10.1007/s40095-014-0079-3

Impact of the insulation materials’ features on the determination of optimum insulation thickness

HTML PDF
  • Jérôme Barrau*1,
  • Manel Ibanez1,
  • Ferran Badia1,
  1. Applied Physics Section of the Environmental Sciences Department, University of Lleida, Lleida, 25001, ES
Cover Image

Published in Issue 2014-04-04

How to Cite

Barrau, J., Ibanez, M., & Badia, F. (2014). Impact of the insulation materials’ features on the determination of optimum insulation thickness. International Journal of Energy and Environmental Engineering, 5(2-3 (July 2014). https://doi.org/10.1007/s40095-014-0079-3
Crossref
Scopus
Google Scholar
Europe PMC

HTML views: 28

PDF views: 96

Abstract

Abstract The optimum thickness of the building envelope insulation materials depends on a large number of parameters. But the optimum thickness is calculated considering only economic arguments. In this paper, life-cycle assessment of the materials used in the building, and specifically the insulation ones, are included in the process to calculate the optimum insulation thickness from both environmental and energetic points of views. Within this frame, the large influence of the parameters associated with the manufacturing of the materials on the determination of the optimum thickness has been demonstrated: For all the studied cases, the insulation thickness depends in a large way on the unitary economic, energetic and environmental costs. The biggest differences in optimum thicknesses between two different insulation materials correspond to the highest differences in the unitary costs, for all the optimization points of views. The study also demonstrates that increasing values of the characteristic parameters of the manufacturing phase, which depend on the nature of the insulation materials, imply a decrease of the impact of the calculation settings, associated with the use phase of the building.

Keywords

  • Insulation materials,
  • Optimum thickness,
  • Life-cycle assessment,
  • Energy savings,
  • Environmental issues
HTML PDF

References

  1. Database of consumption of energy of the European Union (2012) Eurostat. European Commission.
  2. http://epp.eurostat.ec.europa.eu/statistics_explained/index.php/Consumption_of_energy
  3. . Accessed 20 Feb 2013
  4. Wang et al. (2007) Cost-effectiveness assessment of insulated exterior walls of residential buildings in cold climate (pp. 143-149)
  5. Ghrab-Morcos (2005) CHEOPS: a simplified tool for thermal assessment of Mediterranean residential buildings in hot and cold seasons (pp. 651-662) https://doi.org/10.1016/j.enbuild.2004.09.020
  6. Mohsen and Akash (2001) Some prospects of energy savings in buildings (pp. 1307-1315) https://doi.org/10.1016/S0196-8904(00)00140-0
  7. Al-Homoud (2005) Performance characteristics and practical applications of common building thermal insulation materials (pp. 353-366) https://doi.org/10.1016/j.buildenv.2004.05.013
  8. Kaynakli (2012) A review of the economical and optimum thermal insulation thickness for building applications (pp. 415-425) https://doi.org/10.1016/j.rser.2011.08.006
  9. Bolattürk (2008) Optimum insulation thicknesses for building walls with respect to cooling and heating degree-hours in the warmest zone of Turkey (pp. 1055-1064) https://doi.org/10.1016/j.buildenv.2007.02.014
  10. Yu et al. (2009) A study on optimum insulation thicknesses of external walls in hot summer and cold winter zone of China (pp. 2520-2529) https://doi.org/10.1016/j.apenergy.2009.03.010
  11. Bolattürk (2006) Determination of optimum insulation thickness for building walls with respect to various fuels and climate zones in Turkey (pp. 1301-1309) https://doi.org/10.1016/j.applthermaleng.2005.10.019
  12. Özkan and Onan (2011) Optimization of insulation thickness for different glazing areas in buildings for various climatic regions in Turkey (pp. 1331-1342) https://doi.org/10.1016/j.apenergy.2010.10.025
  13. Çomaklı and Yüksel (2003) Optimum insulation thickness of external walls for energy saving (pp. 473-479) https://doi.org/10.1016/S1359-4311(02)00209-0
  14. Al-Khawaja (2004) Determination and selecting the optimum thickness of insulation for buildings in hot countries by accounting for solar radiation (pp. 2601-2610) https://doi.org/10.1016/j.applthermaleng.2004.03.019
  15. Ucar and Balo (2010) Determination of the energy savings and the optimum insulation thickness in the four different insulated exterior walls (pp. 88-94) https://doi.org/10.1016/j.renene.2009.07.009
  16. Ozel (2011) Effect of wall orientation on the optimum insulation thickness by using a dynamic method (pp. 2429-2435) https://doi.org/10.1016/j.apenergy.2011.01.049
  17. Al-Sanea and Zedan (2011) Improving thermal performance of building walls by optimizing insulation layer distribution and thickness for same thermal mass (pp. 3113-3124) https://doi.org/10.1016/j.apenergy.2011.02.036
  18. Al-Sanea et al. (2005) Effect of electricity tariff on the optimum insulation-thickness in building walls as determined by a dynamic heat-transfer model (pp. 313-330) https://doi.org/10.1016/j.apenergy.2004.10.014
  19. Dombaycı et al. (2006) Optimization of insulation thickness for external walls using different energy-sources (pp. 921-928) https://doi.org/10.1016/j.apenergy.2005.10.006
  20. Ozel (2011) Thermal performance and optimum insulation thickness of building walls with different structure materials (pp. 3854-3863) https://doi.org/10.1016/j.applthermaleng.2011.07.033
  21. Mahlia et al. (2007) Correlation between thermal conductivity and the thickness of selected insulation materials for building wall (pp. 182-187) https://doi.org/10.1016/j.enbuild.2006.06.002
  22. (2003) Directive 2002/91/EC of the European Parliament and of the Council of 16 December 2002 on the Energy Performance of Buildings. Off J Eur Union L 001:65–71
  23. Çomaklı and Yüksel (2004) Environmental impact of thermal insulation thickness in buildings (pp. 933-940) https://doi.org/10.1016/j.applthermaleng.2003.10.020
  24. Dombaycı (2007) The environmental impact of optimum insulation thickness for external walls of buildings (pp. 3855-3859) https://doi.org/10.1016/j.buildenv.2006.10.054
  25. Ardente et al. (2008) Building energy performance: a LCA case study of kenaf-fibres insulation board (pp. 1-10) https://doi.org/10.1016/j.enbuild.2006.12.009
  26. Anastaselos et al. (2009) An assessment tool for the energy, economic and environmental evaluation of thermal insulation solutions (pp. 1165-1171) https://doi.org/10.1016/j.enbuild.2009.06.003
  27. Ostermeyer Y, De Schryver A, Wallbaum H (2011) Optimal insulation thicknesses according to different indicators for Germany. In: Towards life cycle sustainability management, life cycle management (LCM), Berlin, Germany.
  28. http://www.lcm2011.org/papers.html
  29. . Accessed 16 Jan 2013
  30. Petersdorff C, Boermans T, Harnisch J (2002) The contribution of mineral wool and other thermal insulation materials to energy saving and climate protection in Europe. Report by ECOFYS.
  31. http://www.eurima.org/
  32. . Accessed 16 Jan 2013
  33. (2012) Online available BEDEC database, Spain, Catalonia Institute of Construction Technology. (ITeC).
  34. http://www.itec.es/nouBedec.e
  35. . Accessed 16 Jan 2013
  36. CSTB (2012) INIES, French database for environmental and health characteristics of construction products.
  37. http://www.inies.fr
  38. . Accessed 16 Jan 2013
  39. (2007) Technical Guide for consumption accounting. Institute for Energy Diversification and Saving (IDAE).
  40. http://www.minetur.gob.es/energia/
  41. . Accessed 16 Jan 2013
  42. (2007) Technical guide on procedure for regular inspection of energy efficiency for boilers. Institute for Energy Diversification and Saving (IDAE).
  43. http://www.idae.es/
  44. . Accessed 17 Jan 2013
  45. Ahorro y Eficiencia Energética en Invernaderos (2008) Instituto para la Diversificación de la energía (IDAE).
  46. http://www.idae.es/
  47. . Accessed 17 Jan 2013
  48. Boletín Oficial del Estado (BOE). Nº 314, Section I, p. 89609. 31/12/2012. Ministerio de Industria Energía y Turismo, Tarifa de Último Recurso del Gas Natural.
  49. http://www.boe.es/
  50. . Accessed 17 Jan 2013