Plant mediated synthesis of silver nanoparticles (AgNPs) is considered as a representative approach in material synthesis for environmental benignity. In this paper, we report an eco-friendly (green) protocol for the preparation of AgNPs using fruit extract of Michelia champaca L. The color change in experimental solution from light brown to dark brown indicates the resonance […]
In this paper, the performance of a CNT-JLTFET under different values of torsional strains of 0, 3, and 5 degrees has been investigated. Simulation has been carried out using non-equilibrium Green’s function (NEGF) formalism in the mode-space approach and in the ballistic limit. The simulation results indicate that, under torsional strain, an increase occurs in […]
In this study, we reported a facile synthesis of bimetallic FeCo nanoparticles (Fe-Co NPs) by FeSO4.7H2O and Co(Ac)2.4H2O in the presence of sodium borohydride and 2-thiotic acid. The structure and morphology of the nanoparticles were characterized by X-Ray Diffraction (XRD), Energy-dispersive X-ray spectroscopy (EDS), and Transmission Electron Microscopy (TEM). These small, spherical shape and pure […]
In this paper, a thin-film InP-based solar cell designed and simulated. The proposed InP solar cell has a periodic array of plasmonic back-reflector, which consists of a silver layer and two silver nanowires. The indium tin oxide (ITO) layer also utilized as an anti-reflection coating (ARC) layer on top. The design creates a light-trapping structure […]
The purpose of this study is to use the thermal and electrical conductivities of copper oxide nanoparticles and carbon nanotubes for the preparation of high-performance nanofluids for achieving better heat transfer properties. These nanofluids consist of a water/Ethylene Glycol solution containing single-wall carbon nanotubes (SWCNTs) and copper oxide nanoparticles (CuONPs). The effects of such independent […]
In this research we are synthesized CuO nanoparticles (NPs) using water extract of. Also the total phenolic content of Sambucusnigra L. leaves water extract was measured by the Folin-Ciocalteu method. For confirmation the structure of synthesized bio-CuO-NPs we are employed X-ray Diffraction (XRD), Ultraviolet-visible (UV–vis), Fourier Transform Infrared (FTIR) spectroscopies, Scanning Electron Microscopy (SEM), and […]
By applying tensile local uniaxial strain on 5 nm of drain region and compressive local uniaxial strain on 2.5 nm of source and 2.5 nm of channel regions of graphene nanoribbon tunneling field-effect transistor (GNR-TFET), we propose a new bandgap-engineered (BE) GNR-TFET. Simulation of the suggested device is done based on non-equilibrium Green’s function (NEGF) […]
Nanostructured Ni1-xLnxSb2O6 (Ln = Eu, Gd, Ho and Yb) powders were synthesized via stoichiometric 1:2 Ni:Sb molar ratio by solid state reaction at 800 ºC for 8 h using Ni(NO3)2, Sb2O3, Eu2O3, Gd2O3 and Ho2O3 raw materials. The synthesized materials were characterized by X-ray diffraction (XRD) technique. Structural analyses were done by FullProf program employing […]
In this study a sensitive electrochemical sensor for the detection of E.coli has been developed using silver nanoparticle (Ag) embedded poly(9,9-dioctylfluorene-ran-phenylene) (CFP) nanocomposite as a conductive platform and DNA hybridization technique. The new polymer was synthesized from 9,9-dioctylfluorene and 1,3-dichlorobenzene and biphenyl through Friedel Crafts alkylation reaction and the synthesized polymer as well as the […]
Particulate matter is defined as a mixture of airborne solid particles and liquid droplets that can be inhaled and may cause serious health problems. Such elements are currently measured utilizing air quality monitoring devices that provide information on PM 10 and PM 2.5 levels giving information on pollution levels. However, many difficulties are encountered in […]