10.1007/s40089-016-0187-6

Investigation of nanostructured Pd–Ag/n-ZnO thin film based Schottky junction for methane sensing

XML HTML PDF
  • S. Roy*1,
  • S. Das1,
  • C. K. Sarkar2,
  1. IC Design and Fabrication Center, Department of Electronics and Telecommunication Engineering, Jadavpur University, Kolkata, 700032, IN
  2. Nano Device Simulation Laboratory, Department of Electronics and Telecommunication Engineering, Jadavpur University, Kolkata, 700032, IN
Cover Image

Published in Issue 2016-07-07

How to Cite

Roy, S., Das, S., & Sarkar, C. K. (2016). Investigation of nanostructured Pd–Ag/n-ZnO thin film based Schottky junction for methane sensing. International Nano Letters, 6(3 (September 2016). https://doi.org/10.1007/s40089-016-0187-6
Crossref
Scopus
Google Scholar
Europe PMC

HTML views: 29

PDF views: 117

Abstract

Abstract Undoped nanocrystalline n-type ZnO thin film was deposited by chemical deposition technique on a thermally oxidized p-Si (~5 Ω cm resistivity and <100> orientation) substrate. Formation of stable zinc oxide thin film was confirmed by two-dimensional X-Ray Diffraction (XRD) and EDX analysis. The average crystallite size of the ZnO sample was evaluated as ~50 nm. The surface was characterized by Field Emission Scanning Electron Microscopy (FESEM) and Atomic Force Microscopy (AFM) that confirm the formation of nanocrystalline (grain size ~50 nm) ZnO thin film with surface roughness of ~100 nm. Good conversion of precursor into ZnO thin film in the chemical deposition method was evident by Fourier Transform Infrared Spectroscopy (FTIR). A small peak at 479 cm −1 was observed in the FTIR spectrum confirming the formation of quartzite structure of the ZnO. The band gap (~3.44 eV) of the material was calculated from the optical absorption spectroscopy. To prepare Pd–Ag/n-ZnO Schottky junction, Pd–Ag contacts were taken by electron beam evaporation method. I–V characteristics of the junction were studied at different temperatures in inert and reducing ambient (N 2 and N 2  + CH 4 ) with turn on voltage of around 0.2 V. The parameters like ideality factor ( η ), saturation current ( I 0 ), series resistance ( R s), and barrier height ( Φ BO ) of the junction were calculated in the temperature range 50–200 °C in N 2 as well as in 1 % CH 4  + N 2 ambient. It was observed that the ideality factor decreases in the temperature range 50–200 °C ( η  = 12.34 at 50 °C and η  = 1.52 at 200 °C) in N 2 ambient and η  = 1.18 in N 2 +CH 4 ambient at 200 °C. Schottky Barrier Height ( Φ BO ) of the Pd–Ag/n-ZnO junction was found to increase with temperature. A close observation of Pd–Ag/n-ZnO junction in the presence of methane was performed to appreciate its application as methane sensor. The sensing mechanism was illustrated by a simplified energy band diagram.

Keywords

  • Zinc oxide,
  • Chemical deposition,
  • Pd/Ag contact,
  • Schottky junction,
  • Reducing gas
HTML PDF

References

  1. Yi et al. (2005) ZnO nanorods: synthesis, characterization and applications (pp. S22-S34) https://doi.org/10.1088/0268-1242/20/4/003
  2. Kavcar et al. (1992) Characterization of CuInSe2 thin films produced by thermal annealing of stacked elemental layers (pp. 13-23) https://doi.org/10.1016/0927-0248(92)90039-R
  3. Pawar et al. (2009) Preparation of transparent and conducting boron-doped ZnO electrode for its application in dye-sensitized solar cells (pp. 524-527) https://doi.org/10.1016/j.solmat.2008.12.010
  4. Reddy et al. (2008) Behavior of n-ZnO devices at higher temperatures
  5. Sheini et al. (2010) Low temperature growth of aligned ZnO nanowires and their application as field emission cathodes (pp. 691-696) https://doi.org/10.1016/j.matchemphys.2009.12.022
  6. Fan et al. (2005) A low-temperature evaporation route for ZnO nanoneedles and nanosaws (pp. 457-460) https://doi.org/10.1007/s00339-004-3080-5
  7. Chena et al. (2008) Hydrogen monitoring for power plant applications using SiC sensors (pp. 639-642) https://doi.org/10.1016/j.snb.2007.09.010
  8. Wang et al. (2003) Large-scale hexagonal-patterned growth of aligned ZnO nanorods for nano-optoelectronics and nanosensor arrays (pp. 423-427) https://doi.org/10.1021/nl035102c
  9. Kong et al. (2004) Single-crystal nanorings formed by epitaxial self-coiling of polar nanobelts (pp. 1348-1351) https://doi.org/10.1126/science.1092356
  10. Kong and Wang (2003) Spontaneous polarization-induced nanohelixes, nanosprings, and nanorings of piezoelectric nanobelts (pp. 1625-1631) https://doi.org/10.1021/nl034463p
  11. Wang et al. (2004) Mesoporous single crystal ZnO nanowires epitaxially sheathed with Zn2SiO4 (pp. 1215-1218) https://doi.org/10.1002/adma.200306505
  12. Shi et al. (2004) Thermal conductivities of individual tin dioxide nanobelts (pp. 2638-2640) https://doi.org/10.1063/1.1697622
  13. Roy et al. (2012) A highly sensitive methane sensor with nickel alloy microheater on micromachined Si substrate (pp. 84-90) https://doi.org/10.1016/j.sse.2012.05.040
  14. Kim and Sigmund (2004) ZnO nanocrystals synthesized by physical vapor deposition (pp. 275-278)
  15. Wen et al. (2005) 2-aminothiazole as a novel kinase inhibitor template (pp. 15303-15308) https://doi.org/10.1021/jp052466f
  16. Wu et al. (2006) Growth and characterization of chemical-vapor-deposited zinc oxide nanorods (pp. 137-141) https://doi.org/10.1016/j.tsf.2005.07.096
  17. Yu et al. (2005) A general low-temperature route for large-scale fabrication of highly oriented ZnO nanorod/nanotube arrays (pp. 2378-2379) https://doi.org/10.1021/ja043121y
  18. Dalui et al. (2008) Synthesis of DLC films with different sp2/sp3 ratios and their hydrophobic behaviour (pp. 516-519)
  19. Bagnall et al. (1997) Optically pumped lasing of ZnO at room temperature (pp. 2230-2232) https://doi.org/10.1063/1.118824
  20. Kumar and Raji (2011) Synthesis and chaacterisation of nano zinc oxide by sol gel spin coating II (pp. 48-52)
  21. Mondal et al. (2006) Galvanic deposition of hexagonal ZnO thin films on TCO glass substrate (pp. 1748-1752) https://doi.org/10.1016/j.matlet.2005.12.011
  22. Khan et al. (2011) Optical and structural properties of ZnO thin films fabricated by sol–gel method (pp. 340-345)
  23. Yan et al. (2014) Schottky or Ohmic metal–semiconductor contact: influence on photocatalytic efficiency of Ag/ZnO and Pt/ZnO model systems (pp. 101-104) https://doi.org/10.1002/cssc.201300818
  24. Ali et al. (2015) Structural and optical properties of pure and Ag doped ZnO thin films obtained by sol gel spin coating technique (pp. 601-605)
  25. Zheng et al. (2007) Ag/ZnO heterostructure nanocrystals: synthesis, characterization, and photocatalysis (pp. 6980-6986) https://doi.org/10.1021/ic700688f
  26. Wu and Tseng (2006) Photocatalytic properties of nc-Au/ZnOnanorod composites (pp. 51-57) https://doi.org/10.1016/j.apcatb.2006.02.013
  27. Basu and Dutta (1993) Studies on ZnO/p-Si heterojunctions fabricated by a modified CVD method (pp. 267-272) https://doi.org/10.1002/pssa.2211360134
  28. Bhattacharyya et al. (2007) Deposition of nanocrystalline ZnO thin films on p-Si by novel galvanic method and application of the heterojuncion as methane sensor (pp. 823-829) https://doi.org/10.1007/s10854-006-9105-4
  29. Mishra et al. (2010) The effect of catalytic metal contact on methane sensing performance of nanoporous ZnO–Si heterojunction (pp. 273-291)
  30. Basu et al. (2008) The superior performance of the electrochemically grown ZnO thin films as methane sensor (pp. 57-363) https://doi.org/10.1016/j.snb.2008.02.035
  31. Ya-Bin et al. (2011) PEDOT:PSS Schottky contacts on annealed ZnO flms https://doi.org/10.1088/1674-1056/20/4/047301
  32. Wang (2004) Zinc oxide nanostructures: growth, properties and applications (pp. 829-858) https://doi.org/10.1088/0953-8984/16/25/R01