skip to main content
Menu
ijc-19.01.2024-3

Iranian Journal of Catalysis (IJC)

Editor-in-Chief: Prof. Ahmad Reza Massah

Online ISSN: 2345-4865

Print ISSN: 2252-0236

Publishes Quarterly


Volume 7 (2017)

Issue 1, March 2017

Original Article
Fe-MCM-22 catalyzed multicomponent synthesis of dihydropyrano [2,3-c] pyrazole derivatives

The Fe-MCM-22 zeolite was found to be an efficient solid heterogeneous catalyst for synthesis of dihydropyrano [2,3-c] pyrazoles via one pot four component reaction of ethyl acetoacetate, hydrazine hydrate, aromatic aldehyde and malononitrile in aqueous alcohol. The catalyst was synthesized by hydrothermal method under autogenous pressure and modified by Fe (III) ion exchange. The prepared […]

Original Article
Alkanedisulfamic acid functionalized silica-coated magnetic nanoparticles as a reusable efficient nanocatalyst for synthesis of gem-dihydroperoxides and 1,2,4,5-tetraoxanes

Alkanedisulfamic acid functionalized silica-coated magnetic nanoparticles (ADSA-MNPs) were used as effective, low-cost and reusable solid heterogeneous nanomagnetic catalysts for conversion of aldehydes and ketones to corresponding gem-dihydroperoxides and 1,2,4,5-tetraoxanes using aqueous hydrogen peroxide (30% w/w in H2O) at room temperature. These compounds are important key intermediates in preparation of anti-malaria drugs. The reactions proceeded in […]

Original Article
Introduction of Brönsted acidic ionic liquid supported on nanoporous Na+-montmorillonite as an efficient catalyst for the synthesis of 2-amino-tetrahydro-4H-pyrans

Nanoporous sodium montmorillonite clay (Na+-MMT) was used as a support for the immobilization of 1-methyl-3-(trimethoxysilylpropyl)-imidazolium hydrogen sulfate (Na+-MMT-[pmim]HSO4). This catalyst showed excellent catalytic activity for the preparation of 2-amino-3-cyano-5-oxo-5,6,7,8-tetrahydro-4H-benzopyrans via three-component reactions between aldehydes, dimedone and malononitrile. The procedure gave the products in high yields within short reaction times. Also, this catalyst can be reused […]

Original Article
Synthesis of pyrazolopyranopyrimidines catalyzed by caffeine supported on boehmite nanoparticles and their evaluation for anti-bacterial activities

The reaction of 3-chloropropyl boehmite nanoparticles with caffeine and sulfuric acid afforded BNPs-3-propyl-imidazolopyridinium hydrogen sulfate [BNPs-Caff]HSO4 as a new BNPs-supported ionic liquid (IL) catalyst. [BNPs-Caff]HSO4 proved to be an efficient heterogeneous catalyst for the synthesis of pyrazolopyranopyrimidines via a one-pot four-component reaction of hydrazine hydrate, ethyl acetoacetate, barbituric acid, and an aldehyde. The attractive features […]

Original Article
Photocatalytic degradation of rhodamine B by nano bismuth oxide: Process modeling by response surface methodology (RSM)

The photocatalytic activity of nano-Bi2O3 was evaluated in degradation of rhodamine B (RhB) as a model of dye pollutant from waste waters. Nano sized Bi2O3 was synthesized using the chemical precipitation method. The as-prepared sample was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and Fourier transform infrared spectrometry (FT-IR). Structural analysis revealed that […]

Original Article
Environmentally benign synthesis of 14-Phenyl-8H-Dibenzo[a,i]xanthene-8,13(14H)-Diones using CuI nanoparticles as an efficient catalyst

In this study, CuI nanoparticles as an efficient catalyst was used for the synthesis of 14-phenyl-8H-dibenzo[a,i]xanthene-8,13(14H)-diones using aldehydes, 2-naphthol and 2-hydroxynaphthalene-1,4-dione in aqueous media. In this study, it was found that water was the most effective solvent compared to others. Among several catalysts that were tested for this multi-component synthesis, CuI nanoparticles were the best […]

Original Article
Promoting effects of calcium on the performance of Cu-MgO catalyst in hydrogenation of furfuraldehyde

In the present study, the effects of calcium doping on the performance of the co-precipitated Cu-MgO catalysts prepared with different calcium loadings in the selective hydrogenation of furfuraldehyde were investigated. The results proved that the addition of this promoter had a remarkable impact on the catalytic performance. The conversion of furfuraldehyde enhanced up to 83% […]

Original Article
One-pot synthesis of tetrahydropyrimido[4,5-b]quinoline derivatives using sulfonic acid functionalized SBA-15 and their antimicrobial activities

A Simple and efficient method for synthesis of tetrahydropyrimido[4,5-b]quinoline derivatives via three component reaction of aromatic aldehydes, dimedone and 6-amino uracil derivatives using a catalytic amount of sulfonic acid functionalized nanoporous silica (SBA-15-Pr-SO3H) is described. The advantages of this method are easy and clean work-up, high yield, mild reaction condition, reusable catalyst and environmentally benign […]

Original Article
Photo corrosion of titania nanotubes within water splitting reaction

Titania nanotubes (TNT) prepared by anodization of Ti foils were used for water splitting in a standalone cell. The concentration polarization between the anode side (1M NaOH) and cathode side (0.5 M H2SO4) ensured that the water splitting reaction could take place with no external bias and separate H2 and O2 evolution could be achieved. […]

Original Article
Co3O4 nanoparticles as a robust and recoverable catalyst for one-pot synthesis of polyhydroquinolines and tetrahydrobenzopyrans

This study introduces a green and efficient method for preparation of biologically-active substituted 4H-pyrans using the one-pot three-component reaction of aromatic aldehydes, dimedone and malononitrile in the presence of cobalt oxide nanoparticles. Co3O4 nanoparticles were used as an efficient catalyst for the synthesis of polyhydroquinoline derivatives by the reaction of aromatic aldehydes, ethyl acetoacetate, dimedone […]

Spotlights
Spotlight: Catalytic anomeric based oxidation

Meysam Yarie was born in 1987 in Malayer/ Hamedan, Iran. He received his B.Sc. in Applied Chemistry (2010) from Malek-Ashtar University of Technology and M.Sc. in Organic Chemistry (2012) from Kurdistan University under the supervision of Dr. Kamal Amani. He is currently working towards his Ph.D. under the supervision of Professor Mohammad Ali Zolfigol. His […]

XML