10.1186/2193-8865-3-50

Decoration of multi-walled carbon nanotubes (MWCNTs) with different ferrite nanoparticles and its use as an adsorbent

  1. Nanotechnology Department, Faculty of Postgraduate Studies for Advanced Sciences, Beni-Suef University, Beni-Suef, 62111, EG
  2. Minerals Technology Department Central Metallurgical R & D Institute (CMRDI), Helwan, 11421, EG
Cover Image

Published in Issue 15-07-2013

How to Cite

Farghali, A. A., Bahgat, M., ElRouby, W. M. A., & Khedr, M. H. (2013). Decoration of multi-walled carbon nanotubes (MWCNTs) with different ferrite nanoparticles and its use as an adsorbent. Journal of Nanostructure in Chemistry, 3(1 (December 2013). https://doi.org/10.1186/2193-8865-3-50

HTML views: 70

PDF views: 131

Abstract

Abstract A simple and inexpensive synthesis route to produce multi-walled carbon nanotubes (MWCNTs) decorated with CoFe 2 O 4 and Co 0.5 Ni 0.5 Fe 2 O 4 nanoparticles using a simplified hydrothermal precipitation is reported. Transmission electron microscopy and X-ray diffraction confirm the formation of 14.9 nm CoFe 2 O 4 and 26 nm Co 0.5 Ni 0.5 Fe 2 O 4 nanoparticles on MWCNTs surface. The prepared composite was used for methyl green adsorption. The effects of various parameters, such as temperature, initial dye concentration, and composite dosage, were investigated. Experimental results have shown that the amount of adsorbed dye increased with increasing initial dye concentration, composite dosage, and temperature. The adsorption kinetic data were analyzed using pseudo-first-order, pseudo-second-order, and intraparticle diffusion models. It was found that the pseudo-second-order kinetic model was the most appropriate model in describing the adsorption kinetics. The adsorption isotherms of methyl green onto MWCNTs decorated with CoFe 2 O 4 and Co 0.5 Ni 0.5 Fe 2 O 4 nanoparticles were determined at 298, 313, and 323 K. Equilibrium data were fitted to the Langmuir and the Freundlich isotherm models, then the isotherm constants were determined. The equilibrium data were best represented by the Langmuir isotherm model. Thermodynamic parameters such as changes in the free energy of adsorption, enthalpy, entropy, and activation energy were calculated.

Keywords

  • MWCNTs,
  • Decoration,
  • CoFe2O4,
  • Co0.5Ni0.5Fe2O4,
  • Methyl green,
  • Adsorption

References

  1. Tandon and Nandini (2011) Adsorption efficiency of carbon prepared from agricultural waste materials in removing basic dye from aqueous solution (pp. 636-640)
  2. Baskaran et al. (2011) Kinetics of adsorption of ferrous ion onto acid activated carbon from Zea mays dust (pp. 185-195)
  3. Mohammadi et al. (2011) Adsorption process of methyl orange dye onto mesoporous carbon material - kinetic and thermodynamic studies (pp. 457-462) https://doi.org/10.1016/j.jcis.2011.06.067
  4. Loghman and Salar (2013) Superior photocatalytic degradation of azo dyes in aqueous solutions using TiO2/SrTiO3 nanocomposite https://doi.org/10.1186/2193-8865-3-32
  5. Manoj Kumar Reddy et al. (2013) Degradation and mineralization of methylene blue by dielectric barrier discharge non-thermal plasma reactor (pp. 41-47) https://doi.org/10.1016/j.cej.2012.11.116
  6. Panic et al. (2013) Poly (methacrylic acid) Based Hydrogels as Sorbents for Removal of Cationic Dye Basic Yellow 28: Kinetics, Equilibrium Study and Image Analysis (pp. 192-204) https://doi.org/10.1016/j.cej.2012.11.081
  7. Shi et al. (2013) Adsorption of soy isoflavones by activated carbon: kinetics, thermodynamics and influence of soy oligosaccharides (pp. 113-121) https://doi.org/10.1016/j.cej.2012.10.100
  8. Machado et al. (2011) Adsorption of Reactive Red M-2BE dye from water solutions by multi-walled carbon nanotubes and activated carbon (pp. 1122-1131) https://doi.org/10.1016/j.jhazmat.2011.06.020
  9. Wang et al. (2011) Adsorption of phenol and basic dye on carbon nanotubes/carbon fabric composites from aqueous solution (pp. 340-348) https://doi.org/10.1080/01496395.2010.508066
  10. Tang et al. (2012) Simultaneous adsorption of atrazine and Cu (II) from wastewater by magnetic multi-walled carbon nanotube (pp. 470-478) https://doi.org/10.1016/j.cej.2012.09.102
  11. Plata et al. (2008) Industrially synthesized single-walled carbon nanotubes: compositional data for users, environmental risk assessments, and source apportionment https://doi.org/10.1088/0957-4484/19/18/185706
  12. Fraczek-Szczypta et al. (2011) Some observations on carbon nanotubes susceptibility to cell phagocytosis https://doi.org/10.1155/2011/473516
  13. Ngomsik et al. (2005) Magnetic nano- and microparticles for metal removal and environmental applications: a review (pp. 963-970) https://doi.org/10.1016/j.crci.2005.01.001
  14. Yao et al. (2012) Synthesis, characterization, and adsorption properties of magnetic Fe3O4@ graphene nanocomposite (pp. 326-332) https://doi.org/10.1016/j.cej.2011.12.017
  15. Yao et al. (2012) Fabrication of Fe3O4/SiO2 core/shell nanoparticles attached to graphene oxide and its use as an adsorbent (pp. 20-26) https://doi.org/10.1016/j.jcis.2012.04.030
  16. Konicki et al. (2012) Adsorption of anionic dye Direct Red 23 onto magnetic multi-walled carbon nanotubes-Fe3C nanocomposite: Kinetics, equilibrium and thermodynamics (pp. 87-95) https://doi.org/10.1016/j.cej.2012.08.025
  17. Qu et al. (2008) Magnetic removal of dyes from aqueous solution using multi-walled carbon nanotubes filled with Fe2O3 particles (pp. 643-647) https://doi.org/10.1016/j.jhazmat.2008.03.037
  18. Gong et al. (2009) Removal of cationic dyes from aqueous solution using magnetic multi-wall carbon nanotube nanocomposite as adsorbent (pp. 1517-1522) https://doi.org/10.1016/j.jhazmat.2008.09.072
  19. Madrakian et al. (2011) Removal of some cationic dyes from aqueous solutions using magnetic-modified multi-walled carbon nanotubes (pp. 109-114) https://doi.org/10.1016/j.jhazmat.2011.08.078
  20. Bansal (2005) CRC Press https://doi.org/10.1201/9781420028812
  21. Bansal and Goyal (2005) CRC Press, Boca Raton https://doi.org/10.1201/9781420028812
  22. Fugetsu et al. (2004) Caged multiwalled carbon nanotubes as the adsorbents for affinity-based elimination of ionic dyes (pp. 6890-6896) https://doi.org/10.1021/es049554i
  23. Mall et al. (2006) Removal of Orange-G and Methyl Violet dyes by adsorption onto bagasse fly ash–kinetic study and equilibrium isotherm analyses (pp. 210-223) https://doi.org/10.1016/j.dyepig.2005.03.013
  24. Langmuir (1918) The adsorption of gases on plane surfaces of glass, mica and platinum (pp. 1361-1403) https://doi.org/10.1021/ja02242a004
  25. Freundlich (1906) Over the adsorption in solution (pp. 385-470)
  26. Hall et al. (1966) Pore-and solid-diffusion kinetics in fixed-bed adsorption under constant-pattern conditions (pp. 212-223) https://doi.org/10.1021/i160018a011
  27. Wang et al. (2005) A comparative study of dye removal using fly ash treated by different methods (pp. 1401-1407) https://doi.org/10.1016/j.chemosphere.2005.01.091
  28. Haghseresht and Lu (1998) Adsorption characteristics of phenolic compounds onto coal-reject-derived adsorbents (pp. 1100-1107) https://doi.org/10.1021/ef9801165
  29. Demirbas et al. (2009) Adsorption kinetics and equilibrium of copper from aqueous solutions using hazelnut shell activated carbon (pp. 480-487) https://doi.org/10.1016/j.cej.2008.09.027
  30. Weber and Morris (1963) Kinetics of adsorption on carbon from solution. J Sanit Eng Div, J. Sanit. Eng. Div. Am. Soc. Civ (pp. 31-60)
  31. Ozcan et al. (2004) Adsorption of Acid Blue 193 from aqueous solutions onto Na-bentonite and DTMA-bentonite (pp. 44-54) https://doi.org/10.1016/j.jcis.2004.07.035
  32. Zcan and Zcan (2005) Adsorption of Acid Red 57 from aqueous solutions onto surfactant-modified sepiolite (pp. 252-259) https://doi.org/10.1016/j.jhazmat.2005.05.039
  33. Kannan and Sundaram (2001) Kinetics and mechanism of removal of methylene blue by adsorption on various carbons–a comparative study (pp. 25-40) https://doi.org/10.1016/S0143-7208(01)00056-0
  34. Karagz et al. (2008) Activated carbons from waste biomass by sulfuric acid activation and their use on methylene blue adsorption (pp. 6214-6222) https://doi.org/10.1016/j.biortech.2007.12.019
  35. Chen et al. (2007) Adsorption kinetic, thermodynamic and desorption studies of Th (IV) on oxidized multi-wall carbon nanotubes (pp. 449-454) https://doi.org/10.1016/j.colsurfa.2007.03.007
  36. Doan and Alkan (2003) Adsorption kinetics of methyl violet onto perlite (pp. 517-528) https://doi.org/10.1016/S0045-6535(02)00629-X
  37. Nollet et al. (2003) Removal of PCBs from wastewater using fly ash (pp. 655-665) https://doi.org/10.1016/S0045-6535(03)00517-4
  38. Lazaridis and Asouhidou (2003) Kinetics of sorptive removal of chromium (VI) from aqueous solutions by calcined Mg-Al-CO3 hydrotalcite (pp. 2875-2882) https://doi.org/10.1016/S0043-1354(03)00119-2
  39. Bahgat et al. (2011) Synthesis and modification of multi-walled carbon nano-tubes (MWCNTs) for water treatment applications (pp. 307-313) https://doi.org/10.1016/j.jaap.2011.07.002