Switching Pattern for Transformer Cascaded Inverter in Dynamic Voltage Restorer Structure

PDF
  • Shirin Soltani1,
  • Majid Dehghani*2,
  • Majid Moazzami3,
  1. Department of Electrical Engineering, Dehagh Branch, Islamic Azad University, Dehagh, Isfahan, Iran
  2. Smart Microgrid Research Center, Najafabad Branch, Islamic Azad University, Najafabad, Iran
  3. Department of Electrical Engineering, Najafabad Branch, Islamic Azad University, Naein, Iran

Revised: 2020-11-28

Accepted: 2021-03-31

Published in Issue 2021-09-01

How to Cite

Soltani, S., Dehghani, M., & Moazzami, M. (2021). Switching Pattern for Transformer Cascaded Inverter in Dynamic Voltage Restorer Structure. Signal Processing and Renewable Energy (SPRE), 5(3), 51-65. http://oiccpress.com/spre/article/view/7849

PDF views: 183

Abstract

Sensitive loads cannot tolerate voltage sags and swells in power distribution networks and lots of problems are engendered for them. Therefore, dif f e rent instruments are pla nn ed to compensate volt a ge swells and sags. Between them dynamic voltage restorer (DVR) has found special import a n c e, because it operates better than others for this purpose and restores voltage to its initial value conveniently. A DVR is a power-electronic controller that can protect sensitive loads from disturbances in the supply system. The DVR is installed in series to the network. In this paper 9 level cascaded inverters with cas ca d ed transfor m e r s are used in DVR internal circuit, but the difference in magnetic flux in cascading transformers has adverse effects on the plan. Therefore, a new switching pattern is used
PDF