<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ArticleSet PUBLIC "-//NLM//DTD PubMed 2.7//EN" "https://dtd.nlm.nih.gov/ncbi/pubmed/in/PubMed.dtd">
<ArticleSet>
<Article>
<Journal>
<PublisherName>OICC Press</PublisherName>
<JournalTitle>International Nano Letters</JournalTitle>
<Issn>2228-5326</Issn>
<Volume>6</Volume>
<Issue>3 (September 2016)</Issue>
<PubDate PubStatus="epublish">
<Year>2016</Year>
<Month>07</Month>
<Day>07</Day>
</PubDate>
</Journal>
<ArticleTitle>Investigation of nanostructured Pd–Ag/n-ZnO thin film based Schottky junction for methane sensing</ArticleTitle>
<VernacularTitle></VernacularTitle>
<FirstPage></FirstPage>
<LastPage></LastPage>
<ELocationID EIdType="doi">10.1007/s40089-016-0187-6</ELocationID>
<Language>EN</Language>
<AuthorList>
<Author>
<FirstName>S.</FirstName>
<LastName>Roy</LastName>
<Affiliation>IC Design and Fabrication Center, Department of Electronics and Telecommunication Engineering, Jadavpur University, Kolkata, 700032, IN</Affiliation>
<Identifier Source="ORCID"></Identifier>
</Author>
<Author>
<FirstName>S.</FirstName>
<LastName>Das</LastName>
<Affiliation>IC Design and Fabrication Center, Department of Electronics and Telecommunication Engineering, Jadavpur University, Kolkata, 700032, IN</Affiliation>
<Identifier Source="ORCID"></Identifier>
</Author>
<Author>
<FirstName>C. K.</FirstName>
<LastName>Sarkar</LastName>
<Affiliation>Nano Device Simulation Laboratory, Department of Electronics and Telecommunication Engineering, Jadavpur University, Kolkata, 700032, IN</Affiliation>
<Identifier Source="ORCID"></Identifier>
</Author>
</AuthorList>
<PublicationType>Journal Article</PublicationType>
<History>
<PubDate PubStatus="received">
<Year>2016</Year>
<Month>07</Month>
<Day>07</Day>
</PubDate>
</History>
<Abstract>Abstract
Undoped nanocrystalline n-type ZnO thin film was deposited by chemical deposition technique on a thermally oxidized p-Si (~5 Ω cm resistivity and  orientation) substrate. Formation of stable zinc oxide thin film was confirmed by two-dimensional X-Ray Diffraction (XRD) and EDX analysis. The average crystallite size of the ZnO sample was evaluated as ~50 nm. The surface was characterized by Field Emission Scanning Electron Microscopy (FESEM) and Atomic Force Microscopy (AFM) that confirm the formation of nanocrystalline (grain size ~50 nm) ZnO thin film with surface roughness of ~100 nm. Good conversion of precursor into ZnO thin film in the chemical deposition method was evident by Fourier Transform Infrared Spectroscopy (FTIR). A small peak at 479 cm
−1
was observed in the FTIR spectrum confirming the formation of quartzite structure of the ZnO. The band gap (~3.44 eV) of the material was calculated from the optical absorption spectroscopy. To prepare Pd–Ag/n-ZnO Schottky junction, Pd–Ag contacts were taken by electron beam evaporation method. I–V characteristics of the junction were studied at different temperatures in inert and reducing ambient (N
2
 and N
2
 + CH
4
) with turn on voltage of around 0.2 V. The parameters like ideality factor (
η
), saturation current (
I
0
), series resistance (
R
s), and barrier height (
Φ
BO
) of the junction were calculated in the temperature range 50–200 °C in N
2
 as well as in 1 % CH
4
 + N
2
 ambient. It was observed that the ideality factor decreases in the temperature range 50–200 °C (
η
 = 12.34 at 50 °C and 
η
 = 1.52 at 200 °C) in N
2
 ambient and 
η
 = 1.18 in N
2
 +CH
4
 ambient at 200 °C. Schottky Barrier Height (
Φ
BO
) of the Pd–Ag/n-ZnO junction was found to increase with temperature. A close observation of Pd–Ag/n-ZnO junction in the presence of methane was performed to appreciate its application as methane sensor. The sensing mechanism was illustrated by a simplified energy band diagram.</Abstract>
<ObjectList>
<Object Type="keyword">
<Param Name="value">Zinc oxide</Param>
</Object>
<Object Type="keyword">
<Param Name="value">Chemical deposition</Param>
</Object>
<Object Type="keyword">
<Param Name="value">Pd/Ag contact</Param>
</Object>
<Object Type="keyword">
<Param Name="value">Schottky junction</Param>
</Object>
<Object Type="keyword">
<Param Name="value">Reducing gas</Param>
</Object>
</ObjectList>
</Article>
</ArticleSet>