10.1007/s40095-020-00359-9

Synthesis of gasoline range fuels by the catalytic cracking of waste plastics using titanium dioxide and zeolite

  • Peter E. Nwankwor1,
  • Immaculata O. Onuigbo1,
  • Chikaodili E. Chukwuneke1,
  • Muhammad Falalu Yahaya1,
  • Bolade O. Agboola1,
  • Wan Jin Jahng*1,
  1. Petroleum Chemistry Department, American University of Nigeria, Yola, NG

Published in Issue 2020-09-20

How to Cite

Nwankwor, P. E., Onuigbo, I. O., Chukwuneke, C. E., Yahaya, M. F., Agboola, B. O., & Jahng, W. J. (2020). Synthesis of gasoline range fuels by the catalytic cracking of waste plastics using titanium dioxide and zeolite. International Journal of Energy and Environmental Engineering, 12(1 (March 2021). https://doi.org/10.1007/s40095-020-00359-9
Crossref
Scopus
Google Scholar
Europe PMC

Abstract

Abstract The current study examined the carbon recycling application of waste materials. Thermal catalytic cracking reactions were carried out in a fixed bed to synthesize gasoline-range hydrocarbon fuels from used plastics. Titanium (IV) oxide (TiO 2 ) and zeolite were tested as catalysts for pyrolysis using low-density polyethylene (LDPE), polyvinylchloride (PVC), and polystyrene (PS) reactants. In addition to the catalyzed pyrolysis reactions, we also investigated non-catalyzed thermal degradation of the plastic substrates for negative control. The liquid yield, reaction temperature profile, and physical appearance of the synthesized liquid products were determined. The pyrolysis reactions demonstrated that the optimum catalyst–polymer ratio is 40%. The distillate collection temperatures ranged between 82 and 198 °C (LDPE), 68–172 °C (PVC), and 40–168 °C (PS). Our experiments showed that LDPE, PVC, and PS can readily be pyrolyzed to produce 44% (LDPE), 13% (PVC), and 89% (PS) hydrocarbon liquid products using zeolite catalyst. Gas chromatography–mass spectrometry (GC–MS) was used to analyze the structure and chemical composition of the products. The main products were C 5 (1,2-dimethylcyclopropane), C 6 (2-methylpentane), C 7 (1,3-dimethylcyclopentene, 1-heptene), and C 8 (2-octene, 4-octene, octane, 3-ethylhexane), indicating gasoline-range hydrocarbon molecules. The highest liquid yield of 89.3% was obtained from zeolite catalyst over polystyrene in comparison to all plastics cracked while the lowest liquid yield of 3.9% was obtained from the cracking of PVC under no catalyst condition.

Keywords

  • Plastic pyrolysis,
  • Thermal catalytic cracking,
  • Waste-to-energy,
  • Metal oxide catalysts,
  • Fixed bed reactor,
  • Carbon recycle

References

  1. Tullo (2011) GLOBAL TOP 50 (pp. 12-15) https://doi.org/10.1021/cen-v089n030.p012
  2. Andrady and Neal (2009) Applications and societal benefits of plastics (pp. 1977-1984) https://doi.org/10.1098/rstb.2008.0304
  3. Geyer et al. (2017) Production, use, and fate of all plastics ever made https://doi.org/10.1126/sciadv.1700782
  4. Barnes et al. (2009) Accumulation and fragmentation of plastic debris in global environments (pp. 1985-1998) https://doi.org/10.1098/rstb.2008.0205
  5. Miskolczi and Nagy (2012) Hydrocarbons obtained by waste plastic pyrolysis: comparative analysis of decomposition described by different kinetic models (pp. 96-104) https://doi.org/10.1016/j.fuproc.2012.04.031
  6. Miandad et al. (2019) Catalytic pyrolysis of plastic waste: moving toward pyrolysis based biorefineries https://doi.org/10.3389/fenrg.2019.00027
  7. Kumar and Singh (2011) Recovery of hydrocarbon liquid from waste high density polyethylene by thermal pyrolysis (pp. 659-667) https://doi.org/10.1590/S0104-66322011000400011
  8. Rehan et al. (2017) Effect of zeolite catalysts on pyrolysis liquid oil (pp. 162-175) https://doi.org/10.1016/j.ibiod.2016.11.015
  9. Gackowski et al. (2018) Hierarchical zeolites Y obtained by desilication: porosity, acidity and catalytic properties (pp. 282-288) https://doi.org/10.1016/j.micromeso.2017.11.051
  10. Boronat and Corma (2019) What is measured when measuring acidity in zeolites with probe molecules? (pp. 1539-1548) https://doi.org/10.1021/acscatal.8b04317
  11. Busca (2017) Acidity and basicity of zeolites: a fundamental approach (pp. 3-16) https://doi.org/10.1016/j.micromeso.2017.04.007
  12. Vas et al. (2017) Production of high grade liquid fuel for CI engine by thermo-catalytic cracking of waste plastic (pp. 81-87) https://doi.org/10.5923/j.ep.20170703.05
  13. Almustapha and Andrésen (2012) Recovery of valuable chemicals from high density polyethylene (HDPE) Polymer: a catalytic approach for plastic waste recycling (pp. 263-267) https://doi.org/10.7763/ijesd.2012.v3.228
  14. Li et al. (2017) Fe-, Ti-, Zr- and Al-pillared clays for efficient catalytic pyrolysis of mixed plastics (pp. 800-809) https://doi.org/10.1016/j.cej.2017.02.113
  15. McNamara et al. (2016) Controlling the pyrolysis conditions of microporous/mesoporous MIL-125 to synthesize porous, carbon-supported Ti catalysts with targeted Ti phases for the oxidation of dibenzothiophene (pp. 594-602) https://doi.org/10.1021/acs.energyfuels.5b01946
  16. Survey G (2016) Mineral commodity summaries 2016. Government Printing Office
  17. Bagheri et al. (2014) Titanium dioxide as a catalyst support in heterogeneous catalysis https://doi.org/10.1155/2014/727496
  18. Anuar Sharuddin et al. (2016) A review on pyrolysis of plastic wastes (pp. 308-326) https://doi.org/10.1016/j.enconman.2016.02.037
  19. Wong et al. (2017) Conversion of low density polyethylene (LDPE) over ZSM-5 zeolite to liquid fuel (pp. 71-82) https://doi.org/10.1016/j.fuel.2016.12.008
  20. Yu et al. (2016) Thermal degradation of PVC: a review (pp. 300-314) https://doi.org/10.1016/j.wasman.2015.11.041
  21. Ji et al. (2020) Effects of transition metal oxides on pyrolysis properties of PVC (pp. 211-220) https://doi.org/10.1016/j.psep.2020.04.010
  22. Honus et al. (2018) Pyrolysis gases produced from individual and mixed PE, PP, PS, PVC, and PET—Part II: fuel characteristics (pp. 361-373) https://doi.org/10.1016/j.fuel.2018.02.075
  23. Yao and Ma (2017) A new approach to transforming PVC waste into energy via combined hydrothermal carbonization and fast pyrolysis (pp. 1156-1165) https://doi.org/10.1016/j.energy.2017.10.008
  24. Nisar et al. (2019) Fuel production from waste polystyrene via pyrolysis: kinetics and products distribution (pp. 236-247) https://doi.org/10.1016/j.wasman.2019.03.035
  25. Lerici et al. (2015) Chemical catalyzed recycling of polymers: catalytic conversion of PE, PP and PS into fuels and chemicals over H-Y (pp. 297-303) https://doi.org/10.1016/j.mspro.2015.04.076
  26. Diebold (2003) Structure and properties of TiO2 surfaces: a brief review (pp. 681-687) https://doi.org/10.1007/s00339-002-2004-5
  27. Jan et al. (2009) Titanium dioxide/zeolite catalytic adsorbent for the removal of NO and acetone vapors (pp. 1186-1193) https://doi.org/10.3155/1047-3289.59.10.1186
  28. Al-Harbi et al. (2015) The photocatalytic activity of TiO2-Zeolite composite for degradation of dye using synthetic UV and Jeddah sunlight https://doi.org/10.1155/2015/565849
  29. Zhang et al. (2015) Gasoline-range hydrocarbons produced from microwave-induced pyrolysis of low-density polyethylene over ZSM-5 (pp. 33-42) https://doi.org/10.1016/j.fuel.2014.12.013
  30. Arabiourrutia et al. (2012) Characterization of the waxes obtained by the pyrolysis of polyolefin plastics in a conical spouted bed reactor (pp. 230-237) https://doi.org/10.1016/j.jaap.2011.12.012
  31. Aguado et al. (2002) Wax formation in the pyrolysis of polyolefins in a conical spouted bed reactor (pp. 1429-1437) https://doi.org/10.1021/ef020043w
  32. Shah et al. (2005) Catalytic pyrolysis of low-density polyethylene with lead sulfide into fuel oil (pp. 329-333) https://doi.org/10.1016/j.polymdegradstab.2004.08.016
  33. Onwudili et al. (2009) Composition of products from the pyrolysis of polyethylene and polystyrene in a closed batch reactor: effects of temperature and residence time (pp. 293-303) https://doi.org/10.1016/j.jaap.2009.07.008
  34. Fakinle et al. (2017) Changes in evaporative emissions from gasoline in the Nigeria market (pp. 1040-1046) https://doi.org/10.1080/10916466.2017.1305405
  35. Santos et al. (2014) An overview of heavy oil properties and its recovery and transportation methods (pp. 571-590) https://doi.org/10.1590/0104-6632.20140313s00001853