Nanofluids are gaining much importance over the past decade due to their enhanced thermal conductivity, specific heat, cooling capacity, electrical conductivities. Novel properties of nanofluids are yet to be explored to the highest potential applications. One of the prominent applications of nanofluids is in thermal conduction. The presence of nanoparticle in a fluid can enhance […]
Mirage effect is contactless and non destructive method which has been used a lot to determine thermal properties of different kind of samples , transverse photothermal deflection PTD in skimming configuration with ccd camera and special programs is used to determine thermal conductivity of porous silicon ps film. Ps samples were prepared by electrochemical etching. […]
Statistical methods, and especially machine learning, have been increasingly used in nanofluid modeling. This paper presents some of the interesting and applicable methods for thermal conductivity prediction and compares them with each other according to results and errors that are defined. The thermal conductivity of nanofluids increases with the volume fraction and temperature. Machine learning […]
This study was designed to experimentally measure the thermal and electrical conductivities of Aluminium Nitride/Ethylene Glycol (AlN/EG) nanofluids. Transmission electron microscopy (TEM) was used to characterize the shape of AlN nanoparticles. Nanofluids with different particle volume concentrations of 0.5%, 1%, 2%, 3%, 4%, and 5% were utilized. The thermal and electrical conductivities of the nanofluids […]
Liquid desiccants such as glycols are used in dehydration process, among which Triethylene Glycol (TEG) is considered as a common choice. The addition of nanoparticles to TEG as the base fluid is one of the prevalent method to improve thermal properties of TEG. In this study, an experimental investigation was performed on thermal conductivity of […]
The purpose of this study is to use the thermal and electrical conductivities of copper oxide nanoparticles and carbon nanotubes for the preparation of high-performance nanofluids for achieving better heat transfer properties. These nanofluids consist of a water/Ethylene Glycol solution containing single-wall carbon nanotubes (SWCNTs) and copper oxide nanoparticles (CuONPs). The effects of such independent […]
A series of Graphene Oxide/ Polyacrylamide (GO/PAM) super-elastic nanocomposites with different amounts of Graphene Oxide Nanosheets (GONSs) (0.5, 1, 1.5, and 2 wt. %) were synthesized using an in-situ polymerization in an aqueous medium in this paper. To this end, we proposed a method for obtaining super-elastic nanocomposites with a high dispersion of GONSs in […]
The electrical and thermal properties of polymer composites are enhanced by the incorporation of nano and micron fillers. Reported work on polymer composites with the combination of micro and nano sized fillers like silicon dioxide, alumina, silicon carbide, molybdenum disulphide, and graphite are limited. In this investigation, the AC conductivity of composites with the combination […]