skip to main content
Menu
MJEE-1

Majlesi Journal of Electrical Engineering

Editor-in-Chief: Farbod Razzazi, PhD

Online ISSN: 2345-3796

Print ISSN: 2345-377X

Publishes Quarterly

Original Article
Control Power Flow in the Presence of Distributed Generators Using Unified Power Flow Controller

In this paper  the power flow control at power systems in the presence of distributed generation is analyzed. The work proposes use ofUnified power flow controller (UPFC) tocontrol the  power flow at the load bus by Main supply in coordination with DG source. This work shows that using UPFC leads to the reduction of the […]

Original Article
Improving the Mitigation of Voltage Flicker by Usage of Fuzzy Control in a Distribution Static Synchronous Compensator (DSTATCOM)

This paper presents a study about of a fuzzy Controlled STATCOM,  which can be applied for mitigation of the voltage flicker in a distribution system. The voltage flicker is produced by a large variable load absorbing continuously changing currents such as an arc furnace. The DSTATCOM includes a voltage-sourced PWM inverter and its control system. […]

Original Article
Optimum Distribution Generator Placement in Power Distribution System Using Ant Colony Algorithm

The recent development in renewable energy systems and the high demand for having clean and low cost energy sources encourage people to use distributed generator (DG) systems. Proper addition and placement of DG units can increase reliability and reduce the loss and production cost. In this paper using Ant Colony method, we developed an optimum […]

Original Article
Fault Location Scheme in Distribution Systems with Distributed Generations Using Neural Networks

Nowadays using DG (distributed generation) in vast variety of cases has been more considerable due to its beneficial advantages, but interconnecting DG to radial distribution systems has some impact on the coordination of protection devices. The main point in the protection scheme is the diagnosis of fault locations, so producing a new method to identify […]