skip to main content
Menu
IJND-1

International Journal of Nano Dimension (Int. J. Nano Dimens.)

Editor-in-Chief: Dr. Khalil Pourshamsian; Director-in-Charge: Dr. Babak Sadeghi

Online ISSN: 2228-5059

Print ISSN: 2008-8868

Publishes Quarterly

Original Article
Synthesis of ZrO2 nanoparticle by combination of sol-gel auto-combustion method- irradiation technique, and preparation of Al-ZrO2 metal matrix composites

Nanocrystalline ZrO2 with particle size of about 38 nm was directly synthesized by sol-gel auto-combustion method. The overall process involved three steps: formation of homogeneous sol at 50-55°C; formation of dried gel at 110°C, and combustion of the dried gel at 400°C. Experiments revealed that ZrO2 dried gel derived from glycine (Fuel) and nitrate sol […]

Original Article
Production and microstructural investigation of Al-nano TiB2 composite produced by powder metallurgy technique

Automotive and aerospace industries are required to light materials which have high properties. This causes to reduce production cost and fuel consumption. One of these advanced materials that have been attracted at these decades is particulate metal matrix nanocomposites. These materials have a combination of ductile matrix alloy properties and ceramic reinforcement nanoparticles. Powder metallurgy […]