The power electric transformer fault diagnosis is based on dissolved gas-in-oil analysis (DGA). the conventional fault diagnosis methods, i.e. the ratio methods (Rogers, Dornenburg and IEC) and the key gas method, have limitations such as the “no decision” problem. Various artificial intelligence techniques may help solve the problems and present a better solution. In this […]
In this paper trensients data wave obtained by simulation of a real 20kv distribution feeder using EMTP. Wavelet transform is used for the decomposition of signals. Feature extraction and principal analysis (PCA) are applied for feature vector reduction, and Bayes classifier is used for classification of data. Wavelet coefficients are used for the classification of […]
In this paper, the problem of signal detection based on suboptimum-constant false alarm rate (CFAR) detector, in the presence of a mixture of K-distributed clutter, is studied. In this case, a new suboptimum detector named generalized likelihood ratio test and maximum a posteriori (GLRT-MAP) is proposed and compared with generalized likelihood ratio test and linear […]
In two recent decades, fuzzy controllers have been used in controlling different systems successfully. In this article, a new method is given for controlling of permanent magnetic DC motor connected to unbalanced load. Imbalance of load leads to machine vibrations, fluctuation of power, making exhaustion in machine shaft, and equipment depreciation. In this article neuro-fuzzy […]
The main goal of a video tracking algorithm is finding the location of a predefined target in successive video frames. Centroid pointing is one of the most efficient methods in the target tracking. This method can be simply implemented by a digital video processing system that includes a video memory and a powerful digital processor. […]
We have used three-dimensional simulation to investigate application of a new body contact to SOI devices. Performance characteristics of the new body contact on high-voltage SOI devices were studied. Our comparative investigation showed increased current drive, improved cutoff frequency, reduced on-resistance while attaining satisfactory breakdown voltage. The new body contact is applicable to both high […]
In this paper, the H∞ robust control technique is presented to design a power system stabilizer. First, the H∞ standard problem is expressed and then, the modeling and stability analysis of power systems are studied. Finally, a H∞ power system stabilizer is designed and the simulation results are discussed.
This paper opens with introducing the structure of the network control systems and then the impact of the network on the system equations is simultaneously modeled and the factors affecting the network control systems, due to the existence of the network in the system, are examined. Next, a instantaneous approximation based on Kalman filter design […]
It has been shown recently that in many industrial factories, for example rolling and looming, single controller and drive must control a number of multi-phase machines simultaneously. The major difficulty in utilizing this approach is using common single controller for two motors. The most recent solution for this problem is to serialize the stator windings […]
The contour integral (CI) method is developed to analyze H-plane waveguide circuits filled with inhomogeneous dielectric such as circuits including full height dielectric posts. In order to reduce the computational costs, the multimode CI method, which considers the effect of higher order TEn0 modes, is introduced and we present a hybrid method based on multimode […]
