CoTiO3-clay nano-composites were synthesized via a conventional sol-gel method; the gel was calcinated at 500 – 800°C for 2 hours. The presence of rhombohedra phase of CoTiO3 in clay matrix was confirmed by XRD, FTIR, SEM. Cobalt titanate-clay nano-composites were prepared with 5-20%(w/w) by sol-gel method. The spectra results were investigated at 20% (w/w) concentration […]
Nano structured materials have wide range of applications due to their interesting size-dependent chemical and physical properties compared to particles of size in the range of micrometer. Copper oxide nano materials are of interest on account of their potential uses in many technological fields. In this study CuO nanoparticles were synthesized via simple sol gel […]
ZnO thin films with preferred orientation along the (002) plane were prepared onto the glass substrates by the sol-gel spin coating method for different post- annealing temperatures. The XRD study confirms that the thin films grown by this method have good crystalline hexagonal wurtzite structure. The optical band gap of the samples was determined from […]
A useful nanophotocatalyst (La,S-TiO2) was prepared by a sol-gel method and characterized by UV–vis diffuse reflectance spectroscopy (DRS), X-ray diffraction (XRD), photoluminescence emission spectroscopy (PL) and scanning electron microscopy (FESEM). The results showed that the La,S-TiO2, which calcined at 550 °C, contained only anatase phaseand its crystal size was 23 nm. In addition, the FESEM […]
We report on the synthesis, morphology, chemically and structurally of TiO2-NiO-SiO2 nanostructure. The TiO2-NiO-SiO2 nanostructure was synthesized by a method based on the sol-gel method, by the simultaneous gelation of all cations. The coatings were deposited on dried soda-lime glass slides by spin coating. Composite powders and coating on glass have been characterized by XRD, […]
In the present investigation surface modification of silica nanoparticles by alumina was carried out by sol-gel process. Fourier transform infrared (FTIR) and X-ray fluorescence (XRF) confirmed the synthesis of silica and the surface modification as alumina is anchored to silica surface. Field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) investigations observed that […]
