In this paper we study various techniques of power RF amplifier linearization and analyze the most effective circuits of predistortion digital circuits. We propose a method for adapting this circuit and compare the advantages and disadvantages of this circuit with conventional predistortion circuit. The main problem with predisrortion circuit is the memory effect. We propose […]
With increase energy consumption in the world, power network development is necessary but creating a new transmission line is very costly. Therefore increasing line transmission capability is economic. We propose a method to FACTS device to the power network, in this paper and resulted in introducing decrease power network loss's and increase transmission capability with […]
Effective parameters in performance of linear induction motors such asair gap, number of poles and the thickness of secondary must be selected and optimized to increase power coefficients and motor performance significantly. In this paper a double sided linear induction motor in different conditions is designed and next by finite element method analyzed. Then for […]
The expansion of Internet, increases the number of users and applications. Having higher speed and better quality are the main chalanges of computer network development. Using MPLS and proper traffic design, it is possible to improve the quality of service and reduce the possibility of congestion. It is possible to use MPLS in a BGP/MPLS […]
In this paper a new method approach is proposed for automatic segmentation of heart sounds (S1, S2) based on wavelet transform. Unlike many other approaches, this method does not use ECG as reference for detection. The applied criterion for segmentation is based on a very important physiologic attribute of heart which is the difference between […]
The self-heating effects (SHE) in 45nm Silicon-on-Insulator (SOI) and Silicon-on-Diamond (SOD) structures were investigated. As a result of high thermal conductivity of diamond, SHE is much less pronounced in SOD structures. This makes SOD transistors suitable for high power applications were large power density is required. It was shown that in SOD substrate the generated […]
In this paper, a CMOS four quadrant multiplier based on flipped voltage follower and differential squaring circuit is presented. The proposed circuit has a compact architecture operating at a higher speed and a higher input voltage range compared to the previously presented structures. The transistors operate in the both saturation and ohmic regions. The circuit […]
This paper presents a dual-active capacitance in reversed nested Miller compensation (DACRNMC) technique for low-voltage and large capacitive load amplifiers. The frequency bandwidth of the DACRNMC amplifier has been improved due to the usage of active compensation capacitors. The amplifier's die area is reduced in compare to the existing techniques in the RNMC scheme. The […]
Deriving a dynamic model based on the coupled-mode and carrier rate equations, the effects of coupling coefficient and corrugation position on all-optical flip-flops (AOFF) we have analyzed in this paper. Also the self phasemodulation (SPM) in the distributed coupling coefficient distributed feedback semiconductor optical amplifier (DCCDFB- SOA) has been implemented. Then the effects of SPM […]
This paper briefly reviews the different types of Switched reluctance (SR) motors with different geometries and then presents a new configuration for a two phase SR motor with step shaped rotor poles. This motor has the ability to start and run in a specified direction without any difficulties. In another words the motor will always […]
