10.1186/2251-6832-4-23

Development and performance evaluation of mixed-mode solar dryer with forced convection

HTML PDF
  • Chandrakumar B Pardhi*1,
  • Jiwanlal L Bhagoria2,
  1. Department of Mechanical Engineering, Sagar Institute of Science, Technology and Research (SISTec-R), Bhopal, 462044, IN
  2. Department of Mechanical Engineering, Maulana Azad National Institute of Technology (MANIT), Bhopal, 462051, IN
Cover Image

Published in Issue 2013-05-01

How to Cite

Pardhi, C. B., & Bhagoria, J. L. (2013). Development and performance evaluation of mixed-mode solar dryer with forced convection. International Journal of Energy and Environmental Engineering, 4(1 (December 2013). https://doi.org/10.1186/2251-6832-4-23
Crossref
Scopus
Google Scholar
Europe PMC

HTML views: 46

PDF views: 163

Abstract

Abstract Based on preliminary investigations under controlled condition of drying experiments, a mixed-mode solar dryer with forced convection using smooth and rough plate solar collector was constructed. This paper describes the development of dryer considerations followed by the results of experiments to compare the performance of the smooth and the roughed plate collector. The thermal performance of solar collector was found to be poorer because of low convective heat transfer from the absorber plate to air. Artificial rib roughness on the underside of the absorber plate has been found to considerably enhance the heat transfer coefficient. The absorber plate of the dryer attained a temperature of 69.2°C when it was studied under no-load conditions. The maximum air temperature in the dryer, under this condition, was 64.1°C. The dryer was loaded with 3 kg of grapes having an initial moisture content of 81.4%, and the final desired moisture content of 18.6% was achieved within 4 days while it was 8 days for open sun drying. This prototype dryer was designed and constructed to have a maximum collector area of 1.03 m 2 . This solar dryer been be used in experimental drying tests under various loading conditions.

Keywords

  • Mixed mode,
  • Forced convection dryer,
  • Solar collector,
  • Grapes
HTML PDF

References

  1. Bennamoun and Belhamri (2003) Design and simulation of a solar dryer for agriculture products (pp. 259-266) https://doi.org/10.1016/S0260-8774(02)00466-1
  2. El-Shiatry et al. (2002) Drying fruits and vegetables with solar energy in Egypt (pp. 61-64)
  3. Akoy et al. (2006) University of Bonn
  4. Mujumdar and Law (2010) Drying technology: trends and applications in postharvest processing 3(6) (pp. 843-852) https://doi.org/10.1007/s11947-010-0353-1
  5. Bolaji and Olalusi (2008) Performance evaluation of a mixed-mode solar dryer, AU Journal of Technology, a Publication of Assumption University, Bangkok 11(4) (pp. 225-231)
  6. Bolaji (2005) Federal University of Technology
  7. Sarsavadia (2007) Development of a solar-assisted dryer and evaluation of energy requirement for the drying of onion (pp. 2529-2547) https://doi.org/10.1016/j.renene.2006.12.019
  8. Tripathy and Kumar (2009) Modeling of heat transfer and energy analysis of potato slices and cylinders during solar drying (pp. 884-891) https://doi.org/10.1016/j.applthermaleng.2008.04.018
  9. Sreekumar et al. (2008) Performance of indirect solar cabinet dryer (pp. 1388-1395) https://doi.org/10.1016/j.enconman.2008.01.005
  10. Abene et al. (2004) Study of a solar air flat plate collector: use of obstacles and application for the drying of grape (pp. 15-22) https://doi.org/10.1016/j.jfoodeng.2003.11.002
  11. Ramana Murthy (2009) A review of new technologies, models and experimental investigations of solar driers 13(4) (pp. 835-844) https://doi.org/10.1016/j.rser.2008.02.010
  12. Karim and Hawlader (2005) Drying characteristics of banana: theoretical modelling and experimental validation (pp. 35-45) https://doi.org/10.1016/j.jfoodeng.2004.09.010
  13. Smitabhindu et al. (2008) Optimization of a solar-assisted drying system for drying bananas (pp. 1523-1531) https://doi.org/10.1016/j.renene.2007.09.021