skip to main content
Menu
MJEE-1

Majlesi Journal of Electrical Engineering

Editor-in-Chief: Farbod Razzazi, PhD

Online ISSN: 2345-3796

Print ISSN: 2345-377X

Publishes Quarterly


Volume 11 (2017)

Issue 3, September 2017

Original Article
Optimal Planning of Wind Farm Layout and Integration to Electric Grid Infrastructure

To meet increased demand in energy while reducing greenhouse gas emissions different renewable energy technologies are used. The wind power provides potential benefits as it is a clean, renewable, economic and domestically available power source. Building of sustainable wind farm is subject on many different factors. The aim of the paper is to contribute optimal […]

Original Article
Feasibility Study of a Hybrid Energy System for Emergency Off-grid Operating Conditions

Taking the advantages of alternative energy sources is currently a trending concept in the field of energy management. Meanwhile, microgrids and hybrid energy systems are of great importance due to their numerous benefits for both consumers and utility. This paper presents technical feasibility study of a hybrid energy system, including renewable and non-renewable resources and […]

Original Article
Demand Response: A Promising Solution to DG Allocation Problem

In this paper, a comprehensive algorithm using modified invasive weed optimization is introduced for allocating distribution generation (DG) sources along with considering demand response (DR). Three aspects such as technical, economic and environmental are taken to account to define the optimized size and location for DG or DR. In addition, a new voltage fitness function […]

Original Article
Three-level NPC Converter-based Neuronal Direct Active and Reactive Power Control of the Doubly Fed Induction Machine for Wind Energy Generation

In this paper, neuronal direct power control (DPC) strategy is applied for a doubly fed induction generator (DFIG) based wind energy generation system. Used in three level neutral point clamped (NPC) rectifiers, to directly control of the active and reactive power, switching vectors for rotor side converter were selected from the optimal switching table using […]

Original Article
Fair Clearing of Reactive Power Market

In this paper, new reactive power market structure is studied and presented. Active power flow by itself causes active and reactive losses. Considering reactive losses of active power flow in the reactive power market without paying any costs is the main purpose of this paper. For this purpose, new methodology for reactive power market structure […]

Original Article
Evaluating the Power Systems Reliability by Developing Reliability Network Equivalent Techniques

due to the importance of providing reliable electricity for consumers in today’s power networks, the need for studies in the field of power systems reliability is feeling increasingly considering inherent uncertainties of renewable sources. Therefore, the main challenge of this study is to provide an efficient technique for evaluating reliability of power systems considering economic […]

Original Article
Reconfiguration of Active Distribution Networks in order to Reduce the Cost of Operation by Distribution Companies

The development and installation of Distributed Generators (DGs) in distribution power networks turned these networks from a passive into active ones in power systems. Proper management and control of these resources can help to improve power quality, and increase security and effectiveness of power networks. The power management of DGs considering their operating cost along […]

Original Article
Optimal Sizing of an Isolated Hybrid Wind/PV/Battery System with Considering Loss of Power Supply Probability

In recent years, renewable energy technologies such as wind and solar have had significant growth and they can be used close to the consumption centers in order to remove high-voltage transmission lines. Using these sources with a power storage in the form of a hybrid system provides the increase of system reliability. The importance of […]

Original Article
A Review on DTC-SVM Method with Back-to-Back Converter Connected to the Permanent Magnet Generator and Comparison with DTC in the Matrix Converter

In this paper, the direct torque control torque based on space vector modulation (DTC-SVM) for permanent magnet synchronous generator connected to the variable-speed wind power generation system will be discussed. One of the most widely used in industry to convert voltage converters, converters back to back due to the very good features it is used. […]

XML