TY - EJOUR
PY - 2023
DA - November
TI - On the corrosion resistance of AISI 316L-type stainless steel coated with manganese and annealed with flow of oxygen
T2 - Journal of Theoretical and Applied Physics
VL - 10
L1 - https://oiccpress.com/journal-of-theoretical-and-applied-physics/article/on-the-corrosion-resistance-of-aisi-316l-type-stainless-steel-coated-with-manganese-and-annealed-with-flow-of-oxygen-2/
DO - 10.1007/s40094-016-0213-0
N2 - AbstractAISI 316L-type stainless steel was coated with 300-nm-thick Mn thin films and post-annealed at 673 K with a constant flow of oxygen (250 cm3/min). The films crystallographic and morphological structures were analyzed using X-ray diffraction (XRD) and atomic force microscopy (AFM) before corrosion test and scanning electron microscopy (SEM) after corrosion test. Corrosion behavior of the samples in 0.3, 0.5 and 0.6 M NaCl solutions was investigated by means of potentiodynamic and electrochemical impedance spectroscopy (EIS) techniques. Results showed that the corrosion inhibition of annealed Mn/SS316L in all NaCl solutions with different concentrations is higher than that of bare SS316L. A correlation is achieved between the structural variation of the films with the potentiodynamic and EIS corrosion results.
IS - 2
PB - OICC Press
KW - Thin Film, Annealing, Corrosion resistance, Electrochemical impedance spectroscopy (EIS), MnO, Potentiodynamic, Stainless steel 
EN -