10.1186/2228-5326-3-55

Local structure modification and phase transformation of TiO2 nanoparticles initiated by oxygen defects, grain size, and annealing temperature

  1. Department of Physics, Tezpur University, Napaam, Assam, 784028, IN
Cover Image

Published in Issue 2013-11-14

How to Cite

Choudhury, B., & Choudhury, A. (2013). Local structure modification and phase transformation of TiO2 nanoparticles initiated by oxygen defects, grain size, and annealing temperature. International Nano Letters, 3(1 (December 2013). https://doi.org/10.1186/2228-5326-3-55

PDF views: 150

HTML views: 103

Abstract

Abstract TiO 2 nanoparticles acquire complete crystalline anatase phase on thermal treatment of as-prepared anatase TiO 2 at 450°C. Anatase-rutile mixed phase and rutile phase are achieved by annealing anatase TiO 2 at 700°C and 950°C respectively. The anatase-rutile mixed phase TiO 2 has 87.8% rutile phase. This signifies that the percentage of rutile fraction in mixed phase can be tailored by changing the annealing temperature. As-prepared anatase TiO 2 with a crystallite size of 5 nm has a positive strain ( η ) of 0.0345, which is due to the presence of oxygen defects on the surface and on the grain boundary. Removal of defects releases the strain and relaxes the lattice to its normal state, and thus, a negative strain η of (−) 0.0006 is observed in complete rutile phase. The interface between nearest anatase crystallites and between anatase and rutile crystallites contains oxygen vacancies that act as nucleation site for the growth of rutile nuclei. These oxygen defects are responsible for the broadening of the Raman E g peak of anatase and for the shortening of the phonon lifetime in a 5-nm-sized anatase nanocrystallite. Removal of defects decreases the Raman peak width and increases the phonon lifetime in a larger rutile crystallite. The long lifetime of phonon in a larger rutile crystallite is due to temperature-dependent anharmonic phonon coupling.

Keywords

  • Defects,
  • Nucleation,
  • Raman peak,
  • Phonon coupling

References

  1. Sui et al. (2006) FTIR study on the formation of TiO2 nanostructures in supercritical CO2 (pp. 16212-16218) https://doi.org/10.1021/jp0570521
  2. Anpo and Takeuchi (2003) The design and development of highly reactive titanium oxide photocatalysts operating under visible light irradiation (pp. 505-516) https://doi.org/10.1016/S0021-9517(02)00104-5
  3. Song et al. (2004) Electrospun TiO2 electrodes for dye-sensitized solar cells (pp. 1861-1865) https://doi.org/10.1088/0957-4484/15/12/030
  4. Liu et al. (2011) A TiO2-nanotube-array-based photocatalytic fuel cell using refractory organic compounds as substrates for electricity generation (pp. 10314-10316) https://doi.org/10.1039/c1cc13388h
  5. Qiu et al. (2011) Recent applications of TiO2 nanomaterials in chemical sensing in aqueous media (pp. 875-890) https://doi.org/10.1016/j.snb.2011.08.077
  6. Valtierra et al. (2009) Self-cleaning test of doped TiO2-coated glass plates under solar exposure (pp. 598-606) https://doi.org/10.1021/ie8008555
  7. Coronado et al. (2008) Phase pure TiO2 nanoparticles: anatase, brookite and rutile https://doi.org/10.1088/0957-4484/19/14/145605
  8. Shi et al. (2007) Photoluminescence characteristics of TiO2 and their relationship to the photoassisted reaction of water/methanol Mixture (pp. 693-699) https://doi.org/10.1021/jp065744z
  9. Madras et al. (2007) Kinetic model for TiO2 polymorphic transformation from anatase to rutile (pp. 250-255) https://doi.org/10.1111/j.1551-2916.2006.01369.x
  10. Ding et al. (2010) Study on the anatase to rutile phase transformation and controlled synthesis of rutile nanocrystals with the assistance of ionic liquid (pp. 10294-10302) https://doi.org/10.1021/la100468e
  11. Li et al. (2004) Size dependence of thermal stability of TiO2 nanoparticles (pp. 6663-6668) https://doi.org/10.1063/1.1807520
  12. Scotti et al. (2008) Sol–gel pure and mixed phase titanium dioxide for photocatalytic purposes: relations between phase composition, catalytic activity, and charge-trapped sites (pp. 4051-4061) https://doi.org/10.1021/cm800465n
  13. Wang and Ying (1999) Sol–gel synthesis and hydrothermal processing of anatase and rutile titania nanocrystals (pp. 3113-3120) https://doi.org/10.1021/cm990180f
  14. Zhang and Banfield (2000) Phase transformation of nanocrystalline anatase-to-rutile via combined interface and surface nucleation (pp. 437-448) https://doi.org/10.1557/JMR.2000.0067
  15. Penn and Banfield (1999) Formation of rutile nuclei at anatase (112) twin interfaces and the phase transformation mechanism in nanocrystalline titania (pp. 871-876)
  16. Gouma and Mills (2001) Anatase-to-rutile transformation in titania powders (pp. 619-622) https://doi.org/10.1111/j.1151-2916.2001.tb00709.x
  17. Rath et al. (2009) Oxygen vacancy induced structural phase transformation in TiO2 nanoparticles (pp. 205101-205106) https://doi.org/10.1088/0022-3727/42/20/205101
  18. Zhang and Banfield (2000) Understanding polymorphic phase transformation behavior during growth of nanocrystalline aggregates: insights from TiO2 (pp. 3481-3487) https://doi.org/10.1021/jp000499j
  19. Zhang et al. (2000) Raman scattering study of anatase TiO2 nanocrystals (pp. 912-916) https://doi.org/10.1088/0022-3727/33/8/305
  20. Skryshevskyy et al. (2004) Infrared-active defects in a TiO2 mixture of coexisting anatase and rutile phases (pp. 157-161) https://doi.org/10.1002/pssa.200306734
  21. Choudhury and Choudhury (2012) Ce3+ and oxygen vacancy mediated tuning of structural and optical properties of CeO2 nanoparticles (pp. 666-671) https://doi.org/10.1016/j.matchemphys.2011.10.032
  22. Qin and Szpunar (2005) Origin of lattice strain in nanocrystalline materials (pp. 649-656) https://doi.org/10.1080/09500830500474339
  23. Moghaddam and Nasirian (2012) Dependence of activation energy and lattice strain on TiO2 nanoparticles? (pp. 201-212) https://doi.org/10.1080/17458080.2011.620023
  24. Gnaser et al. (2011) Temperature-dependent grain growth and phase transformation in mixed anatase-rutile nanocrystalline TiO2 films (pp. 1635-1640) https://doi.org/10.1002/pssa.201026784
  25. Yanagisawa and Ovenstone (1999) Crystallization of anatase from amorphous titania using the hydrothermal technique: effects of starting material and temperature (pp. 7781-7787) https://doi.org/10.1021/jp990521c
  26. Lee and Zuo (2004) Growth and phase transformation of nanometer-sized titanium oxide powders produced by the precipitation method (pp. 473-479) https://doi.org/10.1111/j.1551-2916.2004.00473.x
  27. Zhang et al. (2009) UV Raman spectroscopic study on TiO2. II. Effect of nanoparticle size on the outer/inner phase transformation (pp. 1698-1704) https://doi.org/10.1021/jp808013k
  28. Zhang et al. (2006) UV Raman spectroscopic study on TiO2. I. Phase transformation at the surface and in the bulk (pp. 927-935) https://doi.org/10.1021/jp0552473
  29. Shannon (1964) Phase transformation studies in TiO2 supporting different defect mechanism in vacuum reduced and hydrogen reduced rutile (pp. 3414-3416) https://doi.org/10.1063/1.1713231
  30. Scanlon et al. (2013) Band alignment of rutile and anatase TiO2 (pp. 798-801) https://doi.org/10.1038/nmat3697
  31. Dillon and Harmer (2007) Diffusion controlled abnormal grain growth in ceramics (pp. 1227-1236) https://doi.org/10.4028/www.scientific.net/MSF.558-559.1227
  32. Kim et al. (2007) HRTEM study of phase transformation from anatase to rutile in nanocrystalline TiO2 particles (pp. 65-68) https://doi.org/10.4028/www.scientific.net/MSF.534-536.65
  33. Borchert et al. (2005) Determination of nanocrystal sizes: a comparison of TEM, SAXS, and XRD studies of highly monodisperse CoPt3 particles (pp. 1931-1936) https://doi.org/10.1021/la0477183
  34. Baalousha et al. (2012) Characterisation of cerium oxide nanoparticles—part 1: size measurements (pp. 983-993) https://doi.org/10.1002/etc.1785
  35. Takahashi and Hiroharu (2009) Analysis of surface OH groups on TiO2 single crystal with polarization modulation infrared external reflection spectroscopy (pp. 20322-20327) https://doi.org/10.1021/jp903426s
  36. Amores et al. (1995) Anatase crystal growth and phase transformation to rutile in high-area TiO2, MoO3–TiO2 and other TiO2-supported oxide catalytic systems (pp. 1245-1249) https://doi.org/10.1039/jm9950501245
  37. Ha et al. (2000) Anatase-rutile transition of precipitated titanium oxide with alcohol rinsing (pp. 16-20) https://doi.org/10.1006/jcis.1999.6607
  38. Brojcin et al. (2005) Infrared study of laser synthesized anatase TiO2 nanopowders (pp. 1415-1420) https://doi.org/10.1088/0022-3727/38/9/014
  39. Ocana et al. (1988) Factors affecting the infrared and Raman spectra of rutile powders (pp. 364-372) https://doi.org/10.1016/0022-4596(88)90176-4
  40. Swamy et al. (2006) Size-dependent modifications of the Raman spectrum of rutile TiO2 (pp. 163118-163120) https://doi.org/10.1063/1.2364123
  41. Mali et al. (2011) Hydrothermal synthesis of rutile TiO2 with hierarchical microspheres and their characterization (pp. 6349-6351) https://doi.org/10.1039/c1ce05928a
  42. Georgescu et al. (2012) Experimental assessment of the phonon confinement in TiO2 anatase nanocrystallites by Raman spectroscopy (pp. 876-883) https://doi.org/10.1002/jrs.3103
  43. Sahoo et al. (2009) Raman line shapes of optical phonons of different symmetries in anatase TiO2 nanocrystals (pp. 16927-16933) https://doi.org/10.1021/jp9046193
  44. Zhu et al. (2005) Size and phonon-confinement effects on low-frequency Raman mode of anatase TiO2 nanocrystal (pp. 220-227) https://doi.org/10.1016/j.physleta.2005.04.008
  45. Gao (2007) Strong anharmonicity and phonon confinement on the lowest-frequency Raman mode of nanocrystalline anatase TiO2 (pp. 2597-2604) https://doi.org/10.1002/pssb.200743073
  46. Wang et al. (2008) Lattice vibration fundamentals in nanocrystalline anatase investigated with Raman scattering https://doi.org/10.1088/0953-8984/20/8/085212
  47. Paul and Choudhury (2008) Investigation of the optical property and photocatalytic activity of mixed phase nanocrystalline titania
  48. Lei and Duan (2008) Highly active mixed-phase TiO2 photocatalysts fabricated at low temperature and the correlation between phase composition and photocatalytic activity (pp. 1263-1267) https://doi.org/10.1016/S1001-0742(08)62219-6