skip to main content
Menu
MJEE-1

Majlesi Journal of Electrical Engineering

Editor-in-Chief: Farbod Razzazi, PhD

Online ISSN: 2345-3796

Print ISSN: 2345-377X

Publishes Quarterly

Original Article
A New Soft Switching Current fed DC-DC Converter for Medium Power Applications

In this paper a new zero voltage switching current fed half bridge converter with an auxiliary circuit is proposed. The auxiliary circuit not only absorbs the voltage surge across switches at turn off instance, but also provides zero voltage switching condition for all converter switches. Therefore in this converter the efficiency is higher than hard […]

Original Article
The Effect of Channel Fading on Providing Quality

Transferring real-time traffic such as voice and video over wireless LAN network (WLAN) requires stringent delay and jitter requirements. One of the methods to provide QoS in this standard is Enhanced Distributed Channel Access (EDCA) which benefits form the concept of traffic categories. However, EDCA is a contention based method; therefore it can not guarantee […]

Original Article
Designing Underwater Cellular Networks Parameters

Oceanographic data collection, pollution monitoring, offshore exploration, disaster prevention, assisted navigation and tactical surveillance are some of the applications of underwater networks. Underwater networks should send the gathered information to other users or an offshore station via a base station in the sea. Since the available bandwidth in underwater is severely limited, frequency reuse and […]

Original Article
Human Identification Based on Gait

Analysis of person’s behavioral and psychological features like Gait or the manner of walking, allows human identification process to be able to extract the gait information from a video sequence of different persons at a distance and recognize the specific person. This paper proposes a fast gait recognition algorithm based on the averaged silhouette of […]

Original Article
Usage of Template Matching for Lung Nodule Detection in CT Images

In this paper we describe the lung nodule detection through image processing methods. Therefore, in the preprocessing stage, we use a medical-like method to omit all objects that surely they are not nodule. In this way nodule candidates are obtained. Therefore, false positives decay, while rate of main process does not increase. Finally, nodule candidates […]

Original Article
Control of Wind Turbine Equipped with DFIG after Fault in Power Grid

grid connected wind turbine is daily increasing .a problem in power grid is grid faults.most problem is system stability after faults, also a probable problem of new energy sources in connection with grid is Islanding due to faults.in this condition loading mismatch between generation and load ‏consumption in isolated part of system can cause voltage […]

Original Article
Doppler Compensation by using of Segmented Match Filter

Match filter is one of the important parts of radar receiver. By using of Match Filter, the signal to noise ratio can be maximized so that the probability of detection is increased. Match Filter can be used as a pulse compression filter in radar receiver. Binary phase code is one of the pulse compression methods […]

Original Article
A Novel Queuing Method for DiffServ Traffic over Resilient Packet Ring Networks

Resilient Packet Ring (RPR) is a new kind of metropolitan area network which technically provides complete flexibility in defining service classes that can be sold to the end user.  On the other side, the IETF Diffserv group has created specific definitions for class based services over IP networks. Hereby, we are going to propose a […]

Original Article
VCO Design and Simulation Using TSMC 0.18 m Process to Meet IEEE802.11a Requirements

A complimentary topology is used incorporating TSMC 0.18 mm process to design a CMOS VCO with the center frequency of 5.4 GHz. Simulation results showed tuning range of 13%. The phase noise at 1 MHz offset was measured to be -118.7 dBc/Hz. The VCO core power consumption was 3.3 mW when the power supply voltage […]

Original Article
Design, Simulation and Fabrication of a Permenant Magnet Brush DC Motor

Electrical motor with high performance and maintenance free is very atteractive for the special application in the case of limited energy sources and long operating board. Permenant magnet brush DC motor is very good candidate for such specific applications. In this paper,at first a mathematical model of the motor is persented then, a method for […]