In this paper two power elements for power controller in transmission line are presented: Variable Frequency Transformer (VFT) and Rotary Power Flow Controller (RPFC). In addition, here a new Optimal Power Flow (OPF) with these elements is presented. In this paper, it has been made use of the Impedance and Admittance nonsymmetrical matrix and the […]
In this paper, the direct torque control (DTC) technique is used for the speed control of induction motors, and then fuzzy logic is used for designing the speed controller, the improvement of torque response and the reduction of the speed error. The DTC method is utilized due to its quick torque response and robustness against […]
A new configuration for a diode-clamped multi-level inverter based on a multi-winding transformer was proposed and simulated. The most important difference between this proposed DC-AC-AC structure and the basic structure is that; in the proposed structure, the back-to-back connected outputs of a multi-winding transformer supersede the capacitors in the basic structure. The proposed structure provides […]
This paper presents a predictive strategy to control torque and flux of an axial flux permanent magnet (AFPM) machine. Unlike conventional direct torque control (DTC) for permanent magnet machines that only six actives voltage vectors of inverter are used to control the torque and flux of the machine, in predictive torque control (PTC), zero voltage […]
To make human–computer interaction (HCI) more natural and friendly, it would be beneficial to give computers the ability to recognize situations the same way a human does. Naturally, people use a spontaneous combination of face, body gesture and speech to express their feelings. In this paper we simulate human perception of emotion with emotion related […]
This paper presents the investigation and evaluation of low cost depth sensor system design for unmanned underwater vehicle (UUV) using pressure sensor. Two types of low cost pressure sensor system design are proposed for underwater vehicle. The pressure sensors are expected to prevent buckling or damaging to the UUV. The first design uses barometric pressure […]
Minimal stopping distance, guaranteed steering ability and stability are the three most important purposes in Anti-lock Braking System (ABS) realm. The ABS system is a nonlinear, time variant and multivariable system with some uncertainties. Some research work has been carried out on ABS control systems using intricate methods which are expensive to implement. In this […]
In this paper optimum size and location of distributed generators (DGs) are determined for maximizing voltage profile and minimizing line losses in distribution systems. For this purpose, Particle Swarm Optimization algorithm (PSO) approach is proposed. The significant innovation of this research paper is using new coding in (PSO) which includes both active and reactive powers […]
Most of the industrial operations involve the use of induction motor drives. The operations of be fault tolerant. This paper investigates the fault operation of a single phase open the drives are so crucial in some events that any fault in the operation of drive could result in serious loss to the industry in terms […]
A photovoltaic (PV) power generation system under partial shaded conditions (PSC) exhibits multiple power peaks in the power-voltage (P-V) characteristic curve and traditional optimization methods fail to detect the global maximum power point (GMPP). This paper proposes a hybrid intelligent to improve the maximum power point (MPP) tracking capability for PV system under partial shading […]
