Interaction of Chrysosporium sps. and Aspergillus sps. with aqueous AgNO3 was investigated for synthesis of silver nanoparticles. Biological reduction and extracellular synthesis of silver nanoparticles in 28 hour at 270C and pH 5.6 was done. The nanometallic dispersion was characterized by surface plasmon absorbance measuring at 424 – 530 nm for Ag nanoparticles. High resolution […]
AlMCM-41 was applied for adsorption of methylene blue (MB) and auramine (AU) in single and binary component systems. In the single component systems, AlMCM-41 represents higher adsorption capacity for MB than AU with the maximal adsorption capacity of 2.07×10−4 and 1.15×10−4 mol/g at 25 ˚C for MB and AU, respectively. In the binary component system, […]
In this paper CuFe2O4, nanocrystalline powders were prepared. Also, the supported Cu ferrite was obtained by impregnation of the supports with Cu and Fe nitrates solutions, for calcination temperature 450 ºC. The samples were characterized by X-ray powder diffraction (XRD) and Fourier transform-infrared spectroscopy (FT-IR). In this investigation photocatalytic degradation of Acid red 206 in […]
In this paper, the modified Euler-Bernoulli beam model is presented to examine the influence of surface elasticity and residual surface tension on the critical force of axial buckling of nanotubes in the presence of rotary inertia. An explicit solution is derived for the buckling loads of microscaled Euler beams considering surface effects. The size-dependent buckling […]
This article describes an accurate subPico flowmeter bifurcatedin to liquid and gas flowrates less than 1mol/s for both MEMS/NEMS and cryogenic technology applications. The MEMS/NEMS are described as either two Gauges (instrument), or quartz fluctuating forks, even if the liquid or gas flows through an element, as well as cryogenic technology consisting of arrays of […]
Zinc oxide nanoparticles have been synthesized by chemical reaction method. Polyvinyl alcohol (PVA) composite film filled with nanometric, monodispersed zinc oxide nano particles prepared by PVA solution and nanozinc oxide. Polymer blend with ZnO nanoparticle composite film has prepared by casting technique. The property of nano composites depends greatly on the chemistry of polymer matrices. […]
Fire-retarding properties of wollastonite nanofibers in poplar wood (Populus nigra) were studied here. Some physical properties such as water absorption, volumetric swelling and anti-swelling efficiency (ASE) were also measured. Specimens were prepared according to the ISO 11925 specifications for the fire-retarding properties and according to the ASTM D4446 -2002 specifications for the physical properties. Impregnation […]
This paper discusses about preparation of biodegradable polymer /clay nanocomposites based on organically modified montmorillonite clay; i.e. cloisite 10A and biodegradable polymer chitosan by solution mixing technique and their characterization. The nanocomposites were successfully prepared and their structures were characterized by powder x-ray diffraction (XRD), particle size analyzer (Beckman coulter), scanning electron microscopy (SEM), and […]
Nanotechnology has been advanced since the last decades. Among all nanomaterials that have been developed, nanosilver is the most frequently used nanoparticles. Its release into natural water bodies is inevitable due to its broad applications. Nanosilver (nAg) was prepared via Tollens method using. The morphology, size distribution and average size of the obtained nAg was […]
In this study, for increasing absorption of the active layer in bulk hetero junction (BHJ) organic solar cells (OSCs) we used surface Plasmon effects of metal nano particles (MNPs). We embedded the MNPs inside the active layer and studied the device structure. For shown the results we investigated the model of our structure with Finite […]
