10.1007/s40097-020-00381-7

Eco-friendly green synthesis and characterizations of CoFe2-x AlxO4 nanocrystals: analysis of structural, magnetic, electrical, and dielectric properties

  1. Department of Physics, Sir Parashurambhau College Pune, Pune, Maharashtra, 411030, IN
  2. Department of Physics, Shri Shivaji Science College, Amravati, Maharashtra, 444603, IN
  3. Department of Physics, Dr. Babasaheb Ambedkar, Marathwada University, Aurangabad, Maharashtra, 431004, IN
  4. Department of Physics, Shri Pundlik Maharaj Mahavidyalaya, Nandura, Maharashtra, 443404, IN

Published in Issue 12-01-2021

How to Cite

Chavan, A. R., Khirade, P. P., Somvanshi, S. B., Mukhamale, S. V., & Jadhav, K. M. (2021). Eco-friendly green synthesis and characterizations of CoFe2-x AlxO4 nanocrystals: analysis of structural, magnetic, electrical, and dielectric properties. Journal of Nanostructure in Chemistry, 11(3 (September 2021). https://doi.org/10.1007/s40097-020-00381-7

Abstract

Abstract This work reports, thermal, structural, magnetic, electric, and dielectric investigations of the CoFe 2- x Al x O 4 nanocrystals synthesized through eco-friendly green sol–gel auto-ignition route. X-ray diffractograms exposed the uni-phasic geometry with Fd3m _ Oh7\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\text{O}}_{{\text{h}}}^{7}$$\end{document} space group. The standard crystallite sizes were found in between 24 and 44 nm, confirming the nano-crystalline dimension. FTIR analysis confirmed the two specific vibrational stretching bands corresponding to the spinel ferrite geometry. The surface topology of ferrite nanocrystals with size distribution was effectively observed from TEM micrographs. The magnetic study at room temperature showed lessening in saturation magnetization with rise in Al 3+ concentrations, ascribed to the replacement of Fe 3+ ions by paramagnetic Al 3+ ions. The M–H loops showed the perfect loop of typical soft ferromagnetic behavior of the produced nano-ferrites. The saturation magnetization, coercivity, and magneto-crystalline anisotropy declines with the upsurge in Al 3+ ions which is owing to the non-magnetic contamination in the magnetic matrix. The DC-electrical resistivity was enhanced with growing temperature along with Al 3+ content x . The dielectric parameters boosted pointedly with Al 3+ substitution and decline exponentially with a rise in frequency in compliance with ‘Koops’ phenomenological theory. All the outcomes show that Al 3+ substitution influences the physical characteristics of cobalt ferrite nanocrystals which shows its suitability in various technological applications. Graphic abstract The graphical abstract presenting the synthesis reaction, TEM micrograph (along with crystallite size distribution) and M–H plots for CoFe 2- x Al x O 4 nanocrystals.

Keywords

  • Green synthesis,
  • Spinel ferrite,
  • Structural,
  • Magnetic,
  • Electric properties

References

  1. Torkian et al. (2016) Magnetic properties of hard-soft SrFe10Al2O19/Co0.8Ni0.2Fe2O4 ferrite synthesized by one-pot sol–gel auto-combustion (pp. 408-416) https://doi.org/10.1016/j.jmmm.2016.05.050
  2. Batoo et al. (2009) Study of ac impedance spectroscopy of Al doped MnFe2−2xAl2xO4 480(2) (pp. 596-602) https://doi.org/10.1016/j.jallcom.2009.01.137
  3. Sagar et al. (2020) Effect of calcination temperature on optical, magnetic and dielectric properties of sol-gel synthesized Ni0.2Mg0.8-xZnxFe2O4 (x= 0.0–0.8) (pp. 11515-11529) https://doi.org/10.1016/j.ceramint.2020.01.178
  4. Hashim et al. (2012) Structural, magnetic and electrical properties of Al3+ substituted Ni–Zn ferrite nanoparticles 511(1) (pp. 107-114) https://doi.org/10.1016/j.jallcom.2011.08.096
  5. Karanjkar et al. (2013) Structural, Mössbauer and electrical properties of nickel cadmium ferrites 39(2) (pp. 1757-1764) https://doi.org/10.1016/j.ceramint.2012.08.022
  6. Kalam et al. (2018) Modified solvothermal synthesis of cobalt ferrite (CoFe2O4) magnetic nanoparticles photocatalysts for degradation of methylene blue with H2O2/visible light (pp. 1046-1053) https://doi.org/10.1016/j.rinp.2018.01.045
  7. Hannour et al. (2014) Self-biased cobalt ferrite nanocomposites for microwave applications (pp. 29-33) https://doi.org/10.1016/j.jmmm.2013.10.010
  8. Kharat et al. (2020) Induction heating analysis of surface-functionalized nanoscale CoFe2O4 for magnetic fluid hyperthermia toward noninvasive cancer treatment (pp. 23378-23384) https://doi.org/10.1021/acsomega.0c03332
  9. Abraham et al. (2018) Enhanced magneto-optical and photo-catalytic properties of transition metal cobalt (Co2+ ions) doped spinel MgFe2O4 ferrite nanocomposites (pp. 380-388) https://doi.org/10.1016/j.jmmm.2018.01.001
  10. Raghavender et al. (2010) Magnetic properties of mixed cobalt-aluminum ferrite nanoparticles 48(4) (pp. 512-522)
  11. Chauhan et al. (2018) Structural, magnetic and dielectric properties of aluminum cobalt substituted M−type strontium hexaferrites https://doi.org/10.21741/9781945291692-8
  12. Alshehri et al. (2017) Nitrogen-doped cobalt ferrite/carbon nanocomposites for supercapacitor applications 4(11) (pp. 2952-2958) https://doi.org/10.1002/celc.201700602
  13. Ansari et al. (2016) Structural, morphological, optical and magnetic properties of Al-doped CoFe2O4 nanoparticles prepared by sol-gel auto-combustion method 29(6) (pp. 1525-1532) https://doi.org/10.1007/s10948-016-3423-4
  14. Bitar et al. (2020) Effect of Er3+ and Pr3+ on the structural, magnetic and dielectric properties of Zn-Co ferrite synthesised via co-precipitation method 24(2) (pp. 104-112) https://doi.org/10.1080/14328917.2019.1611252
  15. Houshiar et al. (2014) Synthesis of cobalt ferrite (CoFe2O4) nanoparticles using combustion, coprecipitation, and precipitation methods: A comparison study of size, structural, and magnetic properties (pp. 43-48) https://doi.org/10.1016/j.jmmm.2014.06.059
  16. Kurtan et al. (2013) Temperature dependent magnetic properties of CoFe2O4/CTAB nanocomposite synthesized by sol–gel auto-combustion technique 39(6) (pp. 6551-6558) https://doi.org/10.1016/j.ceramint.2013.01.088
  17. Shamaila et al. (2016) Advancements in nanoparticle fabrication by hazard free eco-friendly green routes (pp. 150-199) https://doi.org/10.1016/j.apmt.2016.09.009
  18. Ahmad et al. (2017) Antibacterial efficacy of Ocimum sanctum leaf extract-treated iron oxide nanoparticles 41(5) (pp. 2055-2061) https://doi.org/10.1039/C7NJ00103G
  19. Naik et al. (2019) Green synthesis of zinc doped cobalt ferrite nanoparticles: Structural, optical, photocatalytic and antibacterial studies https://doi.org/10.1016/j.nanoso.2019.100322
  20. Yadav et al. (2017) Structural, magnetic, dielectric, and electrical properties of NiFe2O4 spinel ferrite nanoparticles prepared by honey-mediated sol-gel combustion (pp. 150-161) https://doi.org/10.1016/j.jpcs.2017.04.004
  21. Kumar et al. (2013) Simple synthesis and magnetic properties of nickel-zinc ferrites nanoparticles by using Aloe vera extract solution 5(6) (pp. 145-151)
  22. Patil et al. (2018) Sugarcane juice mediated eco-friendly synthesis of visible light active zinc ferrite nanoparticles: Application to degradation of mixed dyes and antibacterial activities (pp. 351-362) https://doi.org/10.1016/j.matchemphys.2018.03.038
  23. Amiri et al. (2017) Caffeine: A novel green precursor for synthesis of magnetic CoFe2O4 nanoparticles and pH-sensitive magnetic alginate beads for drug delivery (pp. 1085-1093) https://doi.org/10.1016/j.msec.2017.03.208
  24. Muniz et al. (2013) Influence of heat-treatment environment on Ni-ferrite nanoparticle formation from coconut water precursor 48(4) (pp. 1543-1554) https://doi.org/10.1007/s10853-012-6910-4
  25. Kombaiah et al. (2016) Studies on the microwave assisted and conventional combustion synthesis of Hibiscus rosa-sinensis plant extract based ZnFe2O4 nanoparticles and their optical and magnetic properties 42(2) (pp. 2741-2749) https://doi.org/10.1016/j.ceramint.2015.11.003
  26. Tiwari et al. (2019) Effect of Zn addition on structural, magnetic properties and anti-structural modeling of magnesium-nickel nano ferrites (pp. 78-86) https://doi.org/10.1016/j.matchemphys.2019.02.030
  27. Lassoued et al. (2019) Substituted effect of Al3+ on structural, optical, magnetic and photocatalytic activity of Ni ferrites (pp. 124-133) https://doi.org/10.1016/j.jmmm.2018.12.062
  28. Raut et al. (2016) Structural, electrical, dielectric and magnetic properties of Al3+ substituted Ni-Zn ferrite 29(5) (pp. 1331-1337) https://doi.org/10.1007/s10948-016-3421-6
  29. Srinivasamurthy et al. (2018) Tuning of ferrimagnetic nature and hyperfine interaction of Ni2+ doped cobalt ferrite nanoparticles for power transformer applications 44(8) (pp. 9194-9203) https://doi.org/10.1016/j.ceramint.2018.02.129
  30. Dipesh et al. (2016) Influence of Al3+ doping on structural and magnetic properties of CoFe2-xAlxO4 Ferrite nanoparticles (pp. 413-421) https://doi.org/10.1016/j.jallcom.2016.07.030
  31. Kumar et al. (2013) Effect of non-magnetic substitution on the structural and magnetic properties of spinel cobalt ferrite (CoFe2−xAlxO4) ceramics 24(8) (pp. 2706-2715)
  32. Bromho et al. (2018) Understanding the impacts of Al+3-substitutions on the enhancement of magnetic, dielectric and electrical behaviors of ceramic processed nickel-zinc mixed ferrites: FTIR assisted studies (pp. 444-451) https://doi.org/10.1016/j.materresbull.2017.09.013
  33. Naik et al. (2018) Effect of aluminium doping on structural, optical, photocatalytic and antibacterial activity on nickel ferrite nanoparticles by sol–gel auto-combustion method 29(23) (pp. 20395-20414)
  34. Chavan et al. (2018) Structural, morphological, optical, magnetic and electrical properties of Al3+ substituted nickel ferrite thin films (pp. 2287-2297) https://doi.org/10.1016/j.jallcom.2017.11.326
  35. Pourgolmohammad et al. (2017) Effect of starting solution acidity on the characteristics of CoFe2O4 powders prepared by solution combustion synthesis (pp. 352-358) https://doi.org/10.1016/j.jmmm.2016.10.073
  36. Gabriel Cozma et al. (2014) Correlation between size of CoFe2O4 nanoparticles determined from experimental and calculated data by different mathematical models 10(6) (pp. 869-876) https://doi.org/10.2174/1573413710666140809010251
  37. Nethala et al. (2019) Influence of Cr on structural, spectroscopic and magnetic properties of CoFe2O4 grown by the wet chemical method https://doi.org/10.1016/j.matchemphys.2019.121903
  38. Xi et al. (2010) The enhanced microwave absorption property of CoFe2O4 nanoparticles coated with a Co3Fe7–Co nanoshell by thermal reduction 22(4) https://doi.org/10.1088/0957-4484/22/4/045707
  39. Chavan et al. (2018) Cu2+ substituted NiFe2O4 thin films via spray pyrolysis technique and their high-frequency devices application (pp. 1132-1145) https://doi.org/10.1016/j.jallcom.2018.08.061
  40. Khirade et al. (2017) Room temperature ferromagnetism and photoluminescence of multifunctional Fe doped BaZrO3 nanoceramics (pp. 287-298) https://doi.org/10.1016/j.jallcom.2016.08.224
  41. Khirade et al. (2016) Structural, electrical and dielectrical property investigations of Fe-doped BaZrO3 nanoceramics 45(6) (pp. 3227-3235) https://doi.org/10.1007/s11664-016-4472-y
  42. Toksha et al. (2017) Auto-ignition synthesis of CoFe2O4 with Al3+ substitution for high frequency applications 43(16) (pp. 14347-14353) https://doi.org/10.1016/j.ceramint.2017.07.191
  43. Waghmare et al. (2017) Impact of Al doping on structural and magnetic properties of Co-ferrite 4(11) (pp. 11866-11872)
  44. Khirade et al. (2016) Investigations on the synthesis, structural and microstructural characterizations of Ba1-xSrxZrO3 nanoceramics 504(1) (pp. 216-229) https://doi.org/10.1080/00150193.2016.1241633
  45. Kadam et al. (2013) Structural, morphological, electrical and magnetic properties of Dy doped Ni–Co substitutional spinel ferrite (pp. 59-64) https://doi.org/10.1016/j.jmmm.2012.10.008
  46. Chavan et al. (2019) Impact of trivalent metal ion doping on structural, photoluminescence and electric properties of NiFe2O4 thin films 48(8) (pp. 5184-5194) https://doi.org/10.1007/s11664-019-07329-w
  47. Priya et al. (2019) Effect of Al substitution on the structural, electric and impedance behavior of cobalt ferrite (pp. 453-460) https://doi.org/10.1016/j.vacuum.2018.12.004
  48. Vinayak et al. (2016) Structural, microstructural, and magnetic studies on magnesium (Mg2+)-substituted CoFe2O4 nanoparticles 29(4) (pp. 1025-1032) https://doi.org/10.1007/s10948-015-3348-3
  49. Vlazan et al. (2015) Cobalt ferrite substituted with Mn: synthesis method, characterization and magnetic properties 41(3) (pp. 3760-3765) https://doi.org/10.1016/j.ceramint.2014.11.051
  50. Ghasemi et al. (2014) Effect of Cr and Al substitution cations on the structural and magnetic properties of Ni0.6Zn0.4Fe2−xCrx/2Alx/2O4 nanoparticles synthesized using the sol–gel auto-combustion method (pp. 136-145) https://doi.org/10.1016/j.jmmm.2013.10.022
  51. Aghav et al. (2011) Effect of aluminum substitution on the structural and magnetic properties of cobalt ferrite synthesized by sol–gel auto combustion process 406(23) (pp. 4350-4354) https://doi.org/10.1016/j.physb.2011.08.066
  52. Chilwar et al. (2019) Impact of trivalent metal ion substitution on structural, optical, magnetic and dielectric properties of Li0.5Fe2.5O4 thin films (pp. 43-49) https://doi.org/10.1016/j.physb.2019.04.031
  53. Khirade (2019) Structural, microstructural and magnetic properties of sol–gel-synthesized novel BaZrO3–CoFe2O4 nanocomposite 9(3) (pp. 163-173) https://doi.org/10.1007/s40097-019-0307-8
  54. Chavan et al. (2019) Influence of Cr3+ substitution on structural, morphological, optical, and magnetic properties of nickel ferrite thin films 125(7) https://doi.org/10.1007/s00339-019-2768-5
  55. Bharathi et al. (2009) Magnetoelectric properties of Gd and Nd-doped nickel ferrite 321(22) (pp. 3677-3680) https://doi.org/10.1016/j.jmmm.2009.07.011
  56. Khirade et al. (2016) Effect of Fe–substitution on phase transformation, optical, electrical and dielectrical properties of BaTiO3 nanoceramics synthesized by sol-gel auto combustion method 37(1–4) (pp. 110-120) https://doi.org/10.1007/s10832-016-0044-z
  57. Raju et al. (2014) Microwave properties of Al and Mn doped nickel ferrites at Ku band frequencies (pp. 383-387) https://doi.org/10.1016/j.jmmm.2013.11.040
  58. Kumar et al. (2010) Improvement in electrical and magnetic properties of mixed Mg–Al–Mn ferrite system synthesized by citrate precursor technique 71(3) (pp. 375-380) https://doi.org/10.1016/j.jpcs.2010.01.003
  59. Ahmad and Lone (2017) Development of multifunctional lutetium ferrite nanoparticles: Structural characterization and properties (pp. 50-55) https://doi.org/10.1016/j.matchemphys.2017.08.068
  60. Sontu et al. (2015) Structural, electrical and magnetic characteristics of nickel substituted cobalt ferrite nano particles, synthesized by self combustion method (pp. 376-380) https://doi.org/10.1016/j.jmmm.2014.08.072
  61. Chavan et al. (2020) Influence of trivalent Cr ion substitution on the physicochemical, optical, electrical, and dielectric properties of sprayed NiFe 2 O 4 spinel-magnetic thin films 10(42) (pp. 25143-25154) https://doi.org/10.1039/D0RA04319B
  62. George et al. (2007) Finite size effects on the electrical properties of sol–gel synthesized CoFe2O4 powders: Deviation from Maxwell-Wagner theory and evidence of surface polarization effects 40(6) https://doi.org/10.1088/0022-3727/40/6/001
  63. Vinayak et al. (2015) Electrical and dielectrical properties of low-temperature-synthesized nanocrystalline Mg2+-substituted cobalt spinel ferrite 28(11) (pp. 3351-3356) https://doi.org/10.1007/s10948-015-3159-6
  64. Dar et al. (2010) Synthesis and characterization of nano-sized pure and Al-doped lithium ferrite having high value of dielectric constant 493(1–2) (pp. 553-560) https://doi.org/10.1016/j.jallcom.2009.12.154