Published in Issue 2015-04-28
How to Cite
Hassan, M. A. M., Hussian, H. A. R. A., & Dawood, M. O. (2015). Synthesis of semiconductor oxide nanosheets, nanotetrapods and nanoplane-suite like grown on metal foil using different method. International Nano Letters, 5(3 (September 2015). https://doi.org/10.1007/s40089-015-0148-5
HTML views: 8
PDF views: 115
Abstract
Abstract ZnO production nanostructure using different method: first method, electrochemical deposition on Zn foil using 0.3 M zinc sulfate heptahydrate (ZnSO 4 ·7H 2 O) and sulfuric acid aqueous solution at a current density of 30 and 35 mA/cm 2 for deposition time 40 min at room temperature and second method, Zn foils were thermally oxidized in a conventional tube furnace at a temperature equal range of 700–900 °C in air for 5 h or less in static air to prepared semiconductor nanomaterials ZnO nanorods, nanotetrapods and nanoplane. The XRD diffraction of higher intensity peaks at (101) and (002) miller indices for two methods can be recognized to a hexagonal wurtzite structure unit cell. Surface morphology images with different magnifications which clearly shows that the whole Zn foil and rod substrate obtained ZnO nanosheets, nanotetrapods, nanorods and growth nanoplanes were also found. The length of these nanotetrapods and nanorods lies in the equal range of 1–1.5 µm with an average diameter of 80 nm. It was well known that ZnO nano crystal exhibited two emission peaks. One was located at about 365 nm wavelength (UV luminescence band), and the other peak position at 475 nm wavelength (green luminescence band).Keywords
- ZnO nanotetrapods,
- FESEM,
- Photoluminescence,
- Electrochemical deposition,
- Thermal oxidation
References
- Taabouche, A., Bouabellou, A., Kermiche, F., Hanini, F., Menakh, S., Bouachiba, Y., Kerdja, T., Benazzouz, C., Bouafia, M., Amara, S.: Effect of substrates on the properties of ZnO thin films grown by pulsed laser deposition. Adv. Mater. Phys. Chem.
- 3
- , 209–213 (2013)
- Lau et al. (2005) Laser action in ZnO nanoneedles selectively grown on silicon and plastic substrates https://doi.org/10.1063/1.1984106
- Sun et al. (2006) Mechanism of ZnO nanotube growth by hydrothermal methods on ZnO film-coated Si substrates (pp. 15186-15192) https://doi.org/10.1021/jp062299z
- Samanta, P.K., Patra, S.K., Ghosh A., Chaudhuri, P.R.: Visible emission from ZnO nanorods synthesized by a simple wet chemical method. Int. J. Nanosci. Nanotechnol.
- 1
- (1–2), 81–90 (2009)
- Cao and Cai (2008) From ZnO nanorods to nanoplates: chemical bath deposition growth and surface-related emissions (pp. 680-685) https://doi.org/10.1021/jp076870l
- George et al. (2010) Microstructure and field emission characteristics of ZnO nanoneedles grown by physical vapor deposition (pp. 634-638) https://doi.org/10.1016/j.matchemphys.2010.05.029
- Wu et al. (2006) Controlled one-step fabrication of highly oriented ZnO nanoneedle/nanorods arrays at near room temperature 21(15) (pp. 1655-1657) https://doi.org/10.1039/b516497d
- Kumar et al. (2005) Synthesis of photoconducting ZnO nano-needles using an unbalanced magnetron sputtered ZnO/Zn/ZnO multilayer structure (pp. 1167-1171) https://doi.org/10.1088/0957-4484/16/8/031
- Senthil Kumar et al. (2011) Structure-controlled growth of ZnO nanonails by thermal evaporation technique 46(9) (pp. 991-996) https://doi.org/10.1002/crat.201100141
- Feng et al. (2014) Growth and characterization of ZnO needles https://doi.org/10.1007/s13204-012-0174-9
10.1007/s40089-015-0148-5