In this paper, a novel catalyst (MgAl2O4@SiO2-PTA) was proposed for the green oxidation of aliphatic alcohols. The resultant composite was characterized by different techniques, such as X-ray diffraction (XRD), SEM, FT-IR, EDX and Brunauer-Emmett-Teller (BET) surface area analysis. The prepared nanocomposite was used as a catalyst for oxidation of aliphatic alcohols with hydrogen peroxide in […]
In this article a low power and low latency 4-2 compressor has been presented. By using modified truth table and Pass Transistor Logic (PTL) a novel structure has been proposed which outperforms previous designs from the frequency of operation view point. The proposed design method has reduced the total transistor count considerably which will lead […]
In this research, geometrical structures of armchair single walled boron nitride nanotube (SWBNNT) and armchair single walled aluminum nitride nanotube (SWAlNNT) were optimized by Density Functional Theory (DFT) in the gas phase, both having the same length of 5 angstrom and n=9, m=9. B3LYP/6-31G* level of theory have been used to determine and compare electronic […]
Spinel MgAl2O4 nanopowders were synthesized by one-step solid state reactions using Al(NO3)3.9H2O and MgSO4 raw materials at stoichiometric 1 : 2, Mg : Al molar ratio at a constant reaction temperature of 1000 ºC for 8 h (S1), 10 h (S2) and 24 h (S3). The synthesized materials were characterized by powder X-ray diffraction (PXRD) […]
The main objective of this paper was to manipulate the Nano Fibrous Scaffold “NFS” surface roughness to achieve a new transdermal drug release profile. To assess the intrinsic mechanical properties of Nylon 6 or polycaprolactam, such as its proper resiliency, it was considered as the matrix. Cetirizine was used as a drug model and was […]
The novel approach has been carried for the green synthesis of silver nanoparticles using leaf extract of Cinnamomum tamala and silver nitrate solution. The optimal condition for synthesizing Ag-NPs was obtained by varying the leaf extract concentration, temperature, AgNO3 concentration, effect of ratio of leaf extract to AgNO3 solution,pH and reaction time. The formation of […]
In the present investigation, ZnFe2O4@MnO and MnFe2O4@ZnO magnetic nanocomposites were fabricated via a facile hydrothermal method and were calcined at 300 °C for 3 h. Synthesis of ZnFe2O4@MnO and MnFe2O4@ZnO magnetic nanocomposites optimized by the different weight percentages. The synthesized photocatalyst was characterized by X-ray diffraction (XRD), Fourier transform infrared (FT-IR), Vibrating Sample Magnetometer (VSM), […]
Due to the non-polar nature of carbon nanotubes, their use in aqueous environments is limited. Therefore, auxiliary solvents such as dimethyl sulfoxide are used to study the interactions between the amyloid-β peptide and carbon nanotubes. In this work, the interaction of Aβ (1-42), the most effective peptide in the development of Alzheimer’s disease, with the […]
In this paper, a series of BaLaxGdxFe12-2xO19 (x=0.2, 0.4, 0.6 and 0.8)/PANI (polyaniline) nanocomposites synthesized for investigating the photocatalytic properties. Barium hexaferrite doped with La3+ and Gd3+ prepared via a sol-gel auto-combustion method and then the binary nanocomposites fabricated by the in situ polymerization method. (Fourier transform infrared) FTIR, (x-ray diffraction) XRD, (field emission electron […]
Un-doped and Cd-doped ZnZrO3/ZnO/ZrO2 nano composites (CDZZ-NCPs) (CD0-4) were synthesized by the hydrothermal method. The nano composites were characterized by various techniques such as Fourier Transform Infra-Red spectroscopy (FT-IR), X-ray Diffraction (XRD), Field Emission Scanning Electron Microscopy (FE-SEM) and Energy Dispersive X-Ray Analysis (EDS). The photocatalytic properties of CDZZ-NCPs (CD0-4) were studied by degradation of […]