10.1007/s40095-018-0270-z

Numerical analysis of the surface and geometry of plate fin heat exchangers for increasing heat transfer rate

HTML PDF
  • Iman Shahdad1,
  • Farivar Fazelpour*2,
  1. Department of Mechanical Engineering, Faculty of Engineering, Islamic Azad University, South Tehran Branch, Tehran, IR
  2. Department of Energy Systems Engineering, Faculty of Engineering, Islamic Azad University, South Tehran Branch, Tehran, IR
Cover Image

Published in Issue 2018-03-19

How to Cite

Shahdad, I., & Fazelpour, F. (2018). Numerical analysis of the surface and geometry of plate fin heat exchangers for increasing heat transfer rate. International Journal of Energy and Environmental Engineering, 9(2 (June 2018). https://doi.org/10.1007/s40095-018-0270-z
Crossref
Scopus
Google Scholar
Europe PMC

HTML views: 67

PDF views: 128

Abstract

Abstract This paper investigates the flow field and turbulent flow heat transfer around an array of plain and perforated fin using Fluent software within the range of 20,000–50,000 Reynolds. Regarding the turbulent flow, the k - ε RNG turbulence model was implemented, and SIMPLE algorithm was used for solving the equations of three-dimensional, steady, and incompressible flow. In the simulation process, air was considered as the working fluid with consistent physical properties. The results revealed that perforated fins increase the heat transfer coefficient as well as Nusselt number. The highest heat transfer coefficient and Nusselt number was achieved for perforated fins with two square holes. Moreover, it was concluded that increase of Reynolds number notably increases the heat transfer coefficient and Nusselt number. The total drag force imposed to plain fins was higher than the force imposed to perforated fins. As a result, by changing plain fins into perforated fins, the pressure decreases due to passage of the flow through the pins, and accordingly, the total drag force imposed to the fins decreases. Finally, it was revealed that attaching some pins on the plain fins along the passing flow will decrease the pressure, while notably increase the heat transfer. Furthermore, it can reduce the fins’ weight and price.

Keywords

  • Convection heat transfer,
  • Reynolds number,
  • Nusselt number,
  • Total drag force,
  • Turbulent flow
HTML PDF

References

  1. Zohuri (2016) Springer https://doi.org/10.1007/978-3-319-29838-2
  2. Sahu et al. (2015) Benchmarking CNC machine tool using hybrid-fuzzy methodology: a multi-indices decision making (MCDM) approach (pp. 28-46) https://doi.org/10.4018/IJFSA.2015040103
  3. Tahseen et al. (2014) Performance predictions of laminar heat transfer and Pressure drop in an in-line flat tube bundle using an adaptive neuro-fuzzy inference system (ANFIS) model (pp. 85-97) https://doi.org/10.1016/j.icheatmasstransfer.2013.11.007
  4. Sinha et al. (2016) Enhancement of heat transfer in a fin-tube heat exchanger using rectangular winglet type vortex generators (pp. 667-681) https://doi.org/10.1016/j.ijheatmasstransfer.2016.05.032
  5. Jonsson and Moshfegh (2001) Modeling of the thermal and hydraulic performance of plate fin, strip fin, and pin fin heat sinks-influence of flow bypass (pp. 142-149) https://doi.org/10.1109/6144.926376
  6. Kays and London (1984) McGraw-Hill
  7. Velayati and Yaghoubi (2005) Numerical study of convective heat transfer from an array of parallel bluff plates (pp. 80-91) https://doi.org/10.1016/j.ijheatfluidflow.2004.05.001
  8. Razelos and Kakatsios (2000) Optimum dimensions of convecting-radiating fins: part I—longitudinal fins (pp. 1161-1192) https://doi.org/10.1016/S1359-4311(99)00089-7
  9. Wang et al. (2009) Numerical study on plate-fin heat exchangers with plain fins and serrated fins at low reynolds number (pp. 1219-1226) https://doi.org/10.1002/ceat.200900079
  10. Asako and Faghri (1994) Parametric study of turbulent three-dimensional heat transfer of arrays of heated blocks encountered in electronic equipment (pp. 469-478) https://doi.org/10.1016/0017-9310(94)90081-7
  11. Kitto and Robertson (1989) Effects of maldistribution of flow on heat transfer equipment performance (pp. 18-25) https://doi.org/10.1080/01457638908939688
  12. Ranganayakulu and Seetharamu (1999) The combined effects of longitudinal heat conduction, flow nonuniformity and temperature nonuniformity in crossflow plate-fin heat exchangers (pp. 669-678) https://doi.org/10.1016/S0735-1933(99)00053-6
  13. Ranganayakulu and Seetharamu (1999) The combined effects of wall longitudinal heat conduction, inlet fluid flow nonuniformity and temperature nonuniformity in compact tube-fin heat exchangers: a finite element method (pp. 263-273) https://doi.org/10.1016/S0017-9310(98)00156-2
  14. Mueller (1987) Effects of some types of maldistribution on the performance of heat exchangers (pp. 75-86) https://doi.org/10.1080/01457638708962795
  15. Shah and London (1980) Effects of nonuniform passages on compact heat exchanger performance (pp. 653-659) https://doi.org/10.1115/1.3230319
  16. Khan and Li (2017) Optimal design of plate-fin heat exchanger by combining multi-objective algorithms (pp. 1560-1572) https://doi.org/10.1016/j.ijheatmasstransfer.2017.01.031
  17. Cho et al. (2017) Optimization of layer patterning on a plate fin heat exchanger considering abnormal operating conditions (pp. 1036-1048) https://doi.org/10.1016/j.applthermaleng.2017.08.084
  18. Mueller and Chiou (1988) Review of various types of flow maldistribution in heat exchangers (pp. 36-50) https://doi.org/10.1080/01457638808939664
  19. Wais (2016) Influence of fin thickness and winglet orientation on mass and thermal efficiency of cross-flow heat exchanger (pp. 184-195) https://doi.org/10.1016/j.applthermaleng.2016.03.109
  20. Han et al. (2013) A numerical study on compact enhanced fin-and-tube heat exchangers with oval and circular tube configurations (pp. 686-695) https://doi.org/10.1016/j.ijheatmasstransfer.2013.06.049
  21. Čarija et al. (2014) Heat transfer analysis of fin-and-tube heat exchangers with flat and louvered fin geometries (pp. 160-167) https://doi.org/10.1016/j.ijrefrig.2014.05.026
  22. Yeom et al. (2016) Enhanced heat transfer of heat sink channels with micro pin fin roughened walls (pp. 617-627) https://doi.org/10.1016/j.ijheatmasstransfer.2015.09.014
  23. Wang et al. (2015) Heat transfer and friction characteristics of the microfluidic heat sink with variously-shaped ribs for chip cooling (pp. 9547-9562) https://doi.org/10.3390/s150409547
  24. Salehi, S.: Simulation of Air-to-Air Plate Heat Exchangers for Analyzing the Possibility of Baffle Installation, Analyzing the Effects of Input Duct Shape and Geometry of Used Fins on the Heat Exchanger Performance, Master’s thesis, Sharif Industrial University, Tehran, Iran (2012)
  25. Das and Ghosh (2012) Thermal design of multistream plate fin heat exchangers-a state-of-the-art review (pp. 284-300) https://doi.org/10.1080/01457632.2012.611451
  26. Mohammad Zamani, G.: Modeling and Controlling Plate Heat Exchanger, Master’s thesis, Sharif Industrial University, Tehran, Iran (1994)
  27. Butterworth D.: Design and application of twisted tube exchangers. In: European Research Meeting on the Future Needs and Developments in Heat Exchanger Technology—Advances in Industrial Heat Transfer, IChemE, pp. 87–95 (1996)
  28. Chen, Y.S., Kim, S.W.: Computation of Turbulent Flows Using an Extended k-ε Turbulence Closure Model, Report No. NASA CR-179204, Universities Space Research Association, Washington, D.C., USA (1987)
  29. Launder and Spalding (1974) The numerical computation of turbulent flows (pp. 269-289) https://doi.org/10.1016/0045-7825(74)90029-2
  30. El-Sayed et al. (2002) Investigation of turbulent heat transfer and fluid flow in longitudinal rectangular-fin arrays of different geometries and shrouded fin array (pp. 879-900) https://doi.org/10.1016/S0894-1777(02)00159-0