skip to main content
Menu
ijic-11.10.2023-1

International Journal of Industrial Chemistry (IJIC)

Editor-in-Chief: Akbar Esmaeili, PhD

Online ISSN: 2228-5547

Print ISSN: 2228-5970

Publishes Quarterly


Volume 10 (2019)

Issue 2, June 2019

Original Article
Multi-response central composite design of the mineralization and removal of aniline by subcritical water oxidation method

Aniline is used by many industrial organizations and is released into the environment in high amounts and pollutes the water. Due to the damages to human health, there is a need for effective and environmentally friendly methods to remove this compound from the water. The aim of this work is to mineralize and remove aniline […]

Original Article
Dynamic simulation and control of two-series industrial reactors producing linear low-density polyethylene

One of the leading routes for producing polyolefins is through gas-phase catalytic fluidized bed reactors. In this study, the industrial gas-phase ethylene polymerization reactor series of Jam Petrochemical Company has been dynamically analyzed, modeled and controlled. The copolymerization of ethylene with 1-butene is defined on Zeigler–Natta catalyst, assuming a double active site mechanism. To serve […]

Original Article
Preparation and application of metal ion-doped CoMgAl-hydrotalcite visible-light-driven photocatalyst

Preparation and application of CoMgAl-hydrotalcites have been studied. In this paper CoMgAl-LDHs photocatalysts were prepared by co-precipitation. Various techniques such as UV–visible spectrometry (UV–vis), BET, differential thermal gravimetric analysis, scanning electron microscopy analysis and X-ray diffraction were used to investigate the catalytic activity, structure, and composition of the prepared samples. The photocatalysts were developed as […]

Original Article
Inhibitory effect of Senecio anteuphorbium as green corrosion inhibitor for S300 steel

The present work proposes the study of the extract of Senecio anteuphorbium (SA) as green corrosion inhibitor. This inhibitory effect of SA extract on the corrosion of S300 steel in hydrochloric acid 1 M has been evaluated by using the potentiodynamic polarization and electrochemical impedance spectroscopy. From the outcome of the polarization curves, SA extract acts […]

Original Article
Amine contaminants removal using alginate clay hybrid composites and its effect on foaming

Heat stable salts such as total organic acids (TOA) and heavy metals are well known contaminants in the acid gas removal systems operating using alkanolamines such as methyldiethanolamine (MDEA, 50 wt%). Decontamination of TOA and heavy metals from lean MDEA always remain as a challenge to the gas industry, as accumulation of TOA deteriorates the solvent […]

Original Article
Synthesis and investigations of heterocyclic compounds as corrosion inhibitors for mild steel in hydrochloric acid

The corrosion inhibition of mild steel in 0.5 M hydrochloric acid by six synthesized heterocyclic compounds was studied using weight loss measurements. The inhibition efficiency exceeded 95%. The excellent inhibitor performance was attributed to the formation of protection adsorption films on the steel surface. The structures of compounds were confirmed by Fourier transform infrared and nuclear […]

Original Article
Application of (polyaniline/zeolite X) composite as anticorrosion coating for energy recovery devices in RO desalination water plants

Reverse osmosis desalination water plants have several operational issues such as corrosion in many areas like energy recovery devices that are accustomed to restore energy and scale back prices. Thus, there is a necessity to reduce the corrosion rate of the devices utilized in energy recovery. This study focuses on protection of some metals and […]

Original Article
Thermal performance of a micro heat exchanger (MHE) working with zirconia-based nanofluids for industrial cooling

An experimental investigation was performed with the view to assess the heat transfer characteristics of a water-based nanofluid in a micro heat exchanger employed to quench a high heat flux heater for industrial and microelectronic cooling applications. The experiments were conducted at heat fluxes 10–70 kW/m2 and for nanofluids at various mass concentrations of 0.1–0.3% and […]

XML