<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ArticleSet PUBLIC "-//NLM//DTD PubMed 2.7//EN" "https://dtd.nlm.nih.gov/ncbi/pubmed/in/PubMed.dtd">
<ArticleSet>
<Article>
<Journal>
<PublisherName>OICC Press</PublisherName>
<JournalTitle>International Journal of Energy and Environmental Engineering</JournalTitle>
<Issn>2251-6832</Issn>
<Volume>8</Volume>
<Issue>4 (December 2017)</Issue>
<PubDate PubStatus="epublish">
<Year>2017</Year>
<Month>10</Month>
<Day>28</Day>
</PubDate>
</Journal>
<ArticleTitle>Parameters identification of a photovoltaic module in a thermal system using meta-heuristic optimization methods</ArticleTitle>
<VernacularTitle></VernacularTitle>
<FirstPage></FirstPage>
<LastPage></LastPage>
<ELocationID EIdType="doi">10.1007/s40095-017-0252-6</ELocationID>
<Language>EN</Language>
<AuthorList>
<Author>
<FirstName>Mohcene</FirstName>
<LastName>Bechouat</LastName>
<Affiliation>Laboratoire des télécommunications, Université 8 Mai 1945 Guelma, Guelma, DZ</Affiliation>
<Identifier Source="ORCID"></Identifier>
</Author>
<Author>
<FirstName>Abdelaziz</FirstName>
<LastName>Younsi</LastName>
<Affiliation>Laboratoire des télécommunications, Université 8 Mai 1945 Guelma, Guelma, DZ</Affiliation>
<Identifier Source="ORCID"></Identifier>
</Author>
<Author>
<FirstName>Moussa</FirstName>
<LastName>Sedraoui</LastName>
<Affiliation>Laboratoire des télécommunications, Université 8 Mai 1945 Guelma, Guelma, DZ</Affiliation>
<Identifier Source="ORCID"></Identifier>
</Author>
<Author>
<FirstName>Youcef</FirstName>
<LastName>Soufi</LastName>
<Affiliation>Labget Laboratory, Department of Electrical Engineering, University of Tebessa, Tebessa, DZ</Affiliation>
<Identifier Source="ORCID"></Identifier>
</Author>
<Author>
<FirstName>Laatra</FirstName>
<LastName>Yousfi</LastName>
<Affiliation>Laboratory Inverses Problems: Modeling, Information and Systems (PI: MIS), University of Tebessa, Tebessa, DZ</Affiliation>
<Identifier Source="ORCID"></Identifier>
</Author>
<Author>
<FirstName>Ismail</FirstName>
<LastName>Tabet</LastName>
<Affiliation>Unité de Recherche Appliquée en Énergies Renouvelables, URAER, Centre de Développement des Énergies Renouvelables, CDER, Ghardaïa, 47133, DZ</Affiliation>
<Identifier Source="ORCID"></Identifier>
</Author>
<Author>
<FirstName>Khaled</FirstName>
<LastName>Touafek</LastName>
<Affiliation>Unité de Recherche Appliquée en Énergies Renouvelables, URAER, Centre de Développement des Énergies Renouvelables, CDER, Ghardaïa, 47133, DZ</Affiliation>
<Identifier Source="ORCID"></Identifier>
</Author>
</AuthorList>
<PublicationType>Journal Article</PublicationType>
<History>
<PubDate PubStatus="received">
<Year>2017</Year>
<Month>10</Month>
<Day>28</Day>
</PubDate>
</History>
<Abstract>Abstract
Experimental studies confirm that the obtained electrical power by a conventional photovoltaic PV system is progressively degraded when the temperature of its cells is increased. The water-cooled photovoltaic thermal PVT system is therefore proposed to avoid the voltage drop at high temperature. The use of single diode PV/PVT models in simulation software becomes indispensable to analyze its performances where several climatic conditions such as environmental temperature and solar radiation variations should be considered. An optimal set of PV/PVT model parameters are determined through experimental data using two evolutionary computation algorithms; genetic algorithm and particle swarm optimization algorithm. Furthermore, the robustness of the given PV/PVT model should be analyzed. The predicted electrical properties by the proposed PVT model are compared with those given by the conventional PV model at its operating cell conditions and also at several rigid atmospheric conditions.</Abstract>
<ObjectList>
<Object Type="keyword">
<Param Name="value">Photovoltaic system</Param>
</Object>
<Object Type="keyword">
<Param Name="value">Photovoltaic thermal system</Param>
</Object>
<Object Type="keyword">
<Param Name="value">Modelization</Param>
</Object>
<Object Type="keyword">
<Param Name="value">Identification</Param>
</Object>
<Object Type="keyword">
<Param Name="value">Genetic algorithm</Param>
</Object>
<Object Type="keyword">
<Param Name="value">Particle swarm optimization algorithm</Param>
</Object>
</ObjectList>
</Article>
</ArticleSet>