This paper discusses different important gas permeation models such as “Maxwell”, “Bruggeman”, “Lewis-Neilson”, and “Pal” models to predict “Mixed Matrix Membranes” (MMMs) performance. The main parameter considered and discussed is the permeability of Hydrogen on Carbon Nanotubes (CNTs)-MMM. For evaluation of the theoretical models, experimental data of permeability for H2 were compared to the theoretical […]
The performances of two-phase polymer-liquid PEBAX®/polyethylene glycol (PEG) and three-phase polymer-liquid-solid PEBAX®/PEG/MWNT thin film composite membranes for CO2 and CH4 permeation were studied. The effect of temperature and MWNT/PEBAX® ratio on single gas (CO2 and CH4) permeability was investigated. The permeation of both gases was measured at different temperatures from 303 to 323 ˚K. The […]
A PEBAX-nano zeolite X mixed matrix membrane was fabricated and operationally characterized using single gas (CO2) permeation. X-ray diffraction (XRD) analysis was used to study the arrangement of polymer chains of mixed matrix membrane. The membranes were characterized by scanning electron microscopy (SEM) to study cross-sectional morphology. The single gas permeability were carried out for […]
Poly (amide-6-b-ethylene oxide)/Zinc Oxide (PEBA/ZnO) mixed matrix membranes were fabricated using ethanol/water as solvent by solvent casting method. The concentration of ZnO in membrane was set to 0.1 wt.% and the synthesized membranes were characterized by AFM and FTIR. Effects of ZnO nanoparticle on CO2, CH4 and N2 permeabilities, and CO2/N2 and CO2/CH4 selectivities of […]