skip to main content
Menu
JTAP-01.10.2023

Journal of Theoretical and Applied Physics (JTAP)

Editor-in-Chief: Davoud Dorranian

Online ISSN: 2251-7235

Print ISSN: 2251-7227

Publishes Bimonthly

Original Article
The Effect of Annealing in Magnetic Field on FePt3 and CoPt3 Nanoparticles

FePt3 and CoPt3 compound nanoparticles were studied, magnetically and structurally. Compound ordering in crystal structure of these nanoparticles is formed at 600ºC. Meanwhile, the shape and size of grains are prominent to be controlled. In this work, layers of FePt3 and CoPt3 nanoparticles with thicknesses of respectively 20nm and 10nm were fabricated on Si wafer, […]

182423
The texture ordering in L10-FePt–Ag nanocomposites

AbstractL10-FePt nanoparticles with different Ag percentages were prepared. The presence of 6% Ag in co-sputtering process with deposition rate of 1 A˙/sdocumentclass[12pt]{minimal} usepackage{amsmath} usepackage{wasysym} usepackage{amsfonts} usepackage{amssymb} usepackage{amsbsy} usepackage{mathrsfs} usepackage{upgreek} setlength{oddsidemargin}{-69pt} egin{document}$$ {dot{A}}/ ext{s} $$end{document} at 500 °C led to the formation of FePt nanoparticles with 5–7 nm size in L10-fct phase. Moreover, Ag atoms laying in boundaries of […]

Comparing the structural and magnetic properties of FePt/MgO/Si and FePt/Ag/Si granular nanolayers

AbstractThe properties of L10-FePt nanoparticles can be improved in the presence of MgO and Ag interlayers in direct sputtering and annealing method, respectively. Such properties are crystal and compound ordering, nanostructure and crystal orientation. In this work, FePt nanoparticles in ferromagnetic L10-fct phase were synthesized using sputtering method on Ag and MgO layers. According to […]

Capacitive properties of zinc oxide thin films by radiofrequency magnetron sputtering

AbstractThe study focused on the production of zinc oxide (ZnO) thin films as a dielectric material for use in metal–insulator–semiconductor capacitors. The objective of this study has demonstrated the frequency dependence of conductivity and capacity. Zinc oxide (ZnO) was thin films deposited by a silicon wavelength sputteringmagnetron cathode sputtering. The capacitive properties of ZnO zinc […]

Effect of silver thickness on structural, optical and morphological properties of nanocrystalline Ag/NiO thin films

AbstractSilver (Ag) nanolayers were deposited on nickel oxide (NiO) thin films by DC magnetron sputtering. The thickness of Ag layers was in range of 20–80 nm by variation of deposition time between 10 and 40 s. X-ray diffraction results showed that the crystalline properties of the Ag/NiO films improved by increasing the Ag film thickness. Also, atomic […]

Structural and optical characterization of ZrO2 thin films grown on silicon and quartz substrates

AbstractZirconium oxide thin films were grown successfully by thermal annealing of zirconium thin films deposited on quartz and silicon substrates by direct current magnetron sputtering technique. The structural and optical properties in relation to thermal annealing times were investigated. The X-ray diffraction patterns revealed that structure of films changes from amorphous to crystalline by increase […]

Effect of substrate temperature on structural, morphological and optical properties of deposited Al/ZnO films

AbstractAl-doped ZnO (Al/ZnO) thin film is a promising alternative to an ITO electrode in solar cell applications due to its low price, non-toxicity and other promising properties. In this paper, Al/ZnO thin films at different substrate temperatures were deposited on glass substrates as transparent conducting (TCO) films by DC magnetron sputtering. The effect of substrate […]

The effect of varying temperature and O2 flow rate in ex situ annealed tin-doped indium for fabrication of commercial grade indium tin oxide

AbstractIn this work, tin-doped indium was deposited on a glass substrate via the electron beam evaporation technique. Then, the as-grown thin films were baked in the presence of oxygen at different O2 flow rates and temperatures inside a furnace to obtain transparent conducting oxide thin film structures. The electrical and optical properties of the layers […]