Structural, microstructural and magnetic properties of sol–gel-synthesized novel BaZrO3–CoFe2O4 nanocomposite
Abstract
Abstract
A novel 0.5(BaZrO
3
)–0.5(CoFe
2
O
4
) (BZ–CF) nanocomposite ceramics has been synthesized using sol–gel autocombustion and mixing technique. The structural analysis was carried out using X-ray diffraction (XRD) technique. The XRD pattern shows mixed perovskite and spinel ferrite phases with simple cubic structure for the BZ–CF nanocomposite. The calculated average crystallite size of the samples varies of the order of the nanoregime. The lattice parameter (a) and other structural parameter were obtained using XRD data and it is found that the structural data of pure parent ceramics were in the reported range. The surface morphology of grains of the present samples was examined using field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM). The FESEM images show spherical particles with average grain size in the nanometer range. Compositional stoichiometry was confirmed by energy dispersive spectrum (EDX) analysis. Fourier-transform infrared spectra (FTIR) of barium zirconate (BZ) and cobalt ferrite (CF) confirmed the perovskite and spinel ferrite structure, respectively. However, the FTIR spectrum of BZ–CF nanocomposite confirmed the change in crystal structure due to mixed phases. The M–H curves recorded at room temperature using pulse field hysteresis loop tracer technique exhibits a weak hysteresis loop for BZ–CF nanocomposite, perfectly diamagnetic nature for BZ nanoceramics, and typical ferromagnetic hysteresis loop for pure CF nanoceramics.
Graphic abstract
The graphical abstract presenting the synthesis process, FESEM micrograph and M–H plot for BZ–CF nanocomposite.
Keywords
- Nanocomposite,
- Sol–gel autocombustion,
- Barium zirconate,
- Cobalt ferrite,
- Nanoceramics
References
- Hull and Clyne (1996) Cambridge University Press https://doi.org/10.1017/CBO9781139170130
- Khirade et al. (2016) Multiferroic iron doped BaTiO3 nanoceramics synthesized by sol–gel auto combustion: influence of iron on physical properties (pp. 12441-12451) https://doi.org/10.1016/j.ceramint.2016.05.021
- Sanpo et al. (2015) Multifunctional spinel ferrite nanoparticles for biomedical application (pp. 183-217) https://doi.org/10.1002/9781118998977.ch4
- Rondinelli et al. (2012) Control of octahedral connectivity in perovskite oxide heterostructures: an emerging route to multifunctional materials discovery (pp. 261-270) https://doi.org/10.1557/mrs.2012.49
- Sapate et al. (2014) Structural, magnetic and magnetoelectric properties of the magnetoelectric composite material (pp. 3659-3663) https://doi.org/10.1007/s10854-014-1938-7
- Testino (2006) Preparation of multiferroic composites of BaTiO3–Ni0.5Zn0.5Fe2O4 ceramics (pp. 3031-3036) https://doi.org/10.1016/j.jeurceramsoc.2006.02.022
- Dimos and Mueller (1998) Perovskite thin films for high-frequency capacitor applications (pp. 397-419) https://doi.org/10.1146/annurev.matsci.28.1.397
- Ishihara (2009) Springer https://doi.org/10.1007/978-0-387-77708-5
- Tressler et al. (2006) A comparison of the underwater acoustic performance of single crystal versus piezoelectric ceramic-based “cymbal” projectors (pp. 879-889) https://doi.org/10.1121/1.2150153
- Bibes and Barthélémy (2008) Multiferroics: towards a magnetoelectric memory https://doi.org/10.1038/nmat2189
- Galasso (2013) Elsevier
- Gao and Guo (2010) Structural and electrochemical properties of yttrium-doped barium zirconate by addition of CuO (pp. 288-293) https://doi.org/10.1016/j.jallcom.2009.12.082
- Khirade et al. (2016) Structural, electrical and dielectrical property investigations of Fe-doped BaZrO3 nanoceramics (pp. 3227-3235) https://doi.org/10.1007/s11664-016-4472-y
- Sanchez and McDonald (1998) Google Patents
- Farooq et al. (2001) Google Patents
- Parida (2012) Structural refinement, optical and microwave dielectric properties of BaZrO3 (pp. 2129-2138) https://doi.org/10.1016/j.ceramint.2011.10.054
- Ali et al. (2012) An investigation of dielectric resonator antenna produced from silicon (100) enhanced by strontium doped-barium zirconate films (pp. 411-420) https://doi.org/10.1007/s10971-011-2641-2
- Mathew and Juang (2007) An overview of the structure and magnetism of spinel ferrite nanoparticles and their synthesis in microemulsions (pp. 51-65) https://doi.org/10.1016/j.cej.2006.11.001
- O’handley (2000) Soft magnetic materials
- Song (2018) Facile synthesis and high-frequency performance of CoFe2O4 nanocubes with different size (pp. 793-798) https://doi.org/10.1016/j.jmmm.2017.12.019
- Vinayak et al. (2015) Electrical and dielectrical properties of low-temperature-synthesized nanocrystalline Mg2+-substituted cobalt spinel ferrite (pp. 3351-3356) https://doi.org/10.1007/s10948-015-3159-6
- Amiri and Shokrollahi (2013) The role of cobalt ferrite magnetic nanoparticles in medical science (pp. 1-8) https://doi.org/10.1016/j.msec.2012.09.003
- Ding (2018) Single-walled carbon nanotubes wrapped CoFe2O4 nanorods with enriched oxygen vacancies for efficient overall water splitting (pp. 1026-1032) https://doi.org/10.1021/acsaem.8b01338
- Lin (2006) Multifunctional composite nanoparticles: magnetic, luminescent, and mesoporous (pp. 5170-5172) https://doi.org/10.1021/cm061976z
- Kim (2009) High energy density nanocomposites based on surface-modified BaTiO3 and a ferroelectric polymer (pp. 2581-2592) https://doi.org/10.1021/nn9006412
- Kumar (2016) Multiferroic and magnetoelectric properties of Ba0.85Ca0.15Zr0. 1Ti0. 9O3–CoFe2O4 core–shell nanocomposite (pp. 294-299) https://doi.org/10.1016/j.jmmm.2016.02.065
- Kanakadurga et al. (2013) Preparation and characterization of BaTiO3 + MgCuZnFe2O4 nanocomposites (pp. 112-117) https://doi.org/10.1016/j.jmmm.2013.04.037
- Liu (2015) Gram-scale synthesis of graphene quantum dots from single carbon atoms growth via energetic material deflagration (pp. 4319-4327) https://doi.org/10.1021/acs.chemmater.5b00774
- Vestal and Zhang (2003) Synthesis and magnetic characterization of Mn and Co spinel ferrite-silica nanoparticles with tunable magnetic core (pp. 1739-1743) https://doi.org/10.1021/nl034816k
- Nitta et al. (1989) Interface reactions between silicon dioxide-lead oxide glass and manganese zinc ferrite (pp. 1351-1354) https://doi.org/10.1111/j.1151-2916.1989.tb07650.x
- Paterson et al. (1999) Complex permeability of soft magnetic ferrite/polyester resin composites at frequencies above 1 MHz (pp. 394-396) https://doi.org/10.1016/S0304-8853(98)00772-0
- Bayrakdar (2011) Complex permittivity, complex permeability and microwave absorption properties of ferrite–paraffin polymer composites (pp. 1882-1885) https://doi.org/10.1016/j.jmmm.2011.02.030
- Khirade et al. (2016) Effect of Fe–substitution on phase transformation, optical, electrical and dielectrical properties of BaTiO3 nanoceramics synthesized by sol–gel auto combustion method (pp. 110-120) https://doi.org/10.1007/s10832-016-0044-z
- Kanie et al. (2014) Hydrothermal synthesis of BaZrO3 fine particles controlled in size and shape and fluorescence behavior by europium doping (pp. 3548-3555) https://doi.org/10.1039/C4NJ00443D
- Macario et al. (2010) An efficient microwave-assisted hydrothermal synthesis of BaZrO3 microcrystals: growth mechanism and photoluminescence emissions (pp. 3612-3619) https://doi.org/10.1039/c004034g
- Raut et al. (2014) Synthesis, structural investigation and magnetic properties of Zn2+ substituted cobalt ferrite nanoparticles prepared by the sol–gel auto-combustion technique (pp. 87-92) https://doi.org/10.1016/j.jmmm.2014.01.039
- Vinayak et al. (2016) Structural, microstructural, and magnetic studies on magnesium (Mg2+)-substituted CoFe2O4 nanoparticles (pp. 1025-1032) https://doi.org/10.1007/s10948-015-3348-3
- Goyal et al. (2015) Mn substituted cobalt ferrites [CoMnxFe2−xO4 (x = 0.0, 0.2, 0.4, 0.6, 0.8, 1.0)]: as magnetically separable heterogeneous nanocatalyst for the reduction of nitrophenols (pp. 877-889) https://doi.org/10.1016/j.apsusc.2014.11.065
- Khirade et al. (2016) Investigations on the synthesis, structural and microstructural characterizations of Ba1-x Sr x ZrO3 nanoceramics (pp. 216-229) https://doi.org/10.1080/00150193.2016.1241633
- Yamanaka (2005) Thermochemical and thermophysical properties of alkaline-earth perovskites (pp. 61-66) https://doi.org/10.1016/j.jnucmat.2005.04.017
- Cullity, B.D.: Elements of X-ray Diffraction (2001)
- Pornprasertsuk et al. (2012) Preparation of doped BaZrO3 and BaCeO3 from nanopowders (pp. 1813-1819) https://doi.org/10.1007/s12541-012-0238-5
- Ostos (2009) Synthesis and characterization of A-site deficient rare-earth doped BaZrxTi1−xO3 perovskite-type compounds (pp. 1016-1022) https://doi.org/10.1016/j.solidstatesciences.2009.01.006
- Waldron (1955) Infrared spectra of ferrites https://doi.org/10.1103/PhysRev.99.1727
- Kumar (2008) Characterization and sintering of BaZrO3 nanoparticles synthesized through a single-step combustion process (pp. 528-531) https://doi.org/10.1016/j.jallcom.2007.04.032
- Khirade et al. (2017) Room temperature ferromagnetism and photoluminescence of multifunctional Fe doped BaZrO3 nanoceramics (pp. 287-298) https://doi.org/10.1016/j.jallcom.2016.08.224
- Jadhav et al. (2010) Effect of Zn substitution on magnetic properties of nanocrystalline cobalt ferrite https://doi.org/10.1063/1.3499346
- Bardapurkar et al. (2019) Structural, magnetic and catalytical properties of cobalt ferrite nanoparticles dispersed in silica matrix https://doi.org/10.1088/2053-1591/aafe32
- Toksha et al. (2008) Structural investigations and magnetic properties of cobalt ferrite nanoparticles prepared by sol–gel auto combustion method (pp. 479-483) https://doi.org/10.1016/j.ssc.2008.06.040
10.1007/s40097-019-0307-8