The aim of this study was to investigate the sol gel synthesis of HA/FA nanoparticles and the possible formation of TCP phase or unstoichiometric calcium deficient hydroxyapatite (CDHA) from the precursors with a Ca/P ratio of 1.62. In order to prepare the sol, the solutions of Triethyl phosphite, ammonium fluoride and calcium nitrate in ethanol […]
Nanocrystalline ZrO2 with particle size of about 38 nm was directly synthesized by sol-gel auto-combustion method. The overall process involved three steps: formation of homogeneous sol at 50-55°C; formation of dried gel at 110°C, and combustion of the dried gel at 400°C. Experiments revealed that ZrO2 dried gel derived from glycine (Fuel) and nitrate sol […]
In recent years, using Sol-gel procedure for the purpose of laboratory and industrial synthesis of Nano-structures, and especially silica Nano-particles, has been significantly increased. In this research, silica particles were synthesized by Sol-gel procedure and their physical and chemical properties were studied by means of scanning electron microscopy (SEM), transmission electron microscopy (TEM) and thermo […]
In this work, sol-gel processing was used to synthesize the fluorohydroxyapatite (nano-FHA, Ca10(PO4)6(OH)2−xFx) nanopowders. The advantages of the sol-gel method over other methods are precise control of composition, low processing temperature, and better homogeneity. Calcium nitrate tetrahydrate, phosphorous pentoxide and Tetrabuthylammonium fluoride were used, respectively, as P, Ca, and F precursors with a Ca:P ratio […]
Nanostructured alumina thin films were coated on stainless steel by Sol-Gel dip coating method. In order to prevent crack formation, Al2O3 films were kept in a solvent bath immediately after coating to reduce the rate of drying. Effects of calcination temperature and withdrawal speed on structural properties were analyzed using XRD and SEM. Topography and […]
ZnO thin film of 80 nm thickness was deposited by the sol-gel spin coating method on SiO2/Si substrate and subsequently post-annealed at 500°C with a flow of oxygen for 60 min. Crystallographic structure of the sample was characterized by X-ray diffraction (XRD) method while a field emission scanning electron microscope (FESEM) was used to investigate […]
Hydrophobic silica titanium nanoparticles (STNPs) were successfully synthesized by the sol-gel process using liquid modification. Fourier transform infrared (FTIR) and X-ray fluorescence (XRF) studies were demonstrated the attachment of titanium on the silica surface. Titanium content enhanced the agglomeration of particles as shown in topography results. The N2 adsorption-desorption followed Type (V) isotherm indicating the […]
In this study, different samples of Niobium and Vanadium co-doped titania thin films (5-10-15 mol% Nb and 5-10-15 mol% V) were prepared via sol−gel dip coating method, using niobium chloride as niobium precursor, ammonium metavanadate as vanadium precursor, and titanium (IV) butoxide (TBT) as titanium precursor. The effects of doping amount on the structural, optical, […]
Y2Ce2O7 nano powders were synthesized via sol-gel reactions at 900 (S1), 1000 (S2) and 1100 (S3) ˚C for 4 h using yttrium acetate (C6H9O6Y.xH2O), ammonium cerium nitrate ((NH4)2Ce(NO3)6) and stearic acid (C18H36O2) as raw materials at stoichiometric 1:1 Y:Ce molar ratio. The synthesized materials were characterized by powder X-ray diffraction (PXRD) technique and Fourier transforms […]
Bioactive glass is an appropriate substance for the transporting a pharmaceutical compound owing to its special effects (containing great antibacterial, semiconducting, nanoporous, adherent, and strong bonding with the bone tissue). Hence, in recent years, many investigations have been done in this topic. However, several constraints alike fast drug release and slow drug loading ability are […]