable water-in-oil and oil-in-water emulsions proved to be more effective in comparison with other conventional techniques. In this study, symmetric macro-porous ceramic membranes are prepared through dry pressing of α-alumina powder and the addition of various binders including Poly (vinyl alcohol). The […]

Original Article
Increasing flexural strength and toughness of cement mortar using multi-walled Carbon nanotubes

In this study the effect of using multi-walled carbon nanotube (MWCNT) on flexural and compressive strengths, ultimate displacement and energy absorption capability of standard cement mortar considering different weight percentages of nanotubes as well as different dispersion methods has been investigated. Influential point in adding nanotubes to the composites is their proper dispersion, which is […]

Original Article
Solid state preparation of CdO nano-particles by thermolysis of a precursor as compacted nanosheet

A novel complex of cadmium (II) [CdL0.5(NO3)(H2O)](1), L= N,N-bis (O-hydroxyacetophenone) ethylene diamine, have been synthesized as single crystal and nano size. Compound 1 in nano size was obtained under sonochemical irradiation and has been characterized by IR, 1HNMR spectroscopy, X-ray powder diffraction (XRD) and scanning electron microscopy (SEM). The gray single crystal of compound 1 […]

Original Article
Change of diffused and scattered light with surface roughness of p-type porous Silicon

Porous silicon samples were prepared by electrochemical etching method for different etching times. The structural properties of porous silicon (PS) samples were determined from the Atomic Force Microscopy (AFM) measurements. The surface mean root square roughness (σ rms) changes as function of porosity were studied, and the influence of etching time on porosity and roughness […]