10.57647/ijrowa-n3ya-7856

Crosslinker effect on composite synthesis of alginate with activated carbon and nanocellulose as micronutrient slow-release fertilizer

  1. Chemistry Department, Faculty of Mathematics and Natural Science, Universitas Negeri Medan, Medan, Indonesia
  2. Biology Department, Faculty of Mathematics and Natural Science, State University of Medan, Medan, North Sumatera, Indonesia
  3. Research Center for Biomass and Bioproduct, Nasional research and innovation agency, Indonesia
Crosslinker effect on composite synthesis of alginate with activated carbon and nanocellulose as micronutrient slow-release fertilizer

Received: 2024-04-23

Revised: 2024-10-09

Accepted: 2024-12-28

Published in Issue 2025-06-01

How to Cite

Muchtar , Z., Rahmah, S., Zubir, M., Faradilla, P., Selly, R., Pulungan, A. S., Efiyanti, L., Cahyati, R., & Syahirah, A. N. (2025). Crosslinker effect on composite synthesis of alginate with activated carbon and nanocellulose as micronutrient slow-release fertilizer. International Journal of Recycling of Organic Waste in Agriculture, 14(3). https://doi.org/10.57647/ijrowa-n3ya-7856

PDF views: 224

Abstract

Purpose: Oil Palm Empty Fruit Bunches (OPEFB) solid waste has potential as a feedstock to be transformed into nanocellulose and activated carbon. In this study, we observed the effect of various compositions of activated carbon, alginate, and nanocellulose on the production of micronutrient slow-release fertilizer composites.

Method: The composite of activated carbon/alginate/nanocellulose (C/Alg/NC) with various compositions of 1:1:1; 3:1:1; 1:3:1 and 1:1:3 was synthesized and characterized by using FTIR, XRD, and SEM-EDX analysis. Crosslinked effects by Cu and Fe were observed, and composite C/Alg/NC showed slower release of Cu ions, which indicates a good strategy to produce micronutrient slow-release fertilizer.

Results: The best composite as a slow-release fertilizer for Cu metal is a 3:1:1 ratio. Over two days, it released 0.05 mg/g, and on the third day, it released an increase up to 0.27 mg/g after five days. Meanwhile, the Fe crosslinker composite with the same composition ratio (1:1:1) performed best as a slow-release fertilizer because Fe released slowly at only around 0.05 mg/g for up to three days. Then, for the next three days, until the 6th day, Fe was released slightly more, up to 0.3 mg/g, and then remained constant until the 9th day.

Conclusion: The synthesis of composites from a combination of carbon, alginate, and nanocellulose has become a good strategy for producing slow-release fertilizer. It has also become a solution for utilizing OPEFB solid waste, while this slow-release fertilizer can be used as a source of plant nutrition in oil palm plantations.

Research Highlights

  • Activated carbon and nanocellulose synthesis from sild waste Oil Palm Empty Fruit Bunches (OPEFB)
  • Composite synthesis with various composition of alginate-activated carbon-nanocellulose
  • Crosslinker effect of Cu and Fe metal on composite synthesis
  • Observed release of Cu and Fe as micronutrient slow-release fertilizer

Keywords

  • Compost,
  • Cross Linker Synthesis,
  • Oil Palm Empty Fruit Bunches,
  • Plant Nutrition

References

  1. Ardiles CS, Rodr´guez CC (2021) Theoretical study for determining the type of interactions between a GG block of an alginate chain with metals Cu2+, Mn2+, Ca2+ and Mg2+. Arab J Chem 14:1-18. https://doi.org/10.1016/j.arabjc.2021.103325
  2. Chai WS, Cheun JY, Kumar PS, Mubashir M, Majeed Z, Banat, F., et al. (2021) Review on conventional and novel materials towards heavy metal adsorption in wastewater treatment application. J Clean Prod 296:126589. http://dx.doi.org/10.1016/j.jclepro.2021.126589
  3. Djangkung SMS, Arfiana, Ilhamsyah N, Hadi S, Erlan R, Hens S, et al. (2020) Development of carbon based NPK slow release fertilizer using biochar from oil palm empty fruits bunch. Indones J Energy 3(1):19–24. https://doi.org/10.33116/ije.v3i1.45
  4. Evelyna A, Astifanni TK, Ruth I, Asri L, Purwasasmita BS (2019) Preparation of nanocellulose-alginate nanocomposites for chlorhexidine digluconate drug carrier. IOP Conf. Series: Mater Sci Eng 547: 012046. https://doi.org/10.1088/1757-899X/547/1/012046
  5. Gao X, Guo C, Hao J, Zhao Z, Long H, Li M (2020) Adsorption of heavy metal ions by sodium alginate-based adsorbent-a review and new perspectives. Int J Biol Macromol 164:4423–4434. https://doi.org/10.1016/j.ijbiomac.2020.09.046
  6. Han J, Guenier AS, Salmieri S, Lacroix M (2008) Alginate and chitosan functionalization for micronutrient encapsulation. J Agric Food Chem 56 (7):2528–2535. https://doi.org/10.1021/jf703739k
  7. Harahap M, Aulia F, Gea S (2014) The isolation of nanocrystalline cellulose from palm empty fruit bunches. The First International Seminar on Trends in Science and Science Education. http://dx.doi.org/10.1051/matecconf/20166004009
  8. Hasanudin U, Sugiharto R, Haryanto A, Setiadi T, Fujie K (2015) Palm oil mill effluent treatment and utilization to ensure the sustainability of palm oil industries. Water Sci Technol 72(7):1089–1095. https://doi.org/10.2166/wst.2015.311
  9. Kassem I, Ablouh EH, El Bouchtaoui FZ, Hannache H, Ghalfi H, Sehaqui H, et al. (2022) Cellulose nanofibers/engineered biochar hybrid materials as biodegradable coating for slow release phosphate fertilizers. ACS Sustain Chem Eng 10(46):15250–15262. https://doi.org/10.1021/ACSSUSCHEMENG.2C04953
  10. Kassem I, Ablouh EH, El Bouchtaoui FZ, Kassab Z, Hannache H, Sehaqui H, et al. (2022) Biodegradable all-cellulose composite hydrogel as eco-friendly and efficient coating material for slow-release MAP fertilizer. Prog Org Coat 162:106575. https://doi.org/10.1016/J.PORGCOAT.2021.106575
  11. Klinkajon W, Supaphol P (2014) Novel copper (II) alginate hydrogels and their potential for use as anti-bacterial wound dressings. Biomed Mater Res 9 (4):045008. https://doi.org/10.1088/1748-6041/9/4/045008
  12. Lani NS, Ngadi N, Johari A, Jusoh M (2014) Isolation, characterization, and application of nanocellulose from oil palm empty fruit bunch fiber as nanocomposites. J Nanomater 2014:1–9. https://doi.org/10.1155/2014/702538
  13. Leppiniemi J, Lahtinen P, Paajanen A, Mahlberg R, Metsa-Kortelainen S, Pinomaa T, et al. (2017) 3D-Printable bioactivated nanocellulose−alginate hydrogels, V. P. H. ACS Appl Mater Interfaces 9(26): 21959−21970. https://doi.org/10.1021/acsami.7b02756
  14. Lubis RAF, Nasution HI, Zubir M (2020) Production of activated carbon from natural sources for water purification. Indones J Chem Sci Technol 3(2):67-73. https://doi.org/10.24114/ijcst.v3i2.19531
  15. Massana Roquero D, Othman A, Melman A, Katz E (2022) Iron (III)-cross-linked alginate hydrogels: A critical review. Mater Adv 3(4):1849–1873. https://doi.org/10.1039/D1MA00959A
  16. Muchtar Z, Pulungan AS, Rahmah S, Zubir M, Faradilla P, Novita Sari M, et al. (2023) Synthesis and characterization of derived oil palm empty fruit bunches activated carbon with alginate and Fe. In The 9th Annual International Seminar on Trends in Science and Science Education (AISTSSE) 2022. Sciendo:188–194. https://doi.org/10.2478/9788367405195-028
  17. Prastiwi DA, Sumawinata I, Pari G (2019) The utilization of activated carbon as micronutrients carrier in slow release fertilizer formulation. IOP Conf Ser Earth Environ Sci 359(1):012009. https://doi.org/10.1088/1755-1315/359/1/012009
  18. Priyadi P, Mangiring W (2019) Characteristics of corn cobs waste activated carbon for slow release micro fertilizer carrier. SAINS TANAH - J Soil Sci Agroclimatol 16(2):147-158. https://doi.org/10.20961/stjssa.v16i2.25480
  19. Rana AK, Gupta VK, Hart P, Kumar V (2024) Thakur cellulose-alginate hydrogels and their nanocomposites for water remediation and biomedical applications. Environ Res 243:1-25. https://doi.org/10.1016/j.envres.2023.117889
  20. Rui Rodrigues J, Lagoa R (2006) Copper ions binding in Cu‐alginate gelation. J Carbohydr Chem 25(2–3):219–232. https://doi.org/10.1080/07328300600732956
  21. Sari SA, Selly R, Rahmah S, Nasution HI, Zubir M, Banjarnahor LR, Efendi YD (2021) Synthesis and characterization of activated carbon from oil palm empty bunches. J Phys Conf Ser 1819(1). https://doi.org/10.1088/1742-6596/1819/1/012021
  22. Septevani AA, Rifathin A, Sari AA, Sampora Y, Ariani GN, Sudiyarmanto, Sondari D (2020) Oil palm empty fruit bunch-based nanocellulose as a super-adsorbent for water remediation. Carbohydr. Polym 229:115433. https://doi.org/10.1016/j.carbpol.2019.115433
  23. Siqueira P, Siqueira É, de Lima AE, Siqueira G, Pinzón-Garcia AD, Lopes AP, Segura MEC, Isaac A, Pereira FV, Botaro VR (2019) Three-dimensional stable alginate-nanocellulose gels for biomedical applications: Towards tunable mechanical properties and cell growing. Nanomater 9(78):1–22. https://doi.org/10.3390/nano9010078
  24. Sutirman ZA, Sanagi MM, Wan Aini WI (2021) Alginate-based adsorbents for removal of metal ions and radionuclides from aqueous solutions: A review. Int J Biol Macromol 174:216–228. https://doi.org/10.1016/j.ijbiomac.2021.01.150
  25. Thoe J, Surugau N, Chong H (2019) Application of oil palm empty fruit bunch as adsorbent: A review. Trans Sci Technol 6(1):9-26.
  26. White PJ, Brown PH (2010) Plant nutrition for sustainable development and global health. Ann Bot 105(7): 1073–1080. https://doi.org/10.1093/aob/mcq085
  27. Wu M, Zhang Y, Feng X, Yan F, Li Q, Cui Q, Li B (2023) Fabrication of cationic cellulose nanofibrils/sodium alginate beads for Congo red removal. iScience 26(10):107783. https://doi.org/10.1016/j.isci.2023.107783
  28. Xie S, Wen Z, Zhan H, Jin M (2018) An experimental study on the adsorption and desorption of Cu (II) in Silty Clay. Hindawi Geofluids 2018:1-12. https://doi.org/10.1155/2018/3610921
  29. Zubir M, Muchtar Z, Syahputra RA, Sudarma TF, Nasution HI, Fadhilah L, et al. (2021) Characterization of modified Fe-Cu nanoparticle activated carbon derived of palm oil empty bunches. J Phys Conf Ser 1819(1). https://doi.org/10.1088/1742-6596/1819/1/012020