Plant mediated synthesis of silver nanoparticles (AgNPs) is considered as a representative approach in material synthesis for environmental benignity. In this paper, we report an eco-friendly (green) protocol for the preparation of AgNPs using fruit extract of Michelia champaca L. The color change in experimental solution from light brown to dark brown indicates the resonance […]
In this paper, the performance of a CNT-JLTFET under different values of torsional strains of 0, 3, and 5 degrees has been investigated. Simulation has been carried out using non-equilibrium Green’s function (NEGF) formalism in the mode-space approach and in the ballistic limit. The simulation results indicate that, under torsional strain, an increase occurs in […]
In this study, we reported a facile synthesis of bimetallic FeCo nanoparticles (Fe-Co NPs) by FeSO4.7H2O and Co(Ac)2.4H2O in the presence of sodium borohydride and 2-thiotic acid. The structure and morphology of the nanoparticles were characterized by X-Ray Diffraction (XRD), Energy-dispersive X-ray spectroscopy (EDS), and Transmission Electron Microscopy (TEM). These small, spherical shape and pure […]
In this paper, a thin-film InP-based solar cell designed and simulated. The proposed InP solar cell has a periodic array of plasmonic back-reflector, which consists of a silver layer and two silver nanowires. The indium tin oxide (ITO) layer also utilized as an anti-reflection coating (ARC) layer on top. The design creates a light-trapping structure […]
The purpose of this study is to use the thermal and electrical conductivities of copper oxide nanoparticles and carbon nanotubes for the preparation of high-performance nanofluids for achieving better heat transfer properties. These nanofluids consist of a water/Ethylene Glycol solution containing single-wall carbon nanotubes (SWCNTs) and copper oxide nanoparticles (CuONPs). The effects of such independent […]
In this research we are synthesized CuO nanoparticles (NPs) using water extract of. Also the total phenolic content of Sambucusnigra L. leaves water extract was measured by the Folin-Ciocalteu method. For confirmation the structure of synthesized bio-CuO-NPs we are employed X-ray Diffraction (XRD), Ultraviolet-visible (UV–vis), Fourier Transform Infrared (FTIR) spectroscopies, Scanning Electron Microscopy (SEM), and […]
By applying tensile local uniaxial strain on 5 nm of drain region and compressive local uniaxial strain on 2.5 nm of source and 2.5 nm of channel regions of graphene nanoribbon tunneling field-effect transistor (GNR-TFET), we propose a new bandgap-engineered (BE) GNR-TFET. Simulation of the suggested device is done based on non-equilibrium Green’s function (NEGF) […]
Nanostructured Ni1-xLnxSb2O6 (Ln = Eu, Gd, Ho and Yb) powders were synthesized via stoichiometric 1:2 Ni:Sb molar ratio by solid state reaction at 800 ºC for 8 h using Ni(NO3)2, Sb2O3, Eu2O3, Gd2O3 and Ho2O3 raw materials. The synthesized materials were characterized by X-ray diffraction (XRD) technique. Structural analyses were done by FullProf program employing […]
In this study a sensitive electrochemical sensor for the detection of E.coli has been developed using silver nanoparticle (Ag) embedded poly(9,9-dioctylfluorene-ran-phenylene) (CFP) nanocomposite as a conductive platform and DNA hybridization technique. The new polymer was synthesized from 9,9-dioctylfluorene and 1,3-dichlorobenzene and biphenyl through Friedel Crafts alkylation reaction and the synthesized polymer as well as the […]
In this research, Zn2SnO4 nanorods were prepared and structural properties of the nanorods were characterized, developing of wide-range of the optical behavior of Zn2SnO4 nanorods and the antibacterial activity was also investigated using a microwave-assisted method. A zinc stannate (Zn2SnO4) nanorod was synthesized via facile microwave-assisted method using ammonia with cubic spinel structure. The crystallography […]
