High-end applications require a very tall vertical extraction column in some cases which deteriorates protection against radiation and cannot be employed for indoor applications. On the other hand, horizontal extraction columns offer higher efficiency and pretension, but lower maximum throughput. In order to address this issue, the L-shaped pulsed extraction column is a new type […]
Inhibition action of seroquel on corrosion of zinc in 0.1 M HCl solution was investigated using weight loss, electrochemical potentiodynamic polarization and impedance spectroscopic techniques. Corrosion inhibition efficiency showed the positive effect with increase in concentration of inhibitor and with the increase in temperature. Results obtained from all the methods are in good agreement with […]
The corrosion and corrosion inhibition of Pb and Pb–In alloys in HCl solution, were investigated. The study was performed in the absence and presence of the phytic acid (PA) inhibitor using potentiodynamic polarization and electrochemical impedance spectroscopy measurements, and complementary by scanning electron microscope (SEM) and X-ray spectroscopy analysis (EDX) investigations. The obtained outcomes showed […]
One of the serious problems in polybutadiene rubber (PBR) production units is the color change in products, which is due to aging and the inability of antioxidants to protect the product, especially at high temperatures. In this study, the effects of amine-type antioxidant [octylated diphenylamine (OD)] and non-amine-type antioxidant (Irganox 1520) on the color yellowness, […]
ETI Aluminyum A.Ş., the primary aluminium manufacturer of Turkey, is also one of the major integrated plants of the world capable of performing production from mining until end product. The alumina refinery was designed on a certain boehmitic bauxite quality basis. However, bauxite properties have changed over the years, resulting in the urgent need for […]
The use of fermenters at large scale is usually hampered by sub-optimal conditions in terms of yield and productivity, along with the low tolerance of strains to process stresses, such as substrate and product toxicity, and other fermentation inhibitors. Attempts to improve the industrial efficacy of fermenters have been in the areas of genetic engineering […]
A new hetero-Fenton type GO/Fe2V4O13 was developed and characterized by FT-IR, XRD, HR-SEM, TEM, and UV-DRS analysis. XRD pattern reveals the presence of monoclinic phase of Fe2V4O13 in the catalyst. TEM images show the particle sizes in the range from 20 to 100 nm and the nice dispersion of nanosized Fe2V4O13 particles on the surface of […]
Porous magnesium oxide was synthesized by a combustion method, with Mg(NO3)2, ethylene glycol and deionized water as reactants, and characterized by X-ray diffraction, infrared spectroscopy, scanning electron microscopy, transmission electron microscopy and nitrogen sorption/desorption. The results showed that the as-prepared porous magnesium oxide has the multi-scale porous size with a large BET surface area of […]
