In this paper, the electrochemical hydrogen storage in nanocomposite materials was studied. Multi-Walled Carbon Nanotubes (MWCNTs) electrode was prepared by mixing with special composite. The optimum ratio of MWCNTs was estimated 30-70% (w/w) in the composite material. MWCNTs were synthesized by Chemical vapor deposition (CVD). The nanocomposite was homogenized by microwave. Cyclic voltammetry (CV) was […]
Ion channels are naturally occurring pores through the proteins that regulate the passage of ions and thus maintain the concentration of ions inside and outside the cell. The ion channels control many physiological functions and they can show selectivity for a specific ion. Ion channels are mostly observed in nerve cells and muscle cells. The […]
In this paper, we report on the synthesis of Cu nanoparticles through a single-precursor route by controlling the growth temperature. Selective adsorption of oleylamine on various crystal planes may play an important role in the growth process. The understanding of this self-assembling process will help us develop reliable and reproducible methods to synthesis other three […]
A novel zinc oxide – agar nanocomposite was successfully synthesized using zinc chloride as a precursor. The nanocomposite was prepared using a domestic microwave oven. The prepared nanocomposites have been characterized by Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM) and UV- visible spectroscopy. The crystalline properties of the synthesized […]
In the present study, natural convective heat transfer in a partitioned square cavity utilizing nanofluids is studied. The vertical left and right walls are considered as the hot and cold walls, respectively and the partitions assumed to be adiabatic. The nanofluid used in this study is Al2O3 with the volume fraction of 20%. It is […]
The aim of the present study was to prepare nano-sized calcium fluoride (CaF2). Calcium fluoride nanoparticles were synthesized by CaCl2.6H2O and ammonium fluoride. Nanoparticles were synthesized by co-precipitation method. The synthesized nanocrystals were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM). The crystallite size estimated using Scherer’s formula was […]
The study reports some preliminary investigations on the template free synthesis of a scantly investigated polyaniline (PANI) derivative-Phenylenediamine (PDA) by template free method in the presence of Oxalic acid (OA) (dopant), using Ammonium Persulfate as oxidant. Polymerization of Phenylenediamine (PDA) was confirmed by the FT-IR as well as UV–visible studies. The morphology of Phenylenediamine doped […]
Calcium doped nickel ferrite powders have been prepared by sol-gel combustion technique. Metal nitrates, such as calcium nitrate, nickel nitrate and ferric nitrate, were used as the source materials and citric acid and polyvinyl alcohol were used as the burning agent and agglomeration reducing agent, respectively. The average crystallite size of the prepared ferrite was […]
Nanocrystalline ZrO2 with particle size of about 38 nm was directly synthesized by sol-gel auto-combustion method. The overall process involved three steps: formation of homogeneous sol at 50-55°C; formation of dried gel at 110°C, and combustion of the dried gel at 400°C. Experiments revealed that ZrO2 dried gel derived from glycine (Fuel) and nitrate sol […]
This paper discusses different important gas permeation models such as “Maxwell”, “Bruggeman”, “Lewis-Neilson”, and “Pal” models to predict “Mixed Matrix Membranes” (MMMs) performance. The main parameter considered and discussed is the permeability of Hydrogen on Carbon Nanotubes (CNTs)-MMM. For evaluation of the theoretical models, experimental data of permeability for H2 were compared to the theoretical […]
