10.1186/2251-6832-3-6

Experimental investigations of butanol-gasoline blends effects on the combustion process in a SI engine

Show Details XML HTML PDF
  • Simona Silvia Merola*1,
  • Cinzia Tornatore1,
  • Luca Marchitto1,
  • Gerardo Valentino1,
  • Felice Esposito Corcione1,
  1. Istituto Motori-CNR, Naples, 80125, IT
Cover Image

Published in Issue 2012-05-21

How to Cite

Merola, S. S., Tornatore, C., Marchitto, L., Valentino, G., & Corcione, F. E. (2012). Experimental investigations of butanol-gasoline blends effects on the combustion process in a SI engine. International Journal of Energy and Environmental Engineering, 3(1 (December 2012). https://doi.org/10.1186/2251-6832-3-6
Crossref
Scopus
Google Scholar
Europe PMC

HTML views: 60

PDF views: 141

Abstract

Abstract Fuel blend of alcohol and conventional hydrocarbon fuels for a spark-ignition engine can increase the fuel octane rating and the power for a given engine displacement and compression ratio. In this work, the influence of butanol addition to gasoline in a port fuel injection, spark-ignition engine was investigated. The experiments were realized in a single-cylinder ported fuel injection spark-ignition (SI) engine with an external boosting device. The optically accessible engine was equipped with the head of a commercial SI turbocharged engine with the same geometrical specifications (bore, stroke and compression ratio) as the research engine. The effect on the spark ignition combustion process of 20% and 40% of n-butanol blended in volume with pure gasoline was investigated through cycle-resolved visualization. The engine worked at low speed, medium boosting and wide-open throttle. Fuel injections both in closed-valve and open-valve conditions were considered. Comparisons between the parameters related to the flame luminosity and the pressure signals were performed. Butanol blends allowed working in more advanced spark timing without knocking occurrence. The duration of injection for butanol blends was increased to obtain a stoichiometric mixture. In open-valve injection condition, the fuel deposits on intake manifold and piston surfaces decreased, allowing a reduction in fuel consumption. BU40 granted the performance levels of gasoline and, in open-valve injection, allowed to minimize the abnormal combustion effects including the emission of ultrafine carbonaceous particles at the exhaust. In-cylinder investigations were correlated to engine out emissions.

Keywords

  • Optical diagnostics,
  • Cycle-resolved visualization,
  • PFI SI boosted engine,
  • Butanol-gasoline blend,
  • Injection timing
HTML PDF

References

  1. Veloo et al. (2010) A comparative experimental and computational study of methanol, ethanol, and n-butanol flames 157(10) (pp. 1989-2004) https://doi.org/10.1016/j.combustflame.2010.04.001
  2. Ramey (1998)
  3. Yacoub et al. (1998) The performance and emission characteristics of C1–C5 alcohol–gasoline blends with matched oxygen content in a single cylinder spark ignition engine (pp. 363-379) https://doi.org/10.1243/0957650981536934
  4. Gautam and Martin (2000) Emission characteristics of higher-alcohol/gasoline blends (pp. 165-182) https://doi.org/10.1243/0957650001538263
  5. Gautam and Martin (2000) Combustion characteristics of higher-alcohol/gasoline blends (pp. 497-511) https://doi.org/10.1243/0957650001538047
  6. Dernotte et al. (2010) Evaluation of butanol–gasoline blends in a port fuel-injection, spark-ignition engine 65(2) (pp. 345-351) https://doi.org/10.2516/ogst/2009034
  7. Szwaja and Naber (2010) Combustion of n-butanol in a spark-ignition IC engine (pp. 1573-1582) https://doi.org/10.1016/j.fuel.2009.08.043
  8. Alasfour (1997) Butanol - a single-cylinder engine study: availability analysis 17(6) (pp. 537-549) https://doi.org/10.1016/S1359-4311(96)00069-5
  9. Alasfour (1998) NOx emission from a spark-ignition engine using 30% iso-butanol – gasoline blend: Part 1: preheating inlet air 18(5) (pp. 245-256) https://doi.org/10.1016/S1359-4311(97)00081-1
  10. Alasfour (1998) NOx emission from a spark-ignition engine using 30 % iso-butanol – gasoline blend: Part 2: ignition timing 18(8) (pp. 609-618) https://doi.org/10.1016/S1359-4311(97)00082-3
  11. Broustail et al. (2011) Experimental determination of laminar burning velocity for butanol and ethanol iso-octane blends (pp. 1-6) https://doi.org/10.1016/j.fuel.2010.09.021
  12. Yang et al. (2011) The performance analysis of an engine fueled with butanol-gasoline blend
  13. Wigg et al. (2011) Emissions characteristics of neat butanol fuel using a port fuel-injected, spark-ignition engine
  14. Dagaut and Togbé (2008) Oxidation kinetics of butanol–gasoline surrogate mixtures in a jet-stirred reactor: experimental and modeling study (pp. 3313-3321) https://doi.org/10.1016/j.fuel.2008.05.008
  15. Lapuerta et al. (2005) Determination of light extinction efficiency of diesel soot from smoke opacity measurements (pp. 2048-2055) https://doi.org/10.1088/0957-0233/16/10/021
  16. Heywood (1988) McGraw-Hill
  17. Checkel and Dale (1989) 1989
  18. Brunt et al. (1998) Gasoline engine knock analysis using cylinder pressure data
  19. Mittal et al. (2007) Phenomena that determine knock onset in spark-ignition engines
  20. Merola et al. (2009) Knocking diagnostics in the combustion chamber of boosted port fuel injection spark ignition optical engine 49(1–3) (pp. 70-90) https://doi.org/10.1504/IJVD.2009.024241
  21. Merola et al. (2011) Experiments on knocking and abnormal combustion through optical diagnostics in a boosted spark ignition port fuel injection engine 12(1) (pp. 93-101) https://doi.org/10.1007/s12239-011-0012-1
  22. Henein and Tagomori (1999) Cold-start hydrocarbon emissions in port-injected gasoline engines (pp. 563-593) https://doi.org/10.1016/S0360-1285(99)00003-9
  23. Behnia and Milton (2001) Fundamentals of fuel film formation and motion in SI engine induction systems 42(15–17) (pp. 1751-1768) https://doi.org/10.1016/S0196-8904(01)00041-3
  24. Costanzo and Heywood (2005) Mixture preparation mechanisms in a port fuel injected engine
  25. Gold et al. (2000) Mixture preparation strategies in an optical four-valve port-injected gasoline engine 1(1) (pp. 41-56) https://doi.org/10.1243/1468087001545254
  26. Nogi et al. (1988) Mixture formation of fuel injection systems in gasoline engines
  27. Meyer and Heywood (1997) Liquid fuel transport mechanisms into the cylinder of a firing port-injected SI engine during start up
  28. Merola and Vaglieco (2008) Optical investigations of fuel deposition burning in ported fuel injection (PFI) spark-ignition (SI) engine (pp. 2108-2115) https://doi.org/10.1016/j.energy.2008.08.018
  29. Merola et al. (2009) Effect of injection phasing on valves and chamber fuel deposition burning in a PFI boosted spark-ignition engine 1(1) (pp. 192-200) https://doi.org/10.4271/2008-01-0428
  30. Merola et al. (2011) Optical investigation of the effect on the combustion process of butanol-gasoline blend in a PFI SI boosted engine
  31. Irimescu (2009) Full load performance of a spark ignition engine fueled with gasoline -isobutanol blends 16(1) (pp. 151-156)
  32. Yang et al. (2009) Dyno test investigations of gasoline engine fueled with butanol-gasoline blends
  33. Morey and Seers (2010) Comparison of cycle-by-cycle variation of measured exhaust-gas temperature and in-cylinder pressure measurements (pp. 487-491) https://doi.org/10.1016/j.applthermaleng.2009.10.011
  34. Witze et al. (1990) Cycle-resolved measurements of flame kernel growth and motion correlated with combustion duration
  35. Zhu et al. (2001) Modelling characteristics of gasoline wall films in the intake port of port fuel injection engines 2(4) (pp. 231-248) https://doi.org/10.1243/1468087011545451
  36. Witze and Green (1997) LIF and flame-emission imaging of liquid fuel films and pool fires in an SI engine during a simulated cold start
  37. Merola et al. (2009) Spectroscopic investigations and high resolution visualization of the combustion phenomena in a boosted PFI SI engine 2(1) (pp. 1617-1629) https://doi.org/10.4271/2009-01-1814
  38. Gaydon (1957) Chapman and Hall Ltd
  39. Alkemade and Herrmann (1979) Hilger
  40. Dieke and Crosswhite (1962) The ultraviolet bands of OH (pp. 97-199) https://doi.org/10.1016/0022-4073(62)90061-4
  41. Gaydon and Wolfhard (1953) Mechanism of formation of CH, C2, OH and HCO radicals in flames 4(1) (pp. 211-218) https://doi.org/10.1016/S0082-0784(53)80027-5
  42. Samaniego et al. (1995) CO2* chemiluminescence in premixed flames (pp. 183-203) https://doi.org/10.1080/00102209508951901
  43. Gaydon (1940) The flame spectrum of carbon monoxide Royal Society Publishing
  44. Dixon (1963) Royal Society Publishing
  45. Kayes and Hochgreb (1999) Mechanisms of particulate matter formation in spark-ignition engines 1. Effect of engine operating conditions (pp. 3957-67) https://doi.org/10.1021/es9810991
  46. Nagle and Strickland-Constable (1962) Oxidation of carbon between 1000°-2000°C Pergamon Press
  47. Orphala and Chanceb (2003) Ultraviolet and visible absorption cross-sections for HITRAN (pp. 491-504) https://doi.org/10.1016/S0022-4073(03)00173-0
  48. Verstraete and Leger (1992) The visible and ultraviolet absorption of large polycyclic aromatic hydrocarbons 266(1) (pp. 513-519)
  49. Chappuis et al. (1997) Effects of injection timing on performance and droplet characteristics of a sixteen-valve four cylinder engine 22(4) (pp. 336-344) https://doi.org/10.1007/s003480050056
  50. Gu et al. (2012) Emission characteristics of a spark-ignition engine fuelled with gasoline-n-butanol blends in combination with EGR (pp. 611-617) https://doi.org/10.1016/j.fuel.2011.11.040